The unit is designed for washing external vertical and horizontal surfaces freight vehicles, buses, trolleybuses and trams.
The unit can be operated in a closed room with an ambient temperature of +1 to +40 ° C.

type of instalation
Installation productivity, aut., Gr. Aut. / Hour	6-20
Number of vertical brushes	4
	125
Current type	3 ~ / 50Hz / 380V
Power consumption, kW	9,7
MPa (kg.s / cm2)	0,3 - 0,7 (3 - 7)
Water consumption for washing one	500
	6-9
	5000 - 5280 - 3710
Installation weight, kg	5330

Semi-automatic washing machine PMU-1 (PSK) with horizontal brush

Stationary washing plant PMU - 1 designed for surface washing of heavy vehicles, buses. The sink consists of four vertical brushes and one horizontal brush. The brushes are mounted in a strong frame made of welded profile pipelines. Vertical brushes provide mechanized side surface cleaning. Horizontal - flushing the front, rear and top of vehicles. The twin brushes rotate in different directions, which makes it possible to wash surfaces in hard-to-reach places. The brush consists of a brush tube and easily replaceable brush elements, 295 mm long and 100 mm wide, fixed to it with screws. The unit is controlled by one operator from the control panel.

Productivity - 6 cars per hour.

type of instalation	Stationary, semi-automatic
Installation performance, bus, group car / hour	6
Number of vertical brushes	4
Number of horizontal brushes	1
Rotation frequency of brushes, rpm	125
Drive unit	gear motor
Pressure in water supply pipelines, MPa (kg.s / cm2)	0,3 - 0,7 (3 - 7)
Total engine power, kW	9,7
Water consumption for washing one gr. car / bus, liters	500
Travel speed of a group car, bus in the process of washing, km / h	4-9
Installation dimensions (W x H x D), mm	3000 - 4800 - 5100

Semi-automatic bus and trolleybus washing plant PMU-A / T-7 (PSK)

The unit is designed for mechanized washing of the outer, vertical surfaces of trolley buses and wagon-type buses.
The unit can be operated in a closed room with an ambient temperature of 1 to 40 ° C.

type of instalation	Stationary, semi-automatic
Installation performance, bus, troll / hour	20-30
Number of vertical brushes	4
Rotation frequency of brushes, rpm	170
Brush drive:	electric motor AIR 90 L 6 1.5 kW: 1000 rpm.
Pressure in water supply pipelines, MPa (kg.s / cm2)	0,3 - 0,7 (3 - 7)
Total engine power, without engine water pump drive, kW	3,0
water pump motor power, kW	4,0
Water consumption for washing one bus, trolleybus, liters	500
Bus / trolleybus travel speed during washing, km / h	4-9
Installation dimensions (W x H x D), mm	4000 - 3500 - 3500
Installation weight, kg	About 1200

Semi-automatic trolleybus washing plant works in conjunction with a conveyor. The conveyor is designed to ensure uniform movement of the trolleybus during the washing process at a speed of 7.6 m / min. Operation of the conveyor is allowed indoors at positive ambient temperatures. The order of work on the conveyor: Starting position - a trolleybus driver enters the washing room and stops the trolleybus in the 1st zone at the level of the first columns washing units (standing left-right) on the front wall of the trolleybus. Disengage the brakes. The trolleybus washer operator turns on the "START" button on the control panel, while the water supply, brushes and conveyor are sequentially switched on. The trolleybus is automatically washed in the 2nd zone. When the push roller sinks into the floor of the conveyor, the automatic trolleybus wash cycle ends - zone 3. The trolleybus moves off the conveyor under its own power into zone 4 to wash inaccessible places.

Gantry car wash (PSK)

Description:

The installation consists of the following parts:

• The contour of preliminary washing of the front, side, rear parts vehicle and bottoms with wheels:
  The circuit consists of 2 vertical struts, 4.5 m high with high-pressure nozzles with fan spray and a lower horizontal installation for washing the bottom and wheels.
  The piping is a single circuit of 20mm pipes with installed nozzles for washing vertical surfaces and the bottom of the vehicle.
  A pressure of 26-30 bar with a total water flow rate of 250 l / min is provided by a 15kW vertical multistage pump of the XVM series manufactured by ESPA.
• The contour for applying the detergent solution to the front, sides and rear of the vehicle. The circuit consists of 2 vertical posts, 4.5 m high with nozzles for applying the cleaning solution. The operation of the circuit is provided by a horizontal pump K20 / 30 4kW.
• The final wash circuit is identical to the pre-wash circuit.
• Control panel for automatic and manual operation.

Location of the contours according to the attached diagram.

The installation kit also includes 2 polyethylene tanks with a capacity of 5m3 for clean water, and 2m3 for a washing solution. Automatic filling of the tanks with water is ensured by float valves.
The pre-flush circuit and the final flush circuit operate from the same pump and tank.
The changeover is carried out automatically by the solenoid valve.

The washing principle is as follows:

The vehicle drives up to the installation, 2m runs into the pedal end, the red light of the traffic light located on the left vertical pillar turns on, the vehicle stops. The pumps are switched on and the pre-wash circuits and the application of the cleaning solution begin to work. After 10-15 seconds, the green light comes on, the vehicle starts moving at a minimum speed through these 2 circuits.
Before reaching 2m to the final wash circuit, the vehicle runs over the pedal end with its wheel, the red light of the traffic light on the left stand of the circuit lights up, the pumps of the first two circuits are turned off, the vehicle stops. After 4 minutes, the green light comes on, the high pressure pump of the final wash circuit is activated, the vehicle starts moving and drives the circuit at minimum speed.

»Tries not only to maintain the highest possible level of services, but also to constantly expand their list. Along with washing passenger cars, interior dry cleaning and cargo car wash "Megapolis M" offers its customers a service related to bus washing. After all, neat and tidy appearance the bus is the face of the carrier company. Among other things, periodic washing of such a large vehicle allows, as long as possible, to maintain good performance of components and assemblies, because a significant amount of dirt accumulates on them, and thanks to timely washing, you can reduce the cost of expensive repairs.

Buses at the stations "Megapolis M" - a fully automated complex of works, during which not only high-level equipment is used, but also a number of the latest technologiesas well as foaming agents. During the washing of buses, not only the body of the vehicle is cleared of contamination, but also cleaning, dry cleaning and washing of the passenger compartment. This means that the passengers of such buses will not have to doubt high quality services provided by the carrier, if they find themselves in a sparkling clean cabin.

At the car washes of the company "Megapolis M", even the most inaccessible parts of the engine and the bottom can be cleaned of all kinds of contamination in the shortest possible time and as efficiently as possible, without fear of any damage paintwork... Due to the fact that the areas of Megapolis M car washes are large enough, you will not have to languish in queues and wait long for the completion of work. will be executed not only very efficiently, but also quickly enough. On average, it takes about 20 minutes to wash a bus. First, a transport foam will be applied to it, which is designed to soften the pollution, then it will be washed off with a high-power water jet, and then a solution of polymer wax will be applied.

Employees of Megapolis M car washes are professionals in their field, so any bus will be washed as efficiently and quickly as possible. If you want your buses to be the perfect reflection of your transport companythen choose Megapolis M car washes, and then your clients will never doubt the high quality of your work. And the employees of "Megapolis M", in turn, will make every effort to make your buses pleasantly surprise and delight your customers with their neat appearance.

archive

Washing of large vehicles and manipulators

Recently, the number of specialized washes for large-capacity trucks has been continuously growing.

Washing of tilt trucks

With the modern development of car wash services, it is not difficult to ensure the cleanliness of a passenger car, but washing tilt trucks, as well as other heavy and large-sized equipment, is still a difficult task.

Tank truck wash procedure

The complexity of the tank cleaning process lies in the fact that the outdated methods of cleaning tanks with hot steam are quite costly and time-consuming ( a large number of water, significant power consumption, several steaming cycles, etc.).

The purpose of this diploma project is to redevelop the site maintenance at JSC "Yubileiny-Agro" of Buda-Koshelevsky district, which will increase the efficiency of using machines ...

Mechanization of the dairy farm of the farm with the modernization of the ADS-24A Sozh dual-mode milking machine

The theme of the diploma project provides for the calculation of technological lines for forage preparation and feeding, milking, as well as the introduction of comprehensive mechanization of a dairy farm of a farm with ...

VKR Project of organization of maintenance with the development of a post of current repair of cars in an agricultural enterprise OJSC Service

Thesis topic: "Project for the organization of vehicle maintenance with the development of a post for maintenance cars in JSC "Service" of the Mokshansk region ...

WQR Organization of RBW of timber trucks of the KamAZ-53229 brand with a volume of timber of 220 thousand cubic meters.

The share of the timber industry complex (LPK) in the industry of the Republic of Karelia in 2017 is 30%. Karelia accounts for over 60% of the all-Russian ...

VKR Organization of RBW of timber trucks of the KamAZ-43118 brand with a volume of harvesting 270 thousand cubic meters.

According to the topic of qualified graduation work, we have designed an enterprise for the maintenance and repair of KamAZ-43118 log trucks in the amount of ...

VKR Project of organization of maintenance and repair of cars at service station IP with the development of a trolley ...

This thesis project was carried out at the level of secondary vocational educational institutions. Analyzing the activities of car service stations r.p. Mokshan, we can say that ...

VKR Project of organization of maintenance and repair of cars in LLC with the development of a lifting trolley

This final qualifying work is devoted to the improvement of TO-2 technology with the development and use of a carriage for service stations. Administrative and economic center "Truzhenik" LLC is located ...

Design of a section for diagnostics and maintenance of trucks MUP Vodokanal

Analysis of the current situation in the MUE KKU "Vodokanal" allows us to draw the following conclusions on improving the organization of maintenance and repair of machines ...

Transportation of people is a very responsible job, the main goal of which is to make passengers as happy as possible with the service provided. As they say, they are greeted by their clothes, and this is as true as possible in the provision of passenger transportation services. Agree if you have a chic, comfortable modern bus with all the conditions for a safe journey, but what will be the reaction of customers if this "liner" is served dirty or dusty? The whole effect will be ruined by a trifling problem. Therefore, high-quality bus washing services in Moscow are quite in demand.

There is no bus that we have not laundered!

Thanks to the available modern specialized washing complex and highly qualified personnel, we will cope with any task. Our craftsmen know all the intricacies of polishing buses of various types and sizes. It should be noted that following the correct sequence of external washing of the bus is a guarantee of its impeccable appearance.

1. The primary treatment with a water jet is carried out in order to remove coarse dirt, particles of road dust, sand, reagents and insects. Indeed, in the future there will be a thorough treatment with special brushes, and if this is not done, then the formation of small scratches on the body cannot be avoided. It is important for the washer to scrupulously check if he has completely removed large dirt particles or not before proceeding to the next operation.
2. Then there is the process of "soaping" or creating a stable layer of special foam on the body of the bus. IMPORTANT! Here it is necessary to use only high-quality and certified auto chemistry, so that the foam removes dirt and does not leave traces of the so-called stains.
3. Then the specialist, using sliding brushes, removes traces of dirt and various chemical smudges that are on the paint-lacquer coating of the bus. The special device of the telescopic brush and the optimally matched bristle stiffness will provide glossy cleanliness in any, even hard-to-reach places.
4. Next, the thick foam layer is washed off using modern non-contact high-pressure washing machines. Without their use, it is impossible to completely wash off auto chemicals from the bus, and the remaining soap solution can harm the paintwork.

At this stage, the washing procedure does not end, but proceeds to the second stage, which is important for the carrier, since the appearance of the bus interior reflects the level of attitude towards passengers. Our specialists carry out the whole range of works in this direction in a short time.

1. They begin wet cleaning from the ceiling, since all the water will drip down and if the floor or chairs have been cleaned, then you will have to repeat this procedure again. In order not to damage the seat upholstery, our masters will put on special protective covers.
2. For travelers, the most interesting activity is looking at what is happening from the bus window and if they get dirty, the pleasure of the trip will be ruined. Therefore, it is important to keep your windows perfectly clean.
3. Next, workers remove the protective covers from the seats and begin to vacuum each of them, moving from the back to the seat. If the coating is made of leather, then they are treated with a special solution that removes the smell.
4. Then they wipe the plastic handles of the chairs, and also wash the floor, completing the full cleaning of the interior.

At the request of the client, we will bring impeccable order in the driver's cab to create comfortable conditions during the trip. An additional salon dry cleaning service is offered. We create an atmosphere of comfort and care in your bus on affordable priceand passengers will certainly appreciate it.

Convenient location in Moscow

The car wash is located two hundred meters from Food City, six hundred meters from the Moscow Ring Road. It is equipped with ample parking spaces and a comfortable waiting area.

We suggest using our new line of equipment and units for high-performance washing of buses / trolley buses and others vehicles with rectangular body contours.

We propose to install equipment that can wash up to 500 pieces of equipment daily. Own production and a team of professional installers allow us to guarantee the prompt implementation of your plans to modernize a critical stage in the technology of commercial passenger transportation. The construction material of the washing system is AISI 304 stainless steel. On the left, you can view videos of the operation of the AVIK BW-01 / TW-01 bus and truck washing system installed at different bus service stations. The station on the lower roller was installed in 2013, the upper one in 2018. (press the button to play). Special offer is valid: Cost of a bus and commercial vehicle wash system "AVIK BW 04/2" - below the price list. Call + 7-926-231-6573!

Same, own production allows us to optimize the basic system in terms of the dimensions of the working brushes, and to create a washing complex that is most suitable for your fleet of buses or minibuses.

Minimum space requirements for the installation of this system:
- 13.0 m long with a through passage,
- 6.0 m wide,
- 6 m height
- power supply 7 kW / 380 V / 3 ph,
- compressed air, 1/2 ", 8-10 bar
- water supply and sewerage according to the project.

The washing procedure looks very simple (see above):
- the driver independently enters the car wash station at the minimum speed
- automation detects the presence of the bus and turns on the supply of shampoo to the arch of application
- continuing to move forward, the bus crosses the next pair of sensors and turns on the brush block
- the program of operation of the brush module is aimed at full coverage of the contour with double pass along the side walls
- the washing process ends by rinsing the bus with clean water from the rinsing arch

The design of the brush module and arches for applying reagents and rinsing are made of stainless steel, control valves and sensors operate on 24 V, minimizing the risk of electric shock to personnel. The control controller allows you to monitor the operating modes of the units and keeps statistics of the complex operation.
The complex operates in a fully automatic mode, leaving the operator only control over the amount of washing shampoo in the barrel.

If there are rear-view mirrors on the front of the bus or trolleybus protruding beyond the dimensions of the body and not folding if necessary, you will have to abandon the possibility of automatic flushing of the front of the body. These are the limitations of travel technology. But there are solutions to this problem - the system can be supplemented with non-contact high pressure modules for flushing the front (and rear, if necessary) part of the vehicle.

As an option to this complex, we can offer the installation of contactless modules for washing wheels, bottom and roof. The addition of non-contact washing units will also raise the issue of water recirculation more acutely. We can help here too - depending on the needs, we have several options for recirculation systems.
If necessary, a system for drying the bus body can be added to the system. This is done sequentially after washing, the body is treated with a drying agent or treated water "Spot Free", after which the bus gets under the arch with high-pressure fans installed, which create an air flow at a speed of more than 200 km / h.

Drying unit with hanging fans Trucks and Buses.

Drying unit commercial transport on a hand wash or on the road from a gantry or tunnel car wash.

Drying unit on domestic fans.
Power: 7.5 kW fans, 380V / 50
Supporting structures made of stainless steel.