* When using spare parts and consumables, the customer and the implementation of single work of less than one norm-hour is the rule "minimum order for work".

Prices for other types of work are calculated according to the standards recommended by the "Mitchell" catalog.

Prices are in rubles.

Attention!

Cars released before the 1997 issue inclusive are serviced only after a predetermined prepayment.

Diagnostic and maintenance work on cars, issued until 1997 output inclusive, is paid at actually spent time.

Warranty Obligations "Vita-Motors"

"Vita Motors" values \u200b\u200bits customers and therefore carries 100% responsibility for all work performed and parts purchased and established in our service. When contacting us on a warranty case, you need to prevent a copy of the order. In case, in the near future it is not possible to come to eliminate the defect, and by the time you visited warranty period It may expire - it is necessary to inform us just immediately when a malfunction is detected to inform us about the problem to fix the moment of treatment, well, of course, depending on the malfunction, try not to exploit the car in order to not aggravate the consequences. For example, it was found to flow oil under the car after the night parking, and the client flies on a business trip or on vacation, well, etc.

Attention! "Vita Motors" does not pay works performed in other services, even if the warranty occurrence occurred far away, it is better for us to pay the evacuation of a faulty car, but be confident that it is our fault. Please consider this issue, unfortunately the cases of fraud on the part of not decent customers.

You changed me something and that, I have broken everything, it was far to you and I repaired there, I ask to return the money and / or pay the repair.

Unfortunately, as the notorious Muller said: it is impossible to believe anyone .... I can (c)

This, naturally, does not apply to our old customers or, provided that the service has fixed the defect for a long time and is well known. The main thing is to remember - all problems are solved. Good luck on the roads!

Send price list to e-mail

Services

from 8000 rubles

aster Vita-Motors will descend, make and mounted any hinged equipment For your SUV:

1. Power bumpers (including under the winch)
2. Power thresholds of any design and attachment
3. Brackets for a spare wheel (including moving structures, locked)
4. Expedition trunk for any burden including With fastening on the power frame of the car.
5. Power arcs, headlight brackets, LED beams, and so on.
6. "Keangsatniki", or how many of them like to call many - "Oloosotniki" (we do not have a kangaroo, and the donkeys are full).
7. Protection of bumpers and thresholds.

And much more, both in your sketches and on the finished catalog of work, depending on the wishes and field of application. It is possible to manufacture replicas of power bumpers and other accessories

famous brands, such as ARB or JAOS.

The term of manufacture on average takes about ten days. Painting ready-made details - to choose from:

1. Powder paint
2. Sustainable coating U-Pol Raptor
3. Sustainable premium coating Line-X.
4. Automotive enamel. Colors any, at your discretion.

The cost of making power supply:

1. Power thresholds (no editing) - from 18000r.
2. Power bumper (without mounting and platform under the winch) - From 30000r.
3. Power bumper (without mounting with a playground under the winch) - From 40000r.
4. Expedition trunk (without installation) - from 12000r.
5. Bracket for a spare wheel (stationary, without installation) - from 8000r.
6. Bracket spare wheel (swivel / folding, without installation) - from 14000r.

On the presented photo, the process of manufacturing a power bumper from a 4-mm steel sheet with a hidden platform for WARN winch, with a LED beam CREE, fogy Farams and power tubular thresholds on Jeep Wrangler JK, as well as power thresholds with platforms on Dodge Ram.

On everything made by the masters "Vita-Motors", equipment, including painting, is given a full-fledged warranty, to install equipment lifelong equipment!

Installation made in the "Vita Motors" of power bodies is carried out taking into account the design of a particular car, due to the use of equipment you will not worry about the power frame of the car - the load on the elements is calculated individually.

Production of power supply for Jeep Wrangler JK

Print

The main focus is the manufacture of both replicas of collaps and individual projects. Fiberglass, Duraflex, composite materials - exists great amount titles. But the essence is one - the products created by the matrix by the use of resin, fiberglass and heaps of various additives. It is the opinion that such products are fragile, short-lived, frost-resistant. NO. It may be so if you order a body kit from China or garage production - where the total savings in all during production goes. All products that we offer are made only with the use of expensive and time-tested components from leading manufacturers. It is not afraid of nor frost, nor high temperatures under the hood. The most important thing is the first color in the chamber at a temperature not higher than 35 degrees - so to speak, for quenching. The main advantage of fiberglass is its maintainability. In case of small damage, or even disorders of geometry with the missing elements - it is easy to restore it. But due to the peculiarities of production, such products will almost always require fitting when installed on a car. From small to global, depending on the quality of the matrix.

ABS plastic or fiberglass - what to choose.

We have already told fiberglass features. Let's now consider an alternative material in production. aerodynamic kites - ABS plastic - Molding method under pressure. Externally and according to the properties, these products are similar to the original plastic. The same elastic, light, not requiring fittings during installation (if not China, again). But in absolutely any cases, such products go an order of magnitude higher in the price, due to the entire production costs. Also, in case of damage, the product is quite difficult to restore, it loses its structure.

It is not rare to us by buyers with a request to implement an individual project of aerodynamics to their car, in other words, to develop and make a body kit, bumper, bumper skirt or other parts for auto tuning in a picture or a picture. Turning to us, the client as a rule represents everything quite superficially and does not suspect that it is behind this development, which titanic amount of work is behind the finished part that I would like to get a person. It would seem, here's a drawing, you are experts, take and do. The customer as a rule suspects that the manufacture of allowing the bumper to the order will be a little longer than already existing in the range, and the most important thing and the erroneous opinion is that the detail "under the order" will cost the same money as the same from our catalog. It's a delusion. Material author website ©

To comprehend the upcoming scope of work on an individual project, it is necessary to have an idea how it is generally the manufacture of parts for tuning, which are already presented in the catalog on the site at least on our example, while we draw your attention to the fact that the production process does not look like without exception Producers of parts for auto tuning. You make an order Suppose the bumper, accepting the salesman manufacturer, takes from the warehouse already the finished matrix, the production language "tool" or along the philistine "form" for the manufacture of the bumper you ordered and it prepares for you the product for the order you made. The key here is that the manufacturer takes the finished form, so the production period of your order usually constitutes an average of the specifications and requirements of the conditioned manufacturing technology within 2-3 days, as well as the cost of this bumper for you is exactly as much as stated on the seller's website for the day of order. This value is calculated by the manufacturer based on the cost of manufacturing the product itself. Ie as we see everything simple, you made an order and how buyers say, supplier "cast" bumper, quickly and "in reasonable money." Material author website ©

Now, based on the read, consider how your individual order will be implemented, Ie, the manufacture of suppose, the bumper on your car you did not find in our catalog. You are consistent with the design and form of the future bumper, then we proceed to work. There are several ways to implement the project, consider averaged. First of all, we need a car similar to the time of model work, if the bumper is simulated, if not for all the time of work, then at least with periodic check-in to us for fitting. We solve this issue on our own and usually find a car for the modeling period is difficult, one of the options to take a car for rental. Next, we acquire with the "disassembly" of the standard bumper used on the basis of which will be performed. Having rented a car and purchasing a regular bumper for work is taken by the "modeling machine" which, with the help of special materials and methods, begins to form, "output" appearance The future bumper meets the drawing provided by you or the snapshot. Only this operation may take at least two times, depending on the complexity of the geometry. By readiness of the model of the bumper for work, the "Matrichnik" is taken, it begins with the model obtained to make the transitional, in other words an intermediate matrix (shape). A few layers of resin are applied, glass salas and glassheelogenery with cutting periods of each layer. The term for this operation takes more than a week. When the transition matrix is \u200b\u200bready in it, the first test product is molded, that is the version of the bumper. This, the primary bumper passes a thorough fit and fit on the car, and the geometry disorders are corrected on it and the geometry violations that were allowed during modeling, all sizes and distances are checked, as well as the mirror of the right and left side of the bumper. This operation may not take bleak of the week. The finally, the final version of the bumper passes the refinement of the surface, which is brought by a polyester putty, the surface as it is said is excreted in zero, all the flaws are eliminated. The term of this operation is 3-7 days. From the finished and final model, it is started to remove the matrix, that is, to prepare the final (finish) form. To the bumper, withstanding all terms and periods of drying each of the layers are applied resin and matrix glass. The layers can be on average from 5 to 15, depending on what service life is planned for a matrix (form). The term of this operation is 1-1.5 weeks. And only then, by the readiness of the matrix, a ready-made bumper is made according to your project, it will be necessary for its manufacture in the area of \u200b\u200b2-3 days. The author of the material site

As you can see, the process of implementing your project, in just one bumper takes no little time, requires serious material investments, it is also a car rental and the purchase of a regular bumper, a huge consumption of materials for modeling, as well as payment of the modeling machine, a matrix, shape. As a result, the period of about two months, and the material costs equal to the approximate value of five ready-made bumpers made with this matrix. Therefore, it is clearly clearly realizing the entire amount of work. You need to decide on the implementation of ideas and ordering one or another detail individually. It is usually less costly and at times faster finding something ready among many proposals from various suppliers, thereby not overpaying and saving your time. Material author website ©

Of course, represented by the concept of modeling your project is outlined from the part surface, affected the main points of the manufacturing process without deepening into technology, but general principles Sure is clear and understandable. At the end, you can consider several previously implemented similar projects.

Production of body parts at a price of 15.000

Need for Speed. Tuning aerodynamic obligation

Tuning car - the process is creative and requires effort. Competent installation of the aerodynamic kit reduces the windshield, fuel costs and increases the stability and controllability of the car. Lack of equipment and experience will spoil the appearance and dynamics of the future supercar. And unprofessional installation will lead to a deterioration in the stability and control of the machine.
Tuning Atelier ARTFG offers the manufacture of aerodynamic kites to order. You can "pump" the car, change the wings, add or replace non-standard details. The right choice of components and fitting the aerodynamic kit helps a comfortable ride at the limiting speeds.

What is the aerodynamic body kit consist of?

Front bumper. The aerodynamic body kit front of the car protects the bottom from the turbulent raid flow. With a bumper, a power body kit is installed, in a collision, it takes the energy of impact on itself.
Spoilers. Profiled planes designed to "press" the machine at speeds from 120 km / hour. Spoilers are installed on the front and tail bumper, the back of the roof and the trunk.

Rear bumper. Wars the air jet from the bottom and prevents the formation of low pressure regions. On the tail bumper put an anti-cycle, in order to improve the travel stability and stabilization of the flow.

Antiques. Surface with profile, reverse wing of the aircraft. Creates a pressure force to compensate for the lifting force of the body. The anti-cycle put on the lid of the trunk behind the roof, if the car with the body of the hatchback or wagon.

DNA panels. Hide the suspension and the bottom of the car from the counter jet of the air flow, reduce the aerodynamic resistance and interfere with the origin of the vortices.

Side thresholds. On the high speed Side bundles remove turbulent vortices from the door of the car. The air ducts are cooled by rear disc brakes.

What materials are used for the production of kites?

The aerodynamic bundles are made of lung materials: fiberglass, polyurethane, plastics and carbon. Consider their advantages and disadvantages.

Fiberglass. Forms based on artificial resins and harden fiberglass. Comparatively inexpensive and pretty durable. Fiberglass kites - a choice that will be affordable and will not be summarized.

ABS plastic. Components from plastic cheap and lung. The basis of delicate and biting increment increases after the expiration of the service life.
Polyurethane. The material allows you to create flawless smooth shapes, without cracks and folds. The lack of polyurethane products is the complexity of molding and restoration.
Crawlestics (carbon). Modern, lightweight and durable material, but quite expensive. Aerodynamic kits
From the carbon is suitable for premium cars and supercars.

Production of aerodynamic kites to order

Production of collaboration on an individual project is a time-consuming procedure. Designing and creating a form takes a few months:
The specificity of a specific model is envisaged; design project is being developed;
At the stage of the layout, lines are paintakingly, the contours of each part are being studied;
technological processes are thoroughly thought out, master forms and matrices are created;
Ready components are subject to coloring and finishing assembly.

Aerodynamic collaborations to order in Moscow

Auto tuning to order will turn your car into a supercar. The price of the manufacture of aerodynamic kit in Moscow depends on the material and dimensions:

1. Small series - fiberglass. Popular and affordable material.
2. Average series - polyurethanes and vacuum molding. Production will require time and money.
3. Large series - plastic injection in metal forms. Kids "for large boys."

Each person wants to express his personality. Someone buys clothes, jewelry or collecting brands, and motorists in every way modernize cars. In such a case, tuning is the most common way to transform the car. Notice the new engine can be a small number of people, but the renewed housing is striking immediately.

Order a bumper or other detail in the store is quite expensive pleasure, so it makes sense to make a body kit on your own hands. Having a minimum set of knowledge you can get a lot of advantages, including:

• Significant savings money compared with custom body kit
• Ability to create a unique body kit for the machine
• Work is done independently, and therefore, with due effort will be performed on conscience
• Gaining actual useful skills

How to make tuning salon tell in this article. About 3D virtual tuning - .

Preparatory stage

Before making a body kit, it is necessary to dismantle the old one. Depending on the car body kit can be attached differently. For example, the "Japanese" they are glued to double-sided adhesion and self-tapping screws. By revealing all the bolts, it is required to remove the scotch residues. There is an option when the pistons are used as an attachment.

With used car, it may be a little more difficult, since the previous owner maybe, too, was an amateur experimenting and secured sealant. In order to get rid of his traces will have to take advantage of the professional polishing of the body.

Regardless of the fastening technology, it is recommended to use a garage with a pamph or jack. After disconnecting parts, in the place where body kit was located, corrosion can be found. Remove it using a grinding device.

Production of kit

In order to understand how to make barking on the car you need to decide from what you will make it. The best material for the price / quality ratio is consideredpolyopolistrol. Before applying it should be carefully smoking the scope of applicationpolystyrene foam.

Having finished the preparatory work, cut it with cubes and stick there, where the new body kit will be collapsed. Sizes of pieces depend on body size. Do not forget to pre-process the surface that will lay down to the machine. Glue pieces withmacroflex . It is necessary to apply it with a thin layer. We advise you to cut Cubianspolystyrene foam with a margin. The design itself is glued in various ways, including:

• High-quality bilateral scotch. Otherwise, body kit on the car will disappear after meeting with puddles
• Sealant, but if you want to remove the kit again it can damage the paint

The result obtained is the foundation. The following action is givingpolystyolistrol desired form. For this stage, you will need an electron, as well as a large skin. When working, it is advisable to pay attention to the following tips:

• Glue the sliced \u200b\u200bblocks only by car
• Your task to give piecespolystyrene foam Body shape machine. It is done to ensure a dense fitting of the material to the car body. Such a solution will reduce the number of cracks and further problems at the following steps.
• It is recommended to lay out blocks as if brick laying occurs. Lay out their block behind the block and scrupulously customize to the required form. Of course, you will spend it somewhere half an hour, but in the future you will realize that time was spent not in vain
• Do not forget about minimal security measures

After work S. expanded polystyrene There is a lot of dirt, so there is a possibility that the material can get into the air duct of the car. Do not forget to spend it.

If you want to make a smooth bumper skirt, dismantle it and put it on the table. Thus, work will move faster and better.

Shaping

Pressing the body shape is carried out by large emery paper of 40 millimeters. Waking it on a stick, you will get an excellent file. Electric knife is good tool To give a coarse contour. Use Socipte to give a rough form. Having reached the limit to the half of the millimeter to the desired result, go to 80-millimeter sandpaper.

Regardless of which part of the body, you do, you need to make a maximum of effort to achieve complete symmetry. Before the transition to the next stage, carefully check that all parts of the body part lightened tightly to the body. This work is the most difficult thing about how to make a body kit with your own hands. Use 40 millimeter empty paper to adjust.

Coating

Cover the resulting body kit with a single layer of epoxy resin with fiberglass, which must be cut into small pieces. First, apply a resin, and after it fiberglass. Clean all body kit. In some places flowing droplets of resin are formed. It is recommended to remove them after frozen resin. At this stage, it will not be superfluous to adhere to several tips:

• Follow the pieces of fiberglass
• For getting normal density, put fiberglass adhesive
• Little pieces of fiberglass easier to glue

The durable layer is achieved by pressing fiberglass moistened in the resin tassel. Cut it from the middle to the edges until the material is completely intided by the resin. Avoid the formation of air bubbles.

After drying, begin to apply a coarse powder layer. The main problems at this stage will apply a smooth layer. This process is necessary to remove all irregularities and flaws. After that, go throughsandpaper to be removed problem places. For getting best result We have to repeat the procedure several times. Small recesses remove putty.

When everything is dry, carefully look at the design. Make sure that the symmetry is observed and feel free to go to the next step how to make a body kit with your own hands. Now you need:

• Remove the resulting element from the bumper
• Out off the original skirts and wipe them well
• Make a skirt contour pattern in contact with fiberglass bumper. Apply multiple layers of fiberglass so that the template is durable
• Carefully drop off the bumper
• Clean the resulting item frompolystyrene foam. Do it gradually, because the layout loses stiffness, so we treat it with fiberglass, and then apply the resin layer
• Disconnect the side skirt templates to get the base for fasteners
• Make a few subsidements on the mounting bar to then connect it to the skirt. Similar feeds are made on the skirt

Fastening details

Take the workpiece made by the template from the factory fastening of the bumper. Attach it to the skirt using fiberglass and resin. As soon as the design freezes, secure the skirt to regular places using the factory bolts.

The likelihood of the fact that the item will smell badly. Cracks and discrepancies can be observed, but this problem is solved.

In this case, the malarious tape and the elastic putty will help you, which should be applied along the line of contact of the skirt and bumper. We are waiting for the pouring of the material. After that dismantle the skirt. It will be clearly visible in the influx. Carefully remove them.

Now you should increase the influx at the bottom of the skirt located on the wheel side. To do this, take a piece of cardboard. Cut the desired pattern and proof by scotch. In order for the cardboard does not lose form strengthen it with twostrapikov . To complete the work on the body kit on the car, several steps remained:

• Apply several layers of fiberglass resin to impart stiffness
• After resin, we proceed the part with a putty and align the surface with a skin
• Most likely, you will have to apply several layers of putty to get a smooth surface.
• Try an element on the machine

When you make the whole front of the work, you need to pay attention to one item. When turning the wheels of the car, the Watch will be viewed the gap in the skirt, so protective corners are required, which are made using elastic putty, cardboard and painting tape by analogy with the rigid edge. Now you know how to make bodies on the car.