Kia Rio of any modification (1.2 or 3) requires regular maintenance of the LUX lubrication system. In the regulations of service work, black in white, it was noted that the oil change in the engine of Kia Rio should be carried out at least 15,000 (km).

KIA service center specialists strongly recommend replacing oil and at all through 7000 - 10,000 (km). Tested in practice that the more often a change of engine oil will be carried out, the smaller wear will be exposed to the engine.

Materials and tools

1. Set of keys (need keys on 10, 13 and 17)
2. Oil filter puller
3. Filter
4. Motor oil Kia Rio (canister for 4 liters)
5. Gasket for plug
6. Capacity for spent oil (10 l bucket)

Note that the engine oil changes paired with an oil filter.

We use the Shell Helix Ultra 5W-30 lubrication on the role of oil. These are the recommendations of the manufacturer Kia Rio. In the service package for this car, it is noted that it is necessary to use 5W-30 oil not lower than class Sn or SM (note, SN marking oil is more modern lubricant).

For the role of the filter element, we use the original filter with the articulum number: 26300-35503. The following instructions will be given, how to replace the oil filter on the engine Kia Rio.

As a gasket for a plug on a pallet of the crankcase, we use the original compact, its article number: 21513-23001.

Do I need to fasten the engine?

KIA service center specialists are recommended to rinse the engine during the first self-changing oil. Who knows which lubricant was used for a hundred. When you personally begin to serve the car, you need to constantly use the same butter.

Also, flushing must be needed when the oil change in the engine Kia Rio is intentionally carried out using another lubricant. That is, a person decided to move to another oil, for some reasons. This also happens and not so rarely, as it seems.

For washing, the same oil brand is used, which will be poured as the main one. 3.3 liters will need for flushing. That is, you need to buy 2 canisters at once 4 (l). We allow one canister for flushing (such oil immediately merges into working out).

Changing oil

System of lubrication system are carried out in 3 stages:

1. Remove Carter's defense
2. We merge oil
3. We change the filter

Pay attention again, the filter element must be changed. A little further, I will tell you how to replace the oil filter on the engine Kia Rio.

Dismantling protection

• We heat the car on the overpass or the observation pit and the wasting machine
• Climbing from below and unscrew the protective plate on the crankcase, it holds on 5 bolts (fasteners for 10 and 13). This moment is marked in the photo.

• Standing the protective plate aside

We merge oil

Please note that it is necessary to warm up to the drainage of oil for 10 minutes. That is, before going to the overpass / pit, so that oil is replaced in the engine Kia Rio engine, you need to smash a little around the district. This moment is needed in order to heat the oil. Then the lubricant is obtained as low as possible and flows well.

• The wasting cars when they drove on the flight / pit
• Open the hood and unscrew the lid on the lubrication unit. Also, you can remove the probe
• We dress gloves, as the crankcase can be hot (the filter will definitely be hot)
• Weaken the drain plug (you need the key to 17)

• Applies capacity under the oil (best apply a bucket)
• Fully unscrew the drain plug
• Oil flows for 10 minutes

• If you decide to wash the engine, then we twist the cap and pour Kia Rio engine oil for flushing (3.3 l volume). We twist the cork, insert the probe back. We bring the car and wait for 3 minutes, until the oil does not procrix on the system. Next, repeat the procedure for plums of oil
• Put in place a plug with a new gasket

We change the filter element

So how to replace the oil filter on the engine Kia Rio?

• We substitute a bucket to drain testing under the filter and unscrew the cover with the key to 17

• Must pounce some oil
• Surround the filter. Usually it will be dismissed manually. If the hand does not go, then apply filter puller

• Fill in a new filter 150-200 (ml) of a new lubricant
• Lubricate the sealing ring with oil and dress it on the filter

• Screw the filter until you stop. Then you need to make a little effort and penalize the filter, how long is the power
• We dress Carter's defense
• Pour lubricant into the system (3.3 liters of new oil). An ideal option is the engine oil Kia Rio

• Twist the lid and insert the probe to the place
• We make a trial race
• We are waiting for 5 minutes while the foam is asced and check the oil level of the side. The oil level should be a little later to the maximum mark. In the case of what, pour oil

Watch the video, how the oil change is carried out in car service conditions:

Make the engine oil replacement by car Kia Rio It is possible at the maintenance station (service station) or independently. This procedure is described in a detail in the manual to the car, and does not represent much difficulty. If you take into account the price of a hundred, then it is best to produce oil to replace yourself. This will significantly save the family budget.

Usually, replacing engine oil at Kia Rio 2011-2017 do it yourselfNo different from the procedure, which is carried out at the service station. Recommended frequency of motor oil replacement at Kia Rio 15,000 km. But in practice, it is better to replace in 7000-10,000 km. This is not surprising if you take into account the condition of the roads and the city pace of the car movement with frequent stops. All these circumstances lead to a rapid deterioration in the quality of engine oil. First of all, the lubricants and cleansing oil properties deteriorate, which strongly increases the engine wear and reduces its resource. At the same time, with the replacement of motor oil, you should not forget to replace the oil filter. Oil and filter always change simultaneously on any car.

In practice, the replacement of oil on Kia Rio independently can be carried out in two ways:

- Vacuum oil pumping. Vacuum pumping, as a rule, is performed through a hole for the engine oil level. This method is good because there is no need for a lift or overpass. The main disadvantage is the need to use special equipment that is available and not at any time.

- Drain from the car's pallet. The second, traditional and proven decades the method is more reliable, since all waste is accumulated precisely in the engine pallet. Vacuum pumping is simply not able to pump out all the spent oil from the pallet.

To replace the oil, we will need:

1. Oil filter - 26300-35503.
2. Engine oil - as a rule, the official dealer is poured with barrel shell Helix Ultra 5W-30, he recommends that KIA plant. But you can buy in the usual four liter canister. When choosing an oil, it is worth considering what is indicated in the warranty: 5W-30 oil SN or SM (SN is better, since more modern standard).
3. Laying the drain plug of the engine crankcase pallet - 21513-23001
4. The key to "17" to twist the drain plug.
5. Wash oil 3 liters.

Change of oil.

The replacement process is made on a heated engine, the heated oil is more fluid and easily merges from the lubrication system.

- After a ten-minute warm-up of the engine, you need to go to the observation pit. If necessary, it is necessary, this is not done, you should unscrew several fastening bolts. It hurts us when replacing the oil filter. With a certain level of skill, it is possible to remove the protection not completely, and unscrew only two bolts of fastening to the subframe.

- Then it is necessary to drain the spent oil from the crankcase in the capacity specifically prepared for this purpose. Carter cork need to be touched very carefully, as the oil is very hot, it is better to use gloves and glasses.

- After the oil is glass, the plug can go in two ways, to replace with the use of washing oil and without it:

1. With washing butter. Tighten the drain plug before replacing the drain plug gasket, and pour about 3 liters of washing oil. Give the engine to work for about 10 minutes, and again drain the oil. (There is a way to remove the remains of washing oil, repeating the flushing procedure only at the same time using 2-2.5 liters of oil, which you will fill when replacing.).
2. Without washing oil. In this embodiment, remove the remnants of the spent oil from the crankcase, for this we use a syringe with a curved needle.

The question of the use of washing oil is in cases where it is not known which oil was flooded earlier or a transition to another oil type is made. In other cases, you can do without its use. Modern engine oils and so have detergent and cleansing properties in the required volume to clean the engine lubrication system.

- Now you can twist an oil filter for replacement. As a rule, it can be done by hand without using a special tool. Before installing the new filter, it is worth pouring 150-200 ml of oil. Then carefully screw the new oil filter with your hands. For tightening the filter of the forces of the hand, it will allow, on the next replacement it is easy to twist it with your hands.

If you remove the filter with my hands did not come out, it's not a misfortune to be a special tool or an old grandfather way. Everything is simple, we take a screwdriver thoroughly and hammer, we pierce the filter through the screwdriver and unscrew it with this lever.

- After executing all the procedures, the key to "17" is tightened with a drain plug, pre-replacing the gasket.

According to the maintenance of car maintenance regulations, the engine of the engine in the engine together with the oil filter should be carried out every 15,000 mileage kilometers. This procedure must be performed on the overpass or on the observation pit, while the car engine must be heated to the operating temperature.

Procedure during the replacement of oil and oil filter Kia Rio

First of all, we open the cover of the fuzzy neck, after which the brushed or a rag clean the surface of the crankcase pallet cover, where the drain plug is located.

Substituting a wide capacity under the pallet (approximately 3.5 liters), into which we will drain the spent oil, then with the key to 17 weaken the drain plug, after which we carefully unscrew it until the oil begins to flow out of the opening.

Within 10 - 15 minutes we give fully remove the oil from the engine crankcase.

While the oil will flow, it is necessary to conduct a drain plug revision. Pay attention to the puck if it is transmitted to replace it with a new one, otherwise it is possible to leak oil.


After, the oil will be drained, a pretty clean rifle wipe the drain plug and wrap it back, with the help of a key without much effort we produce a tightening.
The next step will be the replacement of the oil filter, for this we substitute the same container and unscrew the filter housing using a special device.

Be careful, oil will also flow from it. In some cases, the filter can be unscrewed without resorting to the help of additional devices, and use a piece of emery paper so that the hand does not slip.

We clean the place where the filter was installed, then we applied a thin layer of oil on a new filter sealing gum and twist it. It should be remembered that it is necessary to twist the filter from hand until it stops its sealing ring with a bracket, after which you cheat another quarter of turnover.

To keep the Kia Rio car engine in good condition and avoid costly breakdowns, it should be correctly serviced. One of the main motor maintenance activities is timely. The procedure is carried out according to the regulations and with the obligatory accounting of the features of operation and the current state of the car. When replacing the oil in the car "Kia Rio" car, be sure to use high-quality motor formulations and follow the instructions.

To replace oil in the engine Kia Rio, with your own hands, you will need about two hours.

Replacement frequency

Let's start with how often engine oil is changing on such a car as Kia Rio from the Korean manufacturer. If you have purchased a new car from the cabin, it is missing. Therefore, first the car will take the period of running and studying internal parts. Therefore, the first replacement is carried out after 3 thousand kilometers of the race passed. During running inside the system, small particles will form, since the parts are fully carved together and create optimal clearances. So that these particles began to destroy the engine from the inside, after 3 thousand kilometers change the oil filled from the plant. Used for Kia Rio running the original oil is a limited period of time.

Since the new warranty service machine, the first replacement procedures will be performed on authorized service station. In the future, you can drain your own hands and pour lubricant into the engine. According to the regulations, it is recommended to do this every 8 - 10 thousand kilometers, but at least 1 time in 3 to 4 years. If the machine is operated in severe conditions, the driver adheres to an aggressive driving style, then the periodicity of the replacement is reduced to 5 - 6 thousand kilometers. and the state of the engine oil. To do this, periodically check it with a dipstick.

Selection of oils

The key factor when choosing a motor oil for Kiya Rio is considered a viscosity indicator. It affects the degree of fluid flow rate. Also focus on tolerances and manufacturers. In parallel with changing the oil, do not forget to change filters. To do this, it is better to apply the official filtering elements recommended by the manufacturer. Regarding which oil to fill in the Kia Rio engine 1, 2 or 3 generations, indicates the manufacturer in the instruction manual. Experts converge that in Korean it is better to use one of the oils presented:

• Zic XQ Ls;
• Quartz;
• Divinol.

Each of the oils presented is well suitable for Kia Rio. Therefore, we advise you to choose something from these options, or look for alternative solutions with similar properties and additives. If we talk about the necessary quantity, the oil level in the engine "Kia Rio" is 3 liters. Because you will now know how much butter to take for the procedure for replacing the lubricating fluid. The mixture should always be bought with a margin in order to be able to top up the original oil as the car is operating. Mix different liquids, even with identical characteristics, is not categorically recommended. This applies to Kia Rio and any other car.

Replacement procedure

For self-replacement of oil in the Kia Rio engine, you will need to take:

• new filter element (oil filter);
• new lubricant with suitable characteristics;
• set of wrenches;
• rozhkov keys;
• rag;
• empty container for draining old lubricant;
• funnel for the Bay of Oil;
• individual protective equipment (gloves, glasses, tight clothing and closed shoes).

Replacing the lubricating fluid in Kia Rio car engines 1, 2 and 3 generations is often done with their own hands. It is not so difficult, but in time it takes no more than 2 hours of beginners. Experienced car owners spend on the procedure for about 1 hour. If you decide to change the oil yourself, follow the instructions and follow the basic rules.

The whole process can be divided into two stages:

• draining old lubricant;
• For the engine.

The most important thing is that you work carefully, they have not spilled the oil throughout the engine compartment and accidentally did not shed liquid to the floor.

1. Drive a few kilometers and stop in the garage above the pit. You can simply warm the motor in place. It must reach the operating temperature. So fluid will flow better and faster. Wait a little while all the lubricant stalks to the carder.
2. Gearbox, if it is a machine, put in the "Parking" mode. If it is a mechanic, it is enough to set neutral speed and put a car on the hand-made brake.
3. On the oil crankcase of the engine "Kia Rio" is a drain plug through which oil will flow. Before unscrew it, prepare an empty container and put the tank gently under the drain hole. When the package for draining is ready, gradually unscrew the plug.
   It's not necessary to do this quickly and sharply, otherwise the oil under pressure will fall on you, which can lead to burns. Lubrication is hot because of the engine heated at the previous stage.
4. If the motor lubricating fluid is free, it will flow around 15 minutes through the drain hole. A more viscous oil flows longer, plus you can not from the old oil. And when filling the motor with a new lubricant, they are mixed, which is not a good solution.
   
5. Next dismantled oil filter. Some remove it manually, although it is fixed quite tight. To make it easier for you, use the special exchanger for oil filters. This is a useful tool in the assortment of each car owner.
   
6. Clean the foothold for the filter with dry rags, remove the remains of the old oil.
7. Take a new filter element, apply a bit of oil onto a sealing gum and a threaded connection.
   So it is easier to enter the nest. Pre-approximately 50% fill in a new filter with fresh lubricating fluid for the Kia Rio engine.
8. If the composition did not change for a long time, then before screwing the drain plug in the pallet, it is better to change the old gasket. With further use, its tightness can break, because the oil will gradually flow.
   
9. We close the crankcase pallet cork. It does not need excessive physical strength. If you tighten too much, you can damage the threaded connection and the case of the filter itself.
10. Now we return to the incapregious space. In the engine compartment, unscrew the oil-solid neck, insert a suitable diameter to it and start to fill fresh motor lubrication. As you remember, for Kia Rio, it will take 3 liters of the mixture.
    
11. Run the engine, let it work 5 - 10 seconds. On the dashboard should go out a signal lamp with an image of the oil tree.
12. Return to the Motor and check using the probe current lubrication level. If the probe shows a deficit, make it. When the motor starts, the oil begins to be distributed through the system, which allows you to show a more accurate level.
13. It is better to look at the bottom of the car. It is necessary to check the pallet on the subject of heights from the tube or through an oil filter. If they are, try tightening them a bit. Make sure you change the sealing gaskets.
14. After a couple of days of operation of the machine with a new oil, spend control measurements of the lubricant level in the engine. This will make sure that it keeps on the right marks, there are no leaks and causes of increased lubricant consumption.

On this procedure for servicing the car "Kia Rio" can be considered completed. You spent quite a bit of strength and time, plus acquired the necessary experience. It will help you in the future to engage more serious and complex repair issues with your own hands.

Thank you all for your attention! Good luck on the roads!

Subscribe to our site, ask current issues, leave comments and tell us about our friends!

Menu

Replacing motor oil and oil filter in Kia Rio (Kia Rio)

According to the management, the frequency of oil replacement and the Kia Rio oil filter is 15,000 km of run or 12 months - depending on which it comes before.

What engine oil for Kia Rio is suitable?

Filling oil oil in engine 1.4 - 3.7 liters of new oil.

Filling oil oil in engine 1.6 - 4 liters of new oil.

If the temperature in the region falls below 35 degrees, then viscosity should be 0W30 or 0W40.

Replacing motor oil in Kia Rio independently video

Replacing the oil on Kia Rio The standard procedure of the regulation is that each owner can perform with their own hands.

Video "Step-by-step instructions Replacing Oil Kia Rio 1.4 and 1.6"

Replacing oil in the gearbox in Kia Rio

The oil is changing Kia Rio (1.4 1.6) MCPP on average every 45000-60000 km, 1.9 liters are required.

The oil is changing Kia Rio (1.4) automatic transmission on average every 45000-60000 km, 6.8 liters are required.

The oil is changing Kia Rio (1.6) automatic transmission on average every 45000-60000 km, 7.4 liters are required.

According to the regulations in Kia Rio, oil controls in the transmission is carried out by 20 thousand km, and the oil replacement by 40-60 thousand km.

We recommend using oil in MCPP Kia Rio: API 75W85 or 75W90 (link to the catalog or filters or oil)
In automatic transmission: SP-III (1.4) or SP-VI (1.6) standard oil (1.6) (reference to the catalog or filters or oil)

Replacing oil in the gearbox in Kia Rio independently video

Replacing the air and cabin filter Kia Rio

On the recommendations of the manufacturer, the air and cabin filter in Kia Rio should be changed after 15-20 thousand mileage kilometers. But not only kilometer is the basis for replacing the filter material. The conditions in which the machine is operated are important. If you are moving along a solid surface away from the metropolis in rural areas, the filter material can be changed less frequently. In large cities, where the air is polluted by exhaust gases, dust, could, replacement have to do more often.

Replacing Salonngo Filter in Kia Rio Alone Video

Replacing the cabin filter Kia Rio is a simple procedure that any car enthusiast can be performed.

Video "Step-by-step instructions Replacing the cabin filter Kia Rio"

Cooling fluid for KIA Rio

The manufacturer recommends using antifreeze with a long service life G-11 (green). For a moderate climate, the concentration must be calculated on -30 ° C, and for cold -40 °. Service life of 120,000 km of run or 2-3 years of operation. It is necessary to keep in mind that the G-11 cannot be mixed with G-12 to the cooling system of Kia Rio.

In a car with 1.4 engines, the volume of cooling system is 5.3 liters. With engine 1.6 System volume 6 liters.

Replacing coolant (antifreeze) in Kia Rio independent video

Video "Step-by-step instructions Replacing antifreeze in Kia Rio"