Another useful homemade product for children has been added to our collection - a wooden motorcycle, which every child, and perhaps some of the adults, will be happy with :) The past summer was not productive for manufacturing for a number of family reasons (disassembling and assembling furniture, etc.) and worth fixing on. However, by the time his grandson arrived at the dacha for the first time, he managed to assemble a small toy from what was found. The wheels are spinning, the steering wheel turns, the ignition key (from with a sawn-off beard) is there, but I and my grandson can talk tr-r-ttr. Photo-view straight ahead.

The design is clear and visible from the presented photo. Almost everything is made of dry pine boards 130 x 40 mm. Imitation of motor cooling fins made of 20 x 10 mm strips. The exhaust pipe is made of polypropylene pipes and the steering wheel is made of it. On the pipe and the rudder, sections HERE (heat-shrinkable tubes) are installed and heated by an industrial FEN. Wheels from the same board-photo 3.

Wheel diameter 280 mm. To simulate tires and for a soft ride, rubber from the tube on glue and staples. Wheel axles - 150 mm nails cut to length. They are not fixed and can be pulled out freely and then he takes a hammer and, under my guidance, tries to hammer it into place. Headlight cover from Nescafe. The steering wheel turns on the axis by about 30 degrees. on both sides. Seat padded and upholstered. The motorcycle, of course, is heavy, however, the grandson can handle it (he is 3 years 6 months old). At the bottom of the frame there is a hinged fixed footrest. The photo is a playful moment and on the right foot of the father, who wanted to help his son, who himself coped with the "accident".

Boasting your own small but real motorcycle or car is every child's dream. It is worth noting that this technique will delight not only boys but girls as well. When people talk about small bikes, they mean children's motorcycles with gasoline. This is far from a plastic toy, but a real motorcycle, which has a small size and small engine displacement.

Most adults who are thinking about buying a gasoline-powered mini-motorcycle for children probably never dreamed of such toys in childhood. A few years ago, it was impossible to imagine that such a motorcycle would appear. However, progress never stands still, delighting humanity with all kinds of innovations, affecting absolutely any category of people. Thanks to the unimaginable variety of products for the little ones, we can make childhood unforgettable, for example, by giving a child a petrol-powered crossover motorcycle.

Such a technique will be an excellent gift for a baby, because at a very young age, everyone seeks to imitate adults. The boys begin to take an example from their father, considering him the wisest and most courageous. Girls want to become like their mother, learn how to cook deliciously and keep the house clean. It is today that there is an excellent opportunity to make a child feel like an adult, because there are all kinds of children's vacuum cleaners, kitchens, electric cars and even children's motorcycles on gasoline on sale.

The history of mini-bikes

Today the market for goods for the little ones can offer a huge range of gasoline-powered motorcycles for children. The history of their creation began in distant Japan, and they were not intended at all for children. Mini bikes were designed for local racing. The first models appeared in workshop-garages, where motorcycle enthusiasts assembled bikes in artisanal conditions and from scrap materials. Small dimensions significantly improved performance, including maneuverability, making it possible to quickly overcome small city streets. A little later, teenagers began to pay attention to self-made models, which led to an incredible demand for children's mini-motorcycles on gasoline. And already in the middle of the 70s of the XX century, several companies from the United States established their production. Modern children's motorcycles on gasoline are produced not only in the American continent, but also in Europe and Asia.

How to choose a motorcycle

If you are in the mood for buying a gasoline motorcycle for children, the price and build quality of such a bike is what you first look at. You should not choose more famous brands and assume that a high price is the key to a successful purchase. Any technique tends to break down, regardless of the manufacturer's brand. It is necessary to focus on the quality of the frame, the stability of the model, technical characteristics and weight.

Classification

There are several options for bikes for children. A battery-powered motorcycle can be purchased for toddlers. It is great for children between the ages of two and four. In terms of its characteristics and appearance, it vaguely resembles a real bike, which cannot be said about a "toy" with a gasoline engine, which is an exact copy of motor vehicles for adults. The price of a children's motorcycle on gasoline also differs significantly from the cost of models with an electric motor: from 25 to 75 thousand rubles, depending on the configuration and manufacturer. Such units are equipped with both two-stroke and four-stroke engines and are intended for children over four years old. At the moment, you can buy the following versions of a children's motorcycle with gasoline:

• mini-cross;
• pocket bike;
• pit bike;
• mini ATV;
• mini chopper.

Top Models

Perhaps the best motorcycles for the young generation of bikers are the models presented by KTM. This brand creates devices that are suitable for children of all ages.

The top three is the KTM 50 SX, which is a great option for small riders between the ages of four and ten. On this model, the child will be able to learn to drive, and then significantly increase his driving level. The motorcycle is equipped with an automatic clutch. It is incredibly easy to operate, which allows you to quickly learn how to balance.

A more powerful model, which received a high-spirited engine, the volume of which is equal to 64.9 cm 3, is the KTM 65 SX. The bike is intended for children over twelve years old. Here is a more complex manual transmission that has six speeds. Having learned to ride such a motorcycle, a child will have no difficulty in handling an adult bike.

The most powerful and fastest model is the KTM 85 SX 17/14. This is a miniature copy of a sports bike with real suspension and professional braking system.

Children's sportbikes

Sports motorcycles for young audiences are equipped with wide wheels for better stability. The design has a wide frame and a modern control system. Some models have the same power-to-weight ratio as professional sportbikes. To control such motorcycles, you need to have certain driving skills, as well as be able to fully concentrate on the road.

These bikes are powerful enough to accelerate to a speed of 24 km / h. Therefore, when wondering how much a gasoline-powered children's motorcycle costs, you need to consider the cost of a protective suit and helmet, which will help avoid serious injuries. You should not save on the health of your child.

Kids cross bikes

As a rule, cross-country motorcycles are used in sporting events, as well as for riding on rough terrain. They are as lightweight as possible, have a high-spirited and powerful engine, which allows you to overcome various difficult off-road areas, for example, swampy areas, sand dunes, etc. Taking into account the wishes of teenagers, the designers decided to create children's cross-country bikes, which in their characteristics are very similar to “older brothers ". They are just as reliable, have a great suspension, a solid frame and a powerful motor, which is usually two-stroke. A boy who has decided to become a motorcycle racer can start training at the age of six, if, of course, his parents give their go-ahead.

Safety

Despite the fact that such motorcycles have engines with a small volume, and are also equipped with speed limiters, you need to take care of the safety of the child. The best option would be models with a remote control. If your little one has gone too far or you have noticed a dangerous obstacle, you can turn off the engine using the remote control. It is also recommended to purchase a helmet and protective suit that will save the child from possible injury in the event of a fall from a motorcycle.

To please their baby and make everyday walks in the park more interesting and enjoyable, today any parent can purchase a children's motorcycle with a simple control scheme and a high degree of safety. These devices operate on batteries and can easily move on any level surfaces.

Radio controlled motorcycles for children

Thanks to the rapid development of technology, battery-powered child transport does not work very loudly, which makes it possible to use it both outdoors and indoors. The children's electric motorcycle has excellent build quality and everything you need for the comfort of your child. Outwardly, such transport looks like a real motorcycle in miniature, thanks to which it looks very beautiful and gives the child a lot of pleasure while moving.

If you want to buy motorcycles for children in Moscow inexpensively without excessive spending of personal time and money, then you have come to the right place. This section of our catalog contains both the most popular and new models of two-wheeled vehicles, designed for children of different ages. Depending on the modification, such a vehicle is equipped with a battery with a capacity of 6v , thanks to which it can drive without additional recharging for several hours. Two-wheeled motorcycles have a number of advantages, which are responsible for the increased demand for them:

Reliable case. Any fast battery bike has a durable and reliable body made from hard-wearing plastic in colors that cater to both boys and girls. Even with a strong mechanical impact as a result of a collision with a curb or other obstacle, the surface of the vehicle remains intact and does not lose its neat appearance.

Ease of use. Small models are equipped with a remote control module, which allows parents to control the speed and direction of their movement without any effort. Using such a transport on the remote control, you give not only your child, but also yourself a lot of positive emotions.

Huge selection of power levels. A motorcycle on rubber wheels with and without cameras, depending on the model, has a different degree of performance. When choosing transport for very little ones, you should give preference to devices with a maximum speed of 2-3 km / h, but if you need a gift for an older child, then you should order a model with a speed of up to 6 km / h.

High security. Despite the fact that motorcycles are powered by batteries, their use for everyday walks is not hazardous to the health of the child. The system excludes the occurrence of a circuit or other failures that can scare the baby or damage his health. It is worth remembering that such new devices are not recommended for use in rain, as this can cause premature wear of the battery and the main working elements.

Our online store is pleased to offer parents a huge selection of products designed for children of various age categories. In our catalog you can find out how much a particular model costs, familiarize yourself with the main characteristics and very quickly select a cross motorcycle of the required modification, taking into account the weight and age of the child.

The sale of children's transport, the price of which is affordable, and the quality meets all existing standards, we carry out in an optimally simple and understandable scheme online. To make a gift to your baby you do not need to spend a lot of time and effort, since you can buy any model of devices at low prices without even leaving your home.

Raisa Tyugashova

Dear colleagues! The best time for everyone is coming children and educators - summer. We are preparing for the summer with all our diligence. We decorate our plots, we involve parents in this. This is done by all educators in all gardens throughout Russia... But today I would not like to talk about this, but about the fact that we are also parents, grandmothers and grandfathers. And our children are brought up by other educators, in others gardens... Why don't we use our many years of experience, show irrepressible imagination and help our children, their educators in the design plot for the period of your summer stay in a preschool educational institution? Let's give joy to those who are dear to us - our kids. Let them play, have fun, be active and inquisitive.

Motorcycle built by the whole family for my granddaughter Dimka. The husband and son-in-law drove through the village to look for wheels. We found three wheels, so there will be motorcycle tricyclestable.

So to build motorcycle we needed to find wheels, a handlebar from an old bicycle, paint with a brush, boards, screws, screwdrivers, a saw, a plane - every different tool needed for carpentry.

This process will probably not be very professional to describe from a female point of view. Our men did it. The process is not quick. Everything in order. We sawed two boards of the required size, trimmed, hammered together, attached to the wheels. A steering wheel was installed on top, everyone was put on the screws.

Grandpa decided to test our harley's strength - after all, not one child will ride on it, but several at once. That's the beauty of it.

So my turn has come. Picking up a brush and dishes with green paint (they decided that it was green - it would burn out less in the sun) I painted our "horse" and safely left to dry in the fresh air.

Here we have such a handsome man.

Then dad took him to the city of Togliatti, d / s "Friendly family". There he and his family were dug on plot.

The eldest daughter took pictures, and Dimka - he is also the main culprit of this process - was the first of all the children to try it. There was no limit to happiness and pride in my family!

Our everyone liked the bike... And until now we accept thanks from parents, children and kindergarten staff... And yet joint work for someone's benefit - it ennobles!

See you. All the best!

Many people very often think about how great it would be to at least try to create their own motorcycle with their own hands, without resorting to the services of salons, masters, etc. However, often such a desire remains unfulfilled due to the motorist's uncertainty about the success of his project. That is why it is worth figuring out how to make a motorcycle without anyone's help.

Preparing to assemble the motorcycle

To begin with, you must, of course, decide what configuration the future "steel horse" will have, as well as resolve the issue with all the details and tools necessary for work. With some experience, some elements can be made independently, for example, on a milling and turning machine or by welding.

If during the assembly process an old motorcycle acts as the basis, then you should not start with the installation of small parts, cardan shafts, brake rods, etc. The best solution would be to start puttingty and painting the tanks and fenders. In order not to have problems with the motor or the parts of the box bridge, they need to be placed in kerosene for a while. A home-made motorcycle will look much more expressive and effective if its engine crankcases, covers, boxes and ignition are well polished.

The motor of the old device needs to be completely sorted out, and only then proceed to the installation of accessories, which, as a rule, include two main materials: leather and chrome.

Bicycle as the basis for a motorcycle

It's no secret that often the basis for a motorcycle is just a bicycle, which is equipped with all the necessary equipment. When thinking about how to make a motorcycle out of a bicycle, it is important to figure out which materials should be used, as well as know their technical characteristics.

Quite often you can find such an option when the engine is from a chainsaw. In this case, it is also worthwhile to study in detail its power, weight and size.

Possible list of materials for creating a motorcycle from a bicycle

So, turning a bicycle into a homemade motorcycle, the most common option for a set of parts is the following:

• engine;
• pulleys;
• drive belt and tension roller;
• fasteners.

One way or another, but making a motorcycle out of a bicycle is not a cheap pleasure, so sometimes it is better to think about whether it would be advisable to do this or whether it would be better to purchase a new moped or at least a ready-made bicycle motor.

DIY motocross bike

Despite the highest technical indicators such as a crossover, it is quite possible to assemble it with your own hands. Of course, nothing prevents you from simply buying a ready-made model, but after all, factory samples are far from always able to satisfy all the desires of a particular motorist, moreover, such a purchase will certainly cost a lot, and a home-made motorcycle will save a significant amount of financial resources. However, here it is necessary to strictly observe all the requirements for installation, otherwise the end result may be very disappointing.

The procedure for self-assembly of a motocross motorcycle

It is best to start assembling from wheels, which can be freely purchased at any motorcycle parts store. There are two most common options for attaching these elements: purchase a rim and replace the spokes, or simply install cast sports wheels on the unit.

The fork should be classic and have a full range of adjustments. The optimal size for it will be 43 mm.

In order to increase the reliability of the braking system, it is necessary to increase their power. Alternatively, sometimes the diameter of the brake disc simply increases.

Particular attention should be paid to the suspension, which is mounted on a homemade motocross motorcycle. The most suitable for it will be stock shock absorbers, which can be ordered directly from the manufacturer, but it is important to indicate the possible weight of the device in order for the suspension elements to be equipped with the appropriate springs.

When it comes to the engine, it is worth mentioning that its thrust can be increased by reducing intake losses. To ensure this, the standard paper filter in the old engine is replaced with a foam rubber one, after which the updated engine is installed in the system of the future motocross motorcycle. In addition, the carburetor is also subject to changes, which should ensure good engine operation at maximum speed.

How to make an all-terrain vehicle from a motorcycle?

Recently, the designs of all-terrain vehicles, which are made from ordinary motorcycles, have gained wide popularity. In addition to the entertainment functions that such a device carries, it is also a very reliable means of transportation.

So, motorcycles can be divided into several categories, the main of which is, of course, ATVs. These transport models surprisingly combine the mobility of a motorcycle and the stability of a car. Due to the fact that each of the wheels of the ATV has its own suspension, the device is able to overcome almost any, even the steepest, irregularities in the road.

The third type of all-terrain vehicle from a motorcycle is vehicles equipped with tracks, with the help of which you can easily move around swampy areas.

However, do not forget that any, even a home-made motorcycle is a vehicle characterized by increased cross-country ability. Therefore, in order to achieve the maximum value of this parameter, it will be enough to simply increase the cross-country ability of a standard vehicle, and the need for global modernization will disappear by itself.