The wheel of the car is the necessary part, which in symbiosis with the bus is a device that converts external energy to the useful work on the movement of the vehicle. Each owner of the car must have basic information about this element and know which ones are rationally suitable for the purchased Lada Vesta. Below will feature photos of domestic new items on different wheels. Disks on Lada Vesta are divided into two types:

• The first type includes cast wheels, which are manufactured by the method of casting in the form of a certain diameter. Material for creation often appear: aluminum, magnesium, and also, in rare cases, titanium alloys. After the slowdown process, it is necessary to conduct a heat treatment session. The final look of the disks are obtained after mechanical stripping and staining process. The cost of such parts is the most optimal.
• Stamped discs represent the second type. They are made of steel sheets of the format of ST-3. Two halves with holes are welded and become integrity. Straighten with a sledgehammer or specialized machine. This item has a lot of weight, but it is easy to resist and pressure. The main minuses will be subject to corrosion and poor balancing, which can lead to unpleasant consequences when driving at high speed.

Interesting!

On the territory of the Russian Federation, aluminum plants in Krasnoyarsk and Sayanogorsk are engaged in the production of wheel details, as well as the largest concern for Titan's processing, which is VSMPO abbreviation. The first place in quality is occupied by Germany, Italy and the USA.

Effect on tire size and wheels

West discs cause a specific action to manifest some categories:

• An increase in the diameter and width of the disk, as well as the width of the tire significantly increases the overall view of the external form. It improves the adhesion with the road and the accuracy of the steering.
• The driver clearly will feel discomfort if it will move on disks of smaller size than they were installed. This lack compensates for the expansion of the tire itself.
• Noise from the road does not depend on changing the size of the wheels. However, with an increase in the width of the disk and the tire increases the consumption of fuel on any surface.

If you consider the photo of Lada Vesta on 17 disks, you can immediately note the addition of courageous dynamism and unsurpassed style. Accordingly, it is necessary to purchase and tires 17 sizes. One such automotive "shoes" will cost 5 000 r. And the goods from a foreign workshop with an exclusive style can cost big money (14-16 thousand rubles).

The photo of Lada Vesta on 18 discs found in the network immediately after demonstrating the concept car in 2015 at the automotive exhibition in Moscow. Such a volume of casting inspires the colossal respect for the product, as it creates the impression that the wheels are the most important detail.

On a note!

The eighteenth disk element and the wheel R17 are not installed for Lada Vesta sedan in the factory conditions, but the owner has the right to give an extraordinary look to choose and mount those. It is likely that such "shoes" at Sports-Kare or SUV from the domestic concern.

Wheels from the manufacturer and purchased by the owner

For the Lada West sedan, there are R15 discs and wheels R16. Stamped wheels are mounted only for the first option. They are installed on the cheapest modifications of new products from AvtoVAZ. Alloy (R15 and R16) are available for more advanced and expensive complete sets of "Comfort" and "Suite". The photographs clearly visible the difference between these elements. The vehicle operating manual provides useful data on wheel items on the axis of the chassis.

• Alloy wheels 15 Radius in Lada Vesta, installed by the factory manufacturer, are equipped with a capacity index of 560 kg (not confused with a capacity). Tire pressure at full and partial load is 0.21 and 0.22 MPa, respectively. These details are mounted today for all the configuration of the four-door sedan from the Togliatti concern. All these indicators are equally related to the "stamp" disks (fifteen radius).
• Alloy wheels 16 radius in Lada Vesta, put on the plant conveyor, have a large lifting index - 615 kg. Tire pressure is similar - 0.21 / 0.22.

On a note!

If the owner decided to change the wheels on his car, it is necessary to understand that 15-inch discs have a limit in the maximum speed index - 190 km / h. For R16, this indicator increases to 210 km / h. Winter tires do not allow to accelerate the vehicle beyond the limit of 160 km / h. Neglecting instructions may entail an emergency.

Balancing as a necessary security condition

This procedure performed successfully is intended to be a guarantor of getting rid of a multi-mulite during a high speed and subsequent car crash. In addition to the steering wheel, shock absorbers and other elements of the chassis.

The balancing procedure is necessary at least once a year. It is mandatory when changing tires. The main reason for the wicker of the wheel becomes rubber wear and subsequent casting deformations. For operation, contact bus service.

Combination of the Lada Vesta Body Palette and Wheel Elements

Today it is very often engaged in the decoration of the car by combining contrasts and various shades in the design. The manufacturer went to meet the aesthetics lovers and began to produce casting in a diverse color decision.

So that the discs on the white Lada Vesta loosely looked at, recommend buying the wheels of the contrasting black tone. This interesting solution is easy to divide the running part of the body itself. Discs on black Lada Vesta in priority should be white, which is bright and stylish to highlight your vehicle from a huge number of cars on the highway and in the city.

Where to purchase detail

Milling and "stamping" of ordinary diameter (R15 / R16) is sold on specialized Internet sites, as well as in the salons of the official supplier of spare parts from AvtoVAZ. Stamped discs on Lada Vesta are the cheapest in the assortment. Their price begins about 1300 rubles. You can buy alloy wheels on Lada Vesta in stores for 2,500 p. The range of this product on the shelves is huge, which will allow each owner to find a suitable wheel of his car.

R18 discs, as well as R17 wheels have a higher cost (from 5 000 r.) And low-profile rubber, which is very sensitive to the irregularities of the roadway. They are installed on the axis of the chassis part to visually allocate an attractive part of the car.

Lada Vesta on the casting from the Lada on the stamped wheels is distinguished by the best design and quality, so the consumer has a large selection field. Which of them buy, solves the potential owner. In addition, it is possible to first consider the desired photos, and after the product image is live.

In 2016, AvtoVAZ announced the creation Lada Vesta. and Lada Xray. In exclusive versions. The first cars were presented at the car dealership Lada "Exclusive". Innovation of models - 17 inches discs. To date, Lada Xray is already actively put such wheels, but Vesta is still being content with only 16 inches.

In the light of these events, a reasonable question arises: how to increase the wheel diameter affect the car suspension? AvtoVAZ does not give a response to this question. Let's try to figure it out on your own.

The maximum permissible size of the disks for Lada Vesta - 195/55 R16.
The auto show was presented with Weste with Hankook 225/50 tires. Presumably the size of the West Wheels exclusive will be 205/50.

As a rule, an increase in the dimension of the disk has a positive effect on handling. This is due to the reduction of the fuel supply of the wheel in the side. Also increases the volume of braking mechanism.
By increasing the diameter of the disk on Vesta, the engineers most likely wanted to betray the "sharpness" of the control system.

It should be remembered that with an increase in the mass of the wheels, the speaker is lost. If the dimension changes are insignificant, as in our case, then the consequences are practically invisible.

However, how will the suspension be changed in the new version of Vesta?

Now the velve suspension is done in such a way as to balance its running characteristics as much as possible. It greatly affects the smoothness of the machine and on its handling.

Thanks for the subscription!

Of course, everyone knows that an increase in the diameter of the disk is not always accompanied by an increase in the wheel. Sometimes low-profile rubber dress up on a large disk diameter. In this case, only the appearance of the car, and, in part, handling. However, there is a significant minus - the irregularities of roads. Any pit or bump leads to damage.

Consider the inverse situation - with an increase in the size of the wheel disc, the wheel itself increases. In this case, the car will slowly accelerate and slow down, but the maximum speed can increase a little.

The large diameter of the disk is not always a big weight. Here you need to look at the whole wheel in the aggregate. However, the weight of the wheel of 17 inches on the new Vesta will be slightly more than 16 inch. On the car suspension, we practically do not notice. Basically, it will be possible to feel changes on a bad road.

The exterior style depends not only on the type of body color, some tuning elements, but also the appearance of the wheels, and in particular disks. However, approaching the selection of these components should be not only from the aesthetic values, but also corresponding to the size of the factory requirements of VAZ Vesta sedan 1.6 2015, as well as performance indicators. In the latter case, on the background of stamping, products made of alloy alloy metals are largely won. However, financially not every motorist can afford them.

Read more about the assortment presented

Regarding forged products, alloy wheels in Moscow are inexpensive structures, but they are expensive than motorists compared to steel rims. However, they are in great demand in connection with the possibilities of casting technology to produce real masterpieces on the style of alloy products. Lightweight designs are able to become the main highlight of the exterior of VAZ Vesta sedan 1.6 2015. They have a worthy resistance of corrosion, which you can not say about steel disks, and demonstrate excellent running quality.

Machine rims made of aluminum or titanium alloy, which are valued by excellent physicochemical properties. At the same time, in terms of strength, these alloyed metals are not particularly inferior to steel. With alloy wheels, the owner of VAZ Vesta Sedan 1.6 2015 may not worry for the safety of high-speed indicators.

In addition, alloy wheels are valued by fuel efficiency, which is ensured by the ease of construction and the low rolling resistance coefficient. In addition, they have excellent thermal conductivity, which makes it possible to prevent the likelihood of overheating brake and driving systems. This property allows drivers to feel somewhat more confidence in the safety of movement. Alloy products are balanced and have a high accuracy of geometric parameters.

Choice complexity

Such a wide range of discs, which is offered today domestic and foreign manufacturers create certain difficulties when buying components in Moscow. After all, sometimes brands for the same technical characteristics of products exhibit completely different prices. However, is the quality of the quality indicators?

On the website of the Wheel Dair online store, you can familiarize yourself with various reviews of motorists who have already managed to evaluate all the advantages and disadvantages of various discs on Vaz Vesta sedan 1.6 2015 and make your choice. You can also consult with the competent managers of our store, which will be able to not just pick up the optimal version of the wheels in quality and cost, but will answer all the questions that arise.

When choosing disks, it is worth noting the importance of the quality factor, which you move. If you have to overcome the extreme difficulties of relief daily, it makes sense to give preference only by budget stamped components.

If you have a limited budget can always be purchased more affordable by price, but no less high-quality replica. Moreover, today many brands create copies of original wheels, which are not inferior in the performance of the operational characteristics of "native" details.

Why should you buy discs in Moscow?

We propose not to waste time for long searching for reliable distributors of automotive components and order wheel items in the Wheel Dair online store. We have a wide range of models of discs of various types from the time-tested manufacturers. We are sure that you will be satisfied with the quality of our service and directly acquired goods.

M s set out logical issues: how to increase the increase in the diameter of the disk to the tight masses and, accordingly, on the suspension resource; Whether additional tests were carried out, during which the engineers decided to upgrade nodes, or tests showed that the increase in dimension would not affect the "hodovka" state.

These questions were sent to the press service of the auto plant. Were shipped twice. But we have not received any response after five days. Therefore, we decided to bring the opinion of the Observer Experts "Wheel" and ask you, our readers, what you think about this.

Currently, the maximum dimension of the wheels available to equip Vesta is 195/55 R16. At the Lada stand, a sedan was set on 17 disks, "shoes" into the rubber Michelin 205/50.

However, on official images of Vesta Exclusive, equipped with 17-inch wheels, but with Rubber Hankook 225/50. We assume that the dimension of the tire in the serial Vesta in the new modification will be 205/50.

Now directly to the comments of our experts.

Losses in dynamics, comfort and economy are connected mainly with an increase in the mass of the wheels, if the increase will be minimal, then the negative consequences will be insignificant. The increased price of wheels and rubber in any case is offset by the buyer. But whether AvtoVAZ will rebuild the suspension, taking into account the changes of the elastic characteristics of the wheels and their mass - a big question.

Today Vesta has a very well-developed suspension from the point of view of the balance of running characteristics. Will the car maintain its advantages in the form of a very successful combination of smoothness and manageability will show time and tests.

But not always low-profile tires - good. Almost any bodie is a "hernia" or through damage, sometimes - a disk geometry disorder with a subsequent rolling (which also does not bring the use disk).

Now consider the situation when the diameter of the entire wheel grows with the increasing disk diameter.

This is reflected immediately on many parameters: on acceleration, maximum speed, braking, fuel consumption. Start a little more "lie" speedometer, however, not critical. If short, then all the parameters will be worse, only the maximum speed can be a little increasing. Yes, and the clearance will be higher. Otherwise, everything is much sadder: the car accelerate will be worse, and it will noticeably.