Installation of pneumatic suspension on Fiat Ducato

Multiple Fiat Ducato 2017 G.V. It was provided by our regular customers, Refcars on the development of full pneumatic suspension. The task is not simple but solved. The car's frame is elongated, the refresheater booth of an increased volume is installed. Now there was a task to distribute the weight of the superstructure and the weight of the boot without prejudice to the tires. The introduction of a second axis on a regular spring-sized axle package reduced maneuverability, but provided the necessary load capacity.

Pneumatic suspension As usually solved the issue of load distribution to the spring package and ensured not only comfort but also stabilization of the work of the suspension. The front axle of the car received a standard solution - this is branded pneumatic racks last generation With enhancement and taking into account minor deficiencies in early modifications. The compressor installation was postponed for the future. At the moment, the pneumatic suspension is controlled using its own compressor by pumping and fixing the pressure in pneumatic elements through the manual systems "M".

With the task, they coped in 2 days. Built 2 similar cars.

Installed equipment:
- Pneumatic racks
Modified set under this car - 2 pcs.
- manual pumping system for pneumatic elements - 3pcs.

Equipment is always available at the central warehouse of the manufacturing company Air Ride. Get detailed advice on request from our free phone professionals. hot line 8-800-333-25-74 (the call in Russia is free). Or order callback from the site.

Reviews of our buyers

1. Mikhail Chernov, Stavropol
2. PETER TANKEVICH, Moscow
3. Konstatin Ivanov, Moscow
4. Sergey Krylatov, Vyborg (Len.Obl.)
5. Gleb Seven Nizhny Novgorod
6. Nikolai Glinis, Tikhvin (Len.Obl.)

For a long time familiar with this company. I bought a set first on the gazelle, then to Fiat. They gave a good discount and now I recommend it to everyone. The first set put two years ago. Everything is working. Keep it up! Thank you!

Long chose a set on UAZ. No one really offers anything in the internet. Only these guys. I bought, put and not redeemed. The truth had to be angry but because I didn't immediately understand what. The instruction read and everything turned out. Thank you!

In early December, put the pneumatic suspension on gas lawn Next. I did not think that it would be so cool to work. The pads are not big but the blows swallow perfectly. The car does not swing. To load began without fear. All super! Thank you! I will advise friends.

I drive cargo on my Fiat Ducato 2009. Tired of changing the flames of the front racks. About the springs generally silent. I was looking for a long time, I pretended to be a friend, I advised to come to this company. Especially in Peter I dare constantly. I drove on Salov 70, found them and decided that I would do a complete pneuma. Signed the next day and took the car in two days. Do not know the car! Standing like inserted. Natal already 2500km. Flying is normal. The warranty was given and a discount in the form of a pneumatic signal. Now I ride and frighten everyone with super shoe)) Thank you! Now just for you! Well done!

I was looking for a pneumatic suspension on the NEXT Gazelle. In Lower, I found a representative of this company Air-Ryde and everything set there. Quickly and efficiently. In St. Petersburg, I often. I called for diagnostics. Little poisoned air from the receiver. Everyone did and did not even take money. This is the service so service. Now where you do not suway - you need to pay everywhere and here .. I put in the bottom, I fixed in St. Petersburg and did not take a penny. Super! Everything works perfectly! Thank you!

Bought in May the lawn Next for the transportation of furniture. The long base took and after the first trips under the load understood that the furniture could stay a bunch of boards after driving through our regional roads. I began to search for forums and in the internet - there is nothing. Upset horror how. The officials on the Dunsky, who bought the car gave tel. Air-ride. I called, I found out that everything is there and you can come at least now, right there. Put everything in 6 hours. Now I am satisfied with as an elephant) I advise everyone to new lawns. The thing is useful and not expensive. But how does it work! Class!

Latest news

Acquisition of a new commercial car usually leads to the need to improve its characteristics. Pneumatic suspension of this category is not tuning, but carries auxiliary functionSaving a spring package from a seed ...

Video set of air suspension with a control system on Fiat Ducato Maxi with a refrigeration unit:

One of the most popular commercial vehicles in Russia-Fiat Ducato Maxi:

This Fiat Ducato with a mileage of 120,000 km came to us on the installation of additional pneumatic suspension with strongly requested rear springs. Ducato Maxi with refrigeration Z anotti S35 and the ability to adjust the temperature inside the ITORMIC Body Plus / minus 18 degrees.

The official load capacity of the largest Fiat Ducato Maxi is only 900 kg. And this value does not take into account the weight of the body superstructure.

Two-year-old FIAT is used daily in urban mode with frequent loading / unloading during the day. The record weight of the cargo was 2 tons for the entire period of use of the data commercial car. In connection with these conditions, employees of the company Pnemoballoni.Ru was advised to establish a two-kinning control system pneumatic suspension With the built-in receiver:

Why do we recommend installing double-circuit management systems with the receiver?

1. The air-circuit air preparation unit eliminates the car roll due to separate nutrition of pneumobalon. Air does not flow from one pneumatic element to another.


2. Receiver - air accumulator. The air in the receiver is under pressure from 6 to 12 atmospheres, depending on the pressure sensor. The receiver makes it possible to "raise" the car even with the full load of the machine. The compressor needs to pump pressure only in the receiver, and not to press the air directly into pneumatic powder. Not every compressor can cope with the oncoming pressure created by the cargo, as a result of which fails in the most responsible moment.

Before installing auxiliary pneumatic suspension, we recommend changing the worn and tired suspension parts for the correct use of any commercial car.

In our practice, there were clients who ship up to 6 tons to such Fiat Ducato Maxi using our rear additional pneumatic suspension and front pneumatic resistantDeveloped specifically for Fiat Ducato with enhanced supporting bears. We strongly recommend not to exceed the passport data of any car, despite the fact that the car becomes more energy-intensive in terms of larger download.

The composition of the axial set of pneumatic suspension for Fiat Ducato:

• 2 metal fastening element


• 2 pneumatic element bellows


• pneumatic Migratory Connection Fittings


• pneumatic highway


• nipple Podkachka


• connection scheme

This set of auxiliary pneumatic suspension is also installed on these cars:

• LDV Maxus.

Installing a similar axial set of pneumatic cylinders takes from 1 hour when using a pneumatic tool.

The pneumatic elements presented are selected after test tests of 30 different pneumators. They differ in their compactness, durability (the gap occurs at 24-25 atm.), Energy intensity and the highest resistance of oils, gasoline and road reagents. When testing the pneummobalids of the larger volume, the ramps of the frame were observed and frequent problem This is what pneumatic feeder is running about the pendant details.

Photo of the left pneumobalone:

Photo of right pneumobalone:

The air preparation unit is recommended to be installed inside the cabin, for high-quality compressor operation and other elements. Due to the use of pneumocopters, you can not be afraid of condensate in the pneumatic system, as when using pneumoculapans, which can close with high humidity.

The air preparation unit is equipped with built-in heating of the distributor, to prevent compressed air freezing after the receiver. We also recommend pouring the easiest dryer with pneumatic systems that pour owners trucks In the brake or system of the pneumatic suspension.

New Air-Ride manufacturing gauges have proven themselves from the best side and are now available in all blocks of air preparation.