Using automatic selection of tires and rims for the car Renault Sandero, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, they have a huge impact on a significant part of the vehicle's operational properties, primarily on handling, fuel efficiency and dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why their choice should be approached as responsibly as possible, that is, with knowledge of a number of parameters of these components.

Unfortunately, most car owners prefer not to get into such technical nuances. Regardless, the automatic selection system will prove to be extremely useful, as it will minimize the likelihood of incorrect selection of wheels or tires. And it is distinguished by an extraordinary variety, due to the availability of a wide range of this type of products in the Mosavtoshin online store.

Any car, including foreign cars, looks stylish and beautiful if the equipment, body parts, and interior are of a decent level. Renault Sandero is standardly equipped with sufficiently high-quality elements, but you can stand out from the general flow of cars by equipping the car with original disks.

The assortment offered by manufacturers is wide, but a good choice depends on some features of the model.

Standard sizes

Since the start of serial production in 2007, the Renault Sandero car comes off the assembly line, equipped with 14 or 15 inch disks (R14, R15), and is equipped with stamped or light-alloy versions. The advanced versions of the Renault Sandero Stepway were equipped with R16 wheels. In addition to the size of the wheel rim, there is a set of other significant technical indicators:

• width;
• bolt pattern (drilling);
• takeaway;
• central hole.

The nominal width of the Renault Sandero rim of various modifications varies between 5.5 and 6 inches (the symbol is 5.5 J or 6J). The value of the indicator affects the adhesion to the road surface, directional stability and handling.

Branded discs have 4 holes for fastening bolts, located around the circumference of the disc at a distance of 100 mm from the central axis (conventions for the parameters, respectively, LZ and PCD). Full drilling designation - LZ * PCD 4x100. An important indicator is the diameter of the hole itself, it is important when choosing bolts for the disc. Renault factory bolts are available in 12mm sizes. The holes are drilled with a tapered groove for a secure fit of the fasteners.

The offset is understood as the value in mm between the plane passing through the center of the rim width and the surface of the disc-hub connection. The offset can be positive or negative. Serial Sandero models are available with 43-50 mm offset (ET43, ET 50). The French manufacturer has a positive take-off, that is, the wheel is visually recessed into the wheel housing.

The center hole is a parameter that characterizes the diameter of the hub. For the entire Renault Sandero model range, it is 60.1 (DIA 60.1). The operation of discs with a high index is allowed with the use of special spacer rings. The alignment of the wheels, the reliability of the connection and the comfort when driving (no beating) depend on the compliance of the disks with the hub diameter.

Characteristics of standard bolts

The wheels are fastened with M12x1.25x25 metal bolts using a special wheel wrench equipped with a dynamometer. A weak force leads to unscrewing and detachment of the wheel, vibration during movement, too much tightening damages the threaded connection.

Bolt parameters indicate dimensions in millimeters: 12 - diameter, 1.25 - thread pitch, 25 - thread length. Standard bolts are produced with a tapered seat. It is important to remember that the thread length of standard bolts is often insufficient for fastening light-alloy products.

What discs can I put

The desire to improve the car, improve technical characteristics and appearance pushes motorists to search for alternatives to the factory configuration options. Stamped discs, even decorated with decorative caps, are very few people satisfy. They were replaced by products made of light alloys, which can be conditionally divided into 3 groups:

• forged;
• cast;
• prefabricated.

Alloys of magnesium, aluminum, used for their manufacture, are distinguished by lower weight, ease of removal and installation of wheels, better technical characteristics compared to stamping. Reducing the weight of products saves fuel, contributes to the dynamics of the car. Although these models are quite fragile, they are ideal for urban use.

The cast accessories shown in the photo are 20-30% lighter than their stamped counterparts, they heat up less when driving, and are easy to clean. However, the lack of compliance with impacts is fraught with chips and breakage of the discs.

The hot stamping of forged products increases their strength and resistance, but the high stiffness forces the car's suspension to take on the negative impact of the bumpy road.

The components of prefabricated models are made of materials that differ in the manufacturing method, are connected to each other with titanium or metal bolts. This technology makes it possible to replace a damaged segment of the unit. Backlash in the joints of the constituent parts increases the flexibility of the structure.

When changing the type and size of the discs, the factor of the difference in material thickness at the junction of the wheel with the hub is taken into account. There is a possibility that the length of the threaded part of the bolts will be insufficient for reliable fixation, or vice versa, they will rest against the structural parts of the machine.

Selection options

The range of wheel accessories on Renault Sandero allows you to make a smart purchase in accordance with personal priorities. In addition to design, style, aesthetic perception, it is necessary to take into account the influence of some factors:

• compliance with the technical characteristics of the vehicle. The installation of products that, with or without load, are capable of rubbing against the wheel housing part due to their increased dimensions, leads to sad consequences;
• ratio of external attractiveness to operating conditions. Models that require low-profile tires look good, but are not applicable for constant trips to the country with a maximum load of the trunk;
• the influence of the chosen model on the associated financial costs. Replacement of technological parameters of disks (diameter, width, offset) inevitably entails replacement of tires, mounting bolts;
• changing driving style. Low-profile tires, due to their wider width, improve traction with the roadway, but are more sensitive to loads when hitting deep holes on the road.

A complex perception of the consequences of switching to new accessories, including turning radius or stopping distance, helps to make the right choice.

Valid parameters

The above technological indicators of disks, regardless of whether it is an outdated model or a newfangled Stepway, determine the range of acceptable models for tuning a car.

The table provides reference values, individual deviations from the indicators are possible, especially on tuned versions of the car.

Drilling of Renault Sandero cars is unambiguously equal to 4x100. A larger deviation of the central hole is allowed when using specialized sleeve rings. The choice of the vehicle configuration option should take into account the different lengths of the threaded portion of the bolts for the standard and individual versions of the discs used.

Financial costs, worries about the literacy of the choice of disks for Renault Sandero will pay off, bring a lot of positive emotions if you follow elementary recommendations and a responsible approach to car modernization.

Any car requires timely service, especially if it is used daily. Any part in this general movement mechanism must be in good working order and, fortunately, the ability to put the car in perfect order is not a problem today. So, one of the main components of any car is its wheels, namely the tires and wheels of the car.

So let's define the main parameters that are still worth looking at in order to "change the shoes" of your car and be sure of safety on the road. I would like to pay special attention to a good car - Renault Sandero, which has become quite popular among both men and women.

In order to choose the right tires for Renault Sandero, you need to focus on the parameters of the rims, among which it is noted:

The diameter of the steel or cast disc you have chosen (in the technical documentation, the radius is R);

Ramping or drilling (look for - PCD x DCO in the documentation);

Departure (look for ET in the documentation);

Hub diameter (in the documentation it is designated - DIA);

Rim width (marked with J in the documentation).

The coincidence of the values \u200b\u200bof these parameters will save the owners in advance from damage to the suspension, deterioration of the functionality and performance of the autodisk, as well as general vehicle malfunction. In order to buy tires and wheels for Renault Sandero in Voronezh, you also need to take into account the year and modification of your car.

What tires do they put on Renault Sandero?

The size of tires on Renault Sandero can be different, depending on which of their types you prefer. So, for example, Renault Sandero 2010 (modification 1.6i) fit factory tires with parameters - 165/80 R14, 175/70 R14 and 185/70 R15, as well as no less quality tires for replacement with parameters - 185/65 R15 , 195/60 R15 and

195/55 R16. For tuning, tires with parameters - 215/45 R17 are suitable. Do not forget that it is impossible to choose a bus without considering the parameters of the disks. So, wheels for Renault Sandero can also be purchased with factory parameters -5.5 x 14 ET43 and 6 x 14 ET40 or choose suitable replacement options with parameters - 6 x 15 ET50, 6.5 x 15 ET43 and 6.5 x 16 ET45. For tuning, wheels with parameters - 7 x 17 ET40 are suitable. It is important to take into account the size of tires and wheels on Renault Sandero, because the choice depends on how the car will behave on the road. What tires to buy wider or narrower, higher or lower? The answer is simple - install the components following the manufacturer's recommendations. Indeed, when installing a tire of a smaller width or height than recommended, you run the risk of getting the following unpleasant breakdowns:

Damage to the rim;

Heavy load on absolutely all suspension and bearing assemblies;

But too wide a tire size on Renault Sandero will lead to friction of the tire on stationary parts of the body or suspension arms. In addition - this and more:

Additional fuel consumption;

Increase in variants of the aquaplaning phenomenon;

Increase in vehicle weight.

Regarding the materials from which the discs are made, they are classified into:

Stamped steel discs. Advantages - low price, disadvantages - can bend when hit hard or the car gets into a hole. A car in motion accelerates worse and slows down worse. However, they are actively used during the winter.

Forged aluminum wheels. The advantages are low weight and high strength. Disadvantages - simple design and lack of variety of options to choose from.

Alloy wheels for Renault Sandero. The benefits are a wide variety of choices and large air vents to help cool the braking system. Disadvantages - low plasticity.

To find tires and wheels for Renault Sandero in Voronezh, you can contact a reliable company that sells only high-quality products at real prices. If you have any questions or need detailed advice about what kind of tires on Renault Sandero is right for you, just call the contact phone number indicated on the company's website. A qualified manager will definitely advise you on the right tire size for Renault Sandero absolutely free of charge.

To complete the popular French car Renault Sandero, the manufacturer has provided several options for rims. Among them, you can see both stamped and more fashionable cast. The developers also do not mind the desire of the owners to install discs from other manufacturers instead of standard options. The main condition is that the products comply with the recommendations of the plant. When non-original products are used, wheel bolt is required.

Today, the network has a lot of services that allow, when setting the standard parameters of the car, to provide as offers a wide range of options for tires and wheels that suit the practical "Frenchman" Sandero. Here, convenient online tire calculators come to the rescue, which allow the buyer to accurately select the appropriate options, taking into account not only the design, but also the geometry.

Having taken up the choice of wheels, the future owner should pay attention to the following aspects:

• performance of disks or tires;
• product quality level;
• the required pressure when inflating tires;
• permissible level of maximum speed, etc.

It is not uncommon for Renault Sandero owners to lean towards tuning, replacing the standard tires complete with disks with more striking design options.

Regulatory parameters for Sandero

For Renault Sandero, the developers have provided the possibility of completing with disks with the following standard sizes: "R14", "R15", "R16" and "R17". It is the latter option that is most often used for tuning purposes, but then wheel bolt is required.

Currently, the following manufacturers have gained wide popularity:

• Trebl and Kronprinz;
• Arrivo and KFZ;
• Replica, Nitro and Alutec;
• Enzo and Dezent.

Consider Renault in the first generation (2008-2012). For this version, the manufacturer allowed the installation of "R14", "R15" and "R16" disks. All products were characterized by a hub diameter of 60.1 mm, the maximum overhang varied from 30 to 50 mm. Also, the manufacturer did not disregard the recommendation for the width of the product, which, depending on the configuration, was 5.5-6.5 inches.

The second generation of Sandero was released in 2013. Here the range of installed discs changed slightly, namely: from “R15” to “R17”, and the hub diameter remained identical - 60.1 mm. The outreach ("ET") in the new generation is 30-43 mm, and the width of the product is 6-7 inches.

Looseness and other aspects

Such an important parameter as wheel bolt pattern is of paramount importance when choosing discs, because it allows you to choose a product option that fits exactly with the Renault Sandero hub in terms of fasteners. For "our" "Frenchman" he has the formula "100/4". The decoding is not difficult: 4 fastening bolts and 100 mm in diameter, on which the centers of the holes in the hub and, accordingly, in the disk are located.

Bolt parameters are also individual:

• head - on a turnkey basis at "17";
• thread - M12 * 1.5.

Important! When installing alloy wheels, a slightly longer bolt leg length is required (2-3 turns). Also, the tightening torque must meet the requirements of the regulations.

In general, wheel bolt is not a difficult procedure at all.

Tire selection

In the standard configuration, the manufacturer uses tires with the following parameters: "165 * 80 * R14" or "185 * 70 * R14". This is true for a 1.4 liter engine.

If the Renault Sandero has a 1.6-liter engine, then here you can see tires "185 * 65 * R15". This version was most widespread in the second generation of the French bestseller.

As with wheels, tires should be selected following the manufacturer's recommendations and tolerances. Neglecting this aspect can lead not only to imbalance in driving performance, but also to a decrease in overall road safety.

We should not forget about such an important regulatory parameter as the pressure inside the tires. This figure is reflected in the manual for Renault Sandero. The owner must periodically monitor the pressure level and, if necessary, adjust it by pumping. This should be done on "cooled" wheels and a high-quality pressure gauge, not a cheap copy.

Now more about the pressure itself:

1. If the wheels are "165 * 80 * R14", then the pressure in the front and rear tires should be 2.0 bar and have the same values \u200b\u200bon the left and right sides.
2. For wheels "185 * 70 * R14" the values \u200b\u200bare as follows:

• before - 2.0 bar;
• back - 2.2 bar.

3. To inflate tires "185 * 65 * R15", a similar pressure is required:

• front - 2.0 bar.
• aft - 2.2 bar.

Let's summarize

We have analyzed the important operational and technical parameters of the wheels for Renault Sandero. This information is also valid for other models and manufacturers. Compliance with regulatory requirements is a guarantee of safety and confidence on the road, therefore, owners are not recommended to overlook the points indicated in our material. And if wheel bolt is carried out, then it must be carried out strictly according to the instructions.

At the moment, there are 843 tire modifications for Renault Sandero on Mosavtoshin with an average rating of 4.31 / 5. Add your review.

Other Renault models: Renault Alaskan, Renault Avantime, Renault Captur, Renault Clio, Renault Dokker, Renault Duster, Renault Duster Oroch, Renault Espace, Renault Fluence, Renault Grand Scenic, Renault Kadjar, Renault Kangoo, Renault Kangoo Compact, Renault Kaptur, Renault Koleos, Renault Kwid, Renault Laguna, Renault Latitude, Renault Lodgy, Renault Logan, Renault Lutecia, Renault Master, Renault Megan Scenic RX4, Renault Megane, Renault Megane Scenic RX4, Renault Modus, Renault Pulse, Renault Safrane, Renault Sandero, Renault Sandero Stepway, Renault Scala, Renault Scenic, Renault Symbol, Renault Talisman, Renault Thalia, Renault Tondar, Renault Trafic, Renault Twingo, Renault Twizy, Renault Vel Satis, Renault Wind, Renault Zoe,

Repair service:

Selection of tires and wheels for Renault Sandero 2011 1.6i I

The selection of tires and wheels for Renault Sandero 1.6i I 2011 reduces the risk of problems due to mistakes made by car owners when choosing them on their own. This is mainly due to the lack of sufficiently deep knowledge in this area, primarily about their technical parameters. This is what in many cases explains not only the difficulties in installing tires and rims, but also the deterioration in handling, an increase in fuel consumption and a decrease in dynamic qualities. The automated system for the selection of rims and tires, used on the site of the Mosavtoshina online store, contains a lot of technical characteristics about almost all modern trucks and cars. All its many advantages will become available after the user specifies the make, model, year of manufacture and modification of his vehicle.