It is very important to choose the correct size of tires and wheels for the car, because this parameter affects safety, handling and suspension life. If the diameter of the casting rim is large, then special rubber with a low profile should be put on it. The air volume in it will be less than in a normal one, and the suspension will be very stiff. With a small casting diameter and a high rubber profile, the car will be very soft, but this will have a negative impact on handling. Therefore, you need to find the perfect balance between comfort and handling. Consider these permissible parameters of the Toyota Camry V50, V40 and V 30 tires.

Toyota Camry V50 wheel sizes

The new generation of the Camry V50 business sedan has the same wheel sizes as the previous SV40.

Which one to choose depends on the driver's preference. When choosing, it is worth understanding what you need from the car: comfort or appearance. On the R16, the car will behave very softly, but outwardly it will become unremarkable. This is not the case with the R18. And if you need an intermediate option, then R17 is exactly it.

The bad news for those looking to install an R18: cars with these wheels are only made in America, so it will be more difficult to get them. In terms of affordability, the best option is the R16, because it goes on most Camry trims. R17 are only on the most expensive versions.

Another criterion when choosing is the color: with dark varnish or with transparent. Casting looks much more spectacular with dark varnish, but it is poorly adapted to the climatic conditions in our country: the varnish can crack after a couple of winters.

Toyota Camry V50 tire size

Depending on the cost of casting, rubber is selected. Below is a table with the recommended wheel parameters for the Toyota Camry V50.

Toyota Camry V 40 wheel sizes

The most common type of molding on the Toyota Camry V40 is with a 16-inch diameter, which is found in most trim levels. More expensive trims come with 17-inch trims to enhance the look of the car. However, if your equipment is not so rich, then you can install the R17 without any problems. This is not the case in our country, but R18 is also supplied for American Camri.

If the diameter of the center hole is slightly larger than the hub itself on the Camry 40, you will need to buy special additional rings to the wheel to help fit it. But if the hole diameter is less than the recommended one, then the disc simply will not fit on the hub: the bolts can get into the holes, but they will not be able to clamp them to the end.

If you are looking for molding for a tire, then you should use the rule: its width should be 25-30% less than the width of the rubber profile.

Tire sizes for Toyota Camry V40

For Toyota Camry, the size of its tires must be selected such that it fits into the car regulations. It should be understood that the tire size depends on the casting parameters. Most cars are equipped with 16-inches.

The most optimal rubber size for Toyota Camry is 215/60 R16.

Outwardly, a car with 215/60 tires does not look very interesting due to the small diameter disks, but this option is the most practical. If, after all, the owner wants his car to look more interesting, then instead of 60, you can pick up 215/55 R17. These two sizes come in the original delivery with the car, however, many install 235/45 R18, but for this you need to buy wheels that go to the American versions of this car. This option will look interesting, for which you will have to pay in comfort.

Toyota Camry V30 tire and wheel size

Unlike all subsequent generations of the Camry XV 30, 15-inch products were installed. For those who like to save money, they are the best choice, because they are the cheapest and take good care of the car's suspension. The maximum die size that can stand on the Camry V 30 is already 17 inches, which will affect the rigidity of the car.

Below is a table of permissible wheel sizes for Toyota Camry XV 30

Non-standard discs

If you buy an original casting for a Camry V40, then you should not worry if it will fit a car, because this is already provided by the manufacturer in advance, but when buying casting for a V40 car from other manufacturers, you should pay attention to a number of factors:

1. Bolt pattern on the hub: 5X114.3 - this means that the fixation is done with five bolts, and the bolts themselves form a circle with a size of 114.3 mm.
2. Maximum diameter: R20.
3. The wheel overhang should be between 35 and 45 mm.

Popular tires among Toyota Camry owners

1. Bridgestone Turanza GR-80. It is not cheap rubber, but it makes the car very soft and quiet. It is the best option for a Camry.
2. The Yokohama A539 is ideal in terms of value for money.
3. On Toyota with large engine displacement, owners prefer Michelin Energy tires, which behave excellently when driving aggressively.
4. The Michelin X-ice and Yokohama IG20 are the winter rubber favorites for Camry owners.

Conclusion

The sizes of tires and wheels for Toyota Camry need to be selected only those that comply with the regulations. The choice directly affects comfort and handling. The most optimal disc diameter: R16, and which one to choose specifically for your car is everyone's business, because the regulations provide a choice of three sizes. Each of them can turn the car into a soft, unremarkable, or hard, eye-catching sedan. All Camry generations, except for the V30, have the same wheel parameters, so they can fit from one model to another.

White Camry 40 on huge wheels

Factory casting parameters:
Center hole diameter - DIA: 60.1 mm, fastening to the hub - nut, bolt pattern 5 × 114.3 mm, thread M12 x 1.5

• 16 - 6.5Jx16 ET45
• 17 - 7Jx17 ET45
• 18 - 7.5 × 18 ET45

Let us explain with the help of what these letters and numbers mean. The first number is indicated for better understanding. The first number after the dash (6.5, 7, 7.5) is the width, measured in inches, to convert to centimeters, multiply this figure by 2.54.

J - informs the design properties of the wheel (type of rim of the disc), not important for customers.

x - indicates that the disk is not separate.

16 - fit diameter, corresponds to the diameter of the tire.

ET45 - wheel overhang, in the presented case, is positive and equal to 45mm.

An important parameter is DIA (the diameter of the central hole in the Camry 50 is 60.1 mm), which must correspond to the seat of the wheel hub, is measured in millimeters. If the DIA is larger than the hub, then centering rings are used, which are made by the disc manufacturers.

• 205/65 R16 94S
• 215/60 R17 93V
• 225/45 R18 91V

White XV50 with excellent wheels

Let's tell you what these numbers mean. The first three-digit number before the slash is the tire profile width, measured in millimeters. The two-digit number after the slash is the ratio of the height of the rubber profile to the width, indicated as a percentage. If the profile width is 215 and the profile height is 60, then 215x0.65 \u003d 129 mm tire profile height. The Latin letter R (Radial) says that the tire is of a radial type (the radial type of automobile rubber has supplanted the archaic diagonal type). The two-digit number after the R, provides information about the tire rim diameter (rim diameter) and is measured in inches.

The last two-digit number is the tire load index, i.e. how much load the tire can withstand within the speed index at the correct pressure. For Toyota tires, the load index is 93 and 94, these figures indicate that each can withstand 650 and 670 kg, respectively. The last Latin letter is the speed index, the speed limit within which the use of tires is permissible. In the case of the Camry, the speed index is indicated by letters from S to V. S - 180 km / h, V - 240 km / h.

The pressure in the wheels should be 2.2 - 2.4 bar.

The smallest tires that fit are 205 / 65R16, the maximum tire size is 225 / 40R19.

When choosing tires for a car, ask the seller or look at the tires yourself for the date of manufacture. Buy rubber no older than three years, after this period it may begin to crack and lose its properties.

This is the date of manufacture of tires

V40 rim size

Reach (ET45) - the distance between the vertical axis of the wheel and the plane of the attachment point to the hub. Departure can be positive (most often), zero, and negative.

Large and small wheel diameters have pros and cons. This is because the larger the disc, the thinner the rubber profile. Therefore, choosing "rollers" R18 the car enthusiast gets an excellent appearance and handling, but loses in comfort and suspension service life. By installing small-diameter "sneakers" on the Camry, it gains a smooth ride and running time, and at the same time worsen the spectacular appearance and handling.

Tire dimensions V40

• 215/65 R16 94V
• 215/55 R17 94V
• 205/45 R18 92V

Black beauties

The pressure in the wheels should be 2.1-2.2 bar, measured on cold tires.

The smallest wheels, which are installed on 40 - 215/60 R16, the largest tire size - 225/40 R19.

When choosing wheels for Toyota Camry, be guided by the tasks that you would like to solve. If the main thing is the appearance, showiness of the car and handling, then choose large R19 wheels. But be prepared that ride comfort will decrease, as will the life of the suspension components. If the task is to drive comfortably, softly and take care of the chassis, then the R16 wheels are your choice.

Many car owners buy large wheels and tires for the summer season, while winter tires remain small in diameter.

Camry V30 tire and wheel size

Unlike subsequent generations, R15 wheels were installed. They are perfect for motorists who love a soft, smooth ride and save money, such "rollers" are cheap and save the suspension.

V30 on huge drives

• 15 - 6.5Jx15 ET50
• 16 - 6.5Jx16 ET50
• 17 - 7.5Jx17 ET45

Diameter of the central hole (DIA) - 60.1mm, fastening to the hub - nut, drilling - 5х114.3, allowable overhang (ET) - from 45 to 50 mm.

Good rims for the V30

• 205/65 R15
• 215/60 R16
• 215/55 R17

The minimum size of rubber that is suitable for the "thirty" is 205/65 R15, the largest is 215/55 R17.

Non-factory wheels for Camry

When purchasing original discs for, you should not worry about whether the new "rollers" will fit the car. The manufacturer took into account all sizes and tolerances, it remains only to buy and change the car. If you are thinking about buying third-party discs, then carefully read and write down the following information for yourself.

Original wheel design for Exclusive trim levels

Razboltovka - 5x114.3, i.e. the disc is fixed to the hub with five nuts, and the diameter of the circle passing through the centers of the disc mounting holes is 114.3 mm.

Top rubber for Camry

Continental Conti Premium Contact 5 is a rubber with high acoustic comfort, excellent braking and road holding on dry and wet surfaces. Soft, therefore wears out quickly.

Rubber Continental ContiPremiumContact 5

Nokian Nordman SZ is a choice that responds adequately to temperatures that are low for summer tires without losing grip. They disperse and slow down cars well. The downside is the noise.

Yokohama BluEarth-A AE-50 is the solution when price and reliability are paramount. Good grip on dry and wet asphalt, wear resistant. Noisy, poorly maintained gravel road.

Michelin Energy XM2 is quiet, tough, durable. Excellent performance on asphalt in the rain. It rides poorly on wet gravel and grass.

When choosing winter tires, pay attention to the following models.

Nokian Hakkapeliitta R2 - good non-studded tires that provide decent directional stability, cross-country ability on snowy areas, good braking on ice. Weak deceleration on asphalt.

Goodyear Ultragrip Ice 2 is a non-studded rubber. Pros - confident deceleration on ice, cross-country ability on loose snow. The downside is high noise.

The online store "SHINSERVICE" sells wheels for Toyota Camry and many other cars. Our range includes the most reliable and modern products from reputable manufacturers. We are absolutely confident in the quality of products and provide customers with an extended warranty for all models.

The rim is, in fact, the wheel itself, or rather its base. It accounts for the entire mass of your Toyota Camry or any other car. Needless to say, the choice of this part should be taken very seriously.

It is necessary to select Toyota Camry wheels that match in all respects the car of your configuration. Pay attention to characteristics such as:

• product radius;
• drilling;
• rim width;
• departure.

In addition, you need to decide on the material. The most popular alloy wheels for Toyota Camry. They are inexpensive, strong enough and lightweight, and also have an unusual design that will successfully emphasize the individuality of the car.

The best offer from the company "SHINSERVICE"

Our online store sets low prices for all models presented in the catalog. In addition, you can participate in a special promotion or sale, which makes your purchase even more profitable. Delivery in Moscow and the region is absolutely free. Delivery to any other region of the country is also carried out. Detailed information can be obtained from the specialists of Shinservice LLC.

Lending terms:

• Loan term: 2–36 months
• Credit limit: from 10,000 rubles. up to 300,000 rubles
• Interest rate - determined by the bank based on your data and credit history

How to place an order on credit?

1. Decide on the product and place an order on the website or through a call center operator
2. After placing an order, a bank manager will contact you, advise on the terms of granting a loan and agree with you a meeting to sign an agreement
3. Meet at a convenient time for you with a bank representative and sign the agreement
4. After signing the contract, you need to wait for the bank to pay us your order. Money transfer takes 2 to 3 business days. As soon as the money from the bank arrives, we will send you an SMS with an offer to pick up the order
5. Come to our center with a passport and a loan agreement to receive an order

Loan conditions

• Russian citizenship with permanent registration
• Age from 18 years
• Purchase amount from 10,000 to 300,000 rubles
• Required documents: Russian passport, SNILS