The choice of disks for the VAZ 2107 has always been a matter of dispute between car owners. Stamped discs are cheap, durable, unpretentious and available at any car dealership. But it is worth trying to improve the appearance of the car, the first thing you want to do is to install cast or other light-alloy disks on VAZ 2107 .

Therefore, the question of choosing disks is worthy of detailed consideration.

Wheels for VAZ 2107

Wheels, light-alloy (cast, forged, assembled) or stamped, perform the same functions:

• transmission of torque to the tires of the driving wheels;
• ensuring uniform tire compaction around the circumference;
• ensuring the rigidity of the structure and the correct location of the tires in the suspension.

On the "classic" light-alloy and stamped 13-inch wheels are used with four mounting bolts. As tuning, 14-inch wheels can be installed.

Benefits of stamped discs:

The disadvantage of stamped discs is a lot of weight. The greater the unsprung mass, the faster the suspension degrades and the worse the handling on bad roads. In this regard, stamped wheels are much inferior to light-alloy wheels. The second drawback is susceptibility to corrosion, which is why they must be periodically cleaned and tinted.

The advantages of light alloy wheels:

Disadvantages of light alloy disks on VAZ 2107 :

• A brittle material that does not bend, but shatters upon strong impact. If the disc does not split when hit hard, it still does not bend. Therefore, rubber on light-alloy wheels has a much higher chance of damage if it falls into a pit.
• Shorter service life than stamped steel discs.
• High price and attractiveness to thieves.

The high price of alloy wheels makes you take a responsible attitude to their selection.

Types of alloy wheels

According to the production method, light alloy wheels are divided into three types:

• Cast - made by casting from an alloy on an aluminum or magnesium base. The latter option is more expensive. The physical characteristics of alloy wheels differ depending on the alloy used. Accordingly, the price differs. The weight of alloy wheels is one third less than that of steel. They look better, but the high brittleness of the material often causes chips when hitting the edge of a burly pit.

• Forged differs from cast production technology. Hot stamping allows for lighter weight and greater strength than casting. Also, such discs are less fragile, which increases their durability. The impact force for deformation of a forged disc is much greater than for a steel one. Therefore, with strong impacts, more loads are placed on the car's suspension.

• Prefabricated, assembled from spirit-three parts with bolts. Parts of the collecting disc are manufactured using different technologies. For example, the rim is forged, the disc is cast. This approach reduces disk weight and increases maintainability. Assembled discs can be 2-3 times lighter than cast discs. When choosing a collecting disc, you should pay attention to the material of the bolts. They must be titanium. Steel bolts are subject to corrosion, which degrades the appearance and performance of the disc.

Selection of alloy wheels

Wheels on the VAZ 2107 must correspond to the predominant use of the car. Low profile discs are not suitable for driving on bad roads, if you need good handling at high speed, a high profile will not be the best choice.

The main thing is the compliance of the geometric dimensions of the disks with the parameters of the car.

• The nominal size of the VAZ "classic" disk is 13 inches. Alloy wheels can be fitted in 13, 14 and 15 inches. But it should be noted that with a larger disc diameter, a lower tire profile should be used. Otherwise, the wheel will rub or will not fit into the wheel arch at all. Consider. That low-profile tires will be especially easy to damage when hitting a pothole in the asphalt.

• Rims that are too wide (over 30 mm overhang) will provide better grip, but the tire edges constantly protruding from the mudguards will cause severe contamination of the sides of the car. Also, a wide wheel can touch the wheel arch liners.

• The standard VAZ wheels have four holes for mounting bolts. The diameter of the circle on which they are placed is 98 mm. In other words, the distance between a pair of diametrically opposite holes is 98 mm.
• The hole diameter is 12.5 mm. This is an important parameter, since the bolts will dangle in large holes, and will not fit into smaller ones.
• The diameter of the inner hole of the disc corresponds to the diameter of the hub - 58.5 mm. It is with its help, and not with bolts, that the disc is centered. Therefore, discs with a smaller hole will not fit on the machine, with a larger one - they will require the installation of an additional centering ring.

When choosing the optimal size of wheels, you can use the selection service, which is available on many sites of online stores of tires and wheels.

Installation of light alloy wheels on the VAZ 2107

Light-alloy wheels are installed similarly to stamped ones. Difficulties can arise if the diameter or overhang of the disc is very different from the standard. In this case, you will have to change the shape of the wheel arches and fenders so that the wheel does not overwrite when cornering or while driving. Such alterations are very laborious and expensive, so you should think about it before deciding to install disks of non-standard sizes on the VAZ 2107.

Within the framework of this article, we will try to figure out which wheels should be installed on the VAZ 2107. The marking will be disassembled, which indicates what dimensions this or that disc has, this or that tire. Based on the information given here, everyone will be able to independently choose a set of wheels for their "seven".

Factory parameters of "seven" rims

Automobile concern "AvtoVAZ" installs steel wheels on VAZ 2107 cars, which are designed for mounting tubeless tires. Factory disks are labeled 5Jхl3Н2 ЕТ 29. Let's try to figure out what this means.
The number "5" is the width of the disc rim. Measurement unit - inch
The part number "J" is a symbol for the special profile of the disc rim
The number "13" is the rim landing diameter for the tire. The unit of measurement is inch.
The combination "H2" means that there are two annular lugs on the rim of the wheel, which are designed to fit a tubeless tire
The article "ET" is a symbol for the size of the wheel rim overhang
The number "29" is the value of the wheel rim overhang size. Measurement unit - millimeters

Factory parameters of "seven" tires

Leaving the factory, VAZ 2107 cars are equipped with tubeless tires, which are marked 175 / 70R13 82T. Let's now understand what this means.
The figure "175" is the width of the tire section. Measurement unit - millimeters
The number "70" is the ratio of the height of the tire section to the width of the tire section. Unit of measurement - percent
Article "R" is the accepted designation for a radial tire
The number "13" is the diameter of the tire fit. Measurement unit - inch
The figure "82" is the so-called load capacity index, which determines how much weight can press on one such tire. In this case, it is 470 kgf
Article "T" is a symbol of the maximum speed for which the given tire is designed. In this case, it is one hundred and ninety kilometers per hour.

In addition to the standard factory set, the AvtoVAZ automobile concern allows the installation of wheels marked 5 / 2Jхl3, which have a rim overhang in the range of twenty-five to thirty millimeters.
It is worth noting that the recommendations given by the factories by the manufacturer did not appear out of the blue. All data has been checked by engineers in theory and tested in practice. And you can see the different tire tests that have been tested on the network. So, these parameters of rims and tires are ideal for a combination of several factors at once, including the stability of the vehicle on the road, vehicle handling, vehicle cross-country ability and vehicle safety level.
In order to make it more clear, we will give possible scenarios for the development of events if some of the recommended parameters are not observed. So, if the rim overhang on the wheel is greater than the standard one, then it will engage the brakes while driving, which can increase the braking distance. If the rim overhang is less than the recommended value, then this brings the load on the hub bearings beyond the normal range, and this can lead to their unexpected failure, which will entail the unpredictability of the vehicle's trajectory, and this is a direct threat to the life of the driver and his passengers ...
Violations of all other recommendations given by the manufacturer will also not lead to anything good. At best, this will increase the wear of parts of various units, and at worst, it will seriously reduce the already not best level of safety of the VAZ 2107 car.

Wheel functions

Stamped discs

Alloy wheels

7vaz.ru

Wheels are always of great interest. Stamped ones can always be bought at any auto shop. Their reliability and durability have been tested by time. However, one has only to slightly change the appearance of the car, and you no longer want to go back to such models. There is a desire to install alloy wheels for the VAZ 2107. They have a positive effect on fuel consumption, make the trip more comfortable and safe.

Wheel rim functionality

In front-wheel drive cars, the disc is used to transfer revolutions to the drive pair. The tire sits tightly on it. The front suspension is stiffer due to the correct positioning of the tire.

Wheels for a VAZ 2107 car are available in several versions. They differ in certain parameters:

• Width.
• Diameter.
• Mass.
• The number of mounting holes.

It is allowed to install disks in size R13, R14 on any VAZ 2107 car. According to the production method, it can be both stamping and casting.

Newbies always ask the question, which drives are better to put on the seven? You won't be able to answer it in one phrase. Each species has its own advantages and disadvantages.

Stamped

Main advantages:

• Low cost.
• Unpretentiousness.
• Excellent wear resistance.
• Plastic.

Stamping, falling into a hole, does not break or crack, only crumples. You can correct the dent with a regular hammer.

The main disadvantage, perhaps, can be called a large mass. Because of this, the car accelerates for a long time, it has great inertia, and the braking distance increases. All these qualities affect the handling of the car and increase fuel consumption.

If you looked at the stamped wheels on the VAZ 2107 from the point of view of aesthetics, you will notice that they all look the same. Factory coating is usually of poor quality, so the paint quickly begins to fly off and the surface becomes rusty. So that the stamping does not make noise, does not corrode with salt, it must be constantly washed.

Cast

Today, cast products are considered the best disks for the VAZ 2107. They have recently come into vogue and quickly gained a lot of popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts.

Light-alloy wheels are very durable, they almost never rust. Moreover, their appearance has many differences. Designers are engaged in aesthetics of the product, giving it an original look.

If we look at cast models in terms of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• Soft movement,
• Reduced fuel consumption.

With all its advantages, alloy wheels are not devoid of negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. Such parts cannot be repaired.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter. Any impact is transmitted to the suspension, since alloy wheels cannot absorb external influences by their own deformation. Which disks to put on the VAZ 2107, each driver decides on an individual basis, taking into account future operating conditions.

When choosing, it is very important to consider the car model. For example, discs for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption.

Wheel sizes VAZ 2107

Four fastening bolts are used to fasten the products. The holes for them are located in a circle, with a diameter of 98 millimeters. For bolts, holes are drilled with a diameter of 12.5 millimeters.

To make the disc fit freely on the hub, a central hole with a diameter of 58.5 mm is made in it. It is along this hole that its orientation takes place. The bolts only press the flange against it.

When installing an alloy wheel, you may need to use an adapter ring. Sometimes, without this additional detail, it is impossible to create an exact alignment of the hub and the disc surface. The ring can be freely purchased at any car dealership.

Removal, or offset of the disc on the VAZ 2107 is usually 29 millimeters. This term refers to the distance formed between the interface surface of the disc after installation on the hub, with a conditional plane passing through the center of the disc rim.

That is, when the takeaway is positive, it seems that the element has gone deep into the arch. With a negative value, it seems to come out of the arch, it seems that it is too deeply recessed in the seat.

Experts advise to fly within normal limits. If the overhang is too large, the wheel may start touching the wheel arch liners. It is allowed to withstand a deviation of 5 millimeters in any direction. In other words, on a VAZ 2107, the departure can be in the range of +24 - +34 millimeters.

Moreover, this parameter is designed only for a specific disk width. To fit a wider model, you need to sustain a smaller overhang.

Car-Fix - a set for removing car dents. The unique patented shape of the clip eliminates additional damage, and the adhesive can be easily removed after removing the dents.

The Windshield Repair Kit is specially designed for DIY windshield crack repair. A characteristic feature of this glue is its amazingly low viscosity, very close to that of water. Due to this, it easily fills the crack under the action of capillary forces.

kolesadom.ru

The size of tires and rims, or how to understand the marking. Disc size for VAZ 2107

cast, stamped (photo and video)

It is safe to say that rims have always been a stumbling block for many owners. On the one hand, stamped standard disks are quite cheap, unpretentious and durable, the required size of disks is always on sale, both R13 and R14, you can buy even without leaving the regional center.

But if you somehow change the appearance of the car, repaint the body, carry out minimal tuning - and the desire to "put the casting" increases exponentially. In addition to beauty, fuel economy, alloy wheels allow the owner to make a serious argument in favor of choosing the VAZ 2107 and even boast a little to the audience: they say, “I could have bought a foreign car for a long time, but as a patriot, you know, I installed the central locking, casting, and I continue to respect our car industry ".

So, let's talk about the wheels in order.

Wheel functions

• The discs transmit the torque to the tire of the drive pair.
• Discs contribute to uniform tire compaction along its entire circumference, or around the perimeter.
• The disc ensures the correct placement of the tire in the suspension, providing all the rigidity of the structure.

Discs are different, both in width and in diameter, (R 13, R 14, for the classics) by weight, by the number of holes for fasteners.

First of all, according to the production method, discs are stamped and cast. And the first question of a beginner "what disks to install" implies exactly the answer to this question. It is not that simple. Let's figure out why.

Stamped discs

Their advantages are unpretentiousness, low cost, high wear resistance, and plasticity. This means that if it falls into a hole, the disc can be crushed, but cannot be split or broken. And a bent disc can be easily straightened even with a conventional hammer. Stamped discs are so cheap that cars don't wear them at night.

As for the disadvantages, the most important is the large weight, which affects acceleration, braking and inertia. The result is deterioration in handling and greater fuel consumption. In addition, from a purely aesthetic point of view, all cars have one face. Rust can also be a disadvantage, as factory paint is usually short-lived. Also, the stamping should be well washed in spring and autumn to avoid unnecessary noise and salt erosion.

Alloy wheels

Casting is fashionable, cool, modern. In addition, such discs can be 20-30% lighter than stamped ones, because they are made from an alloy of light metals, they are less susceptible to corrosion and are more durable. The low pressure casting technology itself increases the strength of the products.

Externally, alloy wheels have an individual look, there are design bureaus that produce new shapes and follow fashion.

Functionally, the ride on cast disks is smoother, acceleration is improved, and fuel consumption is lower.

But there is also a “flip side of the coin”. The disadvantage of alloy wheels is the continuation of their merits. That is, when it enters the pit, the cast disc does not crumple like a stamped one. But under supercritical load, it simply bursts, splits - and its place is in the alloy processing workshop, or in the garbage can.

The fragility of the disk is to blame. In addition, the casting price is higher and the service life is shorter. An important disadvantage is the transmission of all shocks to the suspension, since the disc is not able to damp them using its own deformation. Therefore, before deciding which wheels to install, decide where and why you will drive the car.

When choosing a wheel, the most important thing should be their compliance with the car model. So, installing discs under a low profile will not suit summer residents, and installing heavy and durable discs will not save on fuel consumption. If you overshot the choice of the size, then the wheel on the bends can "shuffle" the wheel arch liners, or, which is completely offensive, cannot be installed at all.

What quantitative parameters have standard wheels for the classic VAZ 2107?

• Holes for mounting bolts - 4, the diameter of the circle (more precisely, the diameter of the circle on which the holes are located - 98mm. Sometimes it is denoted as (LZ * PCD): 4 * 98. This means that between two diametrically opposite holes 98mm.
• Bolt drilling is characterized not only by the size between the holes, but also by the diameter of the holes themselves. In the case of the VAZ 2107, this is 12.5 mm. Drilling holes is a parameter that is not immediately noticed, as always, first admiring the "size". And in vain. It should be remembered that the manufacturer of the discs is obliged to very accurately calculate the fixation of the wheel to the hub, since the minimum misalignment of the centers of the disc and the hub causes dangerous beats that can eventually tear the wheel off. Drilling must be done with an accuracy of tenths of a millimeter.
• The disc is designed for a hub with a center hole diameter of 58.5 mm. The size of the hub is designated as follows: (DIA 58.5) The fact is that ordinary and solid-looking wheel bolts do not center the wheel to the hub at all, as mentioned above. They just hold the flange and disc tightly together. It is the central hole in the disc that helps to correctly orient the disc, and therefore the wheel relative to the hub. If you decide to purchase discs made of light alloys, then remember that you may need to use an adapter ring for accurate alignment, which are sold quite freely in large stores.
• The diameter of the discs for the VAZ 2107 should be within 13-15 inches, and they are designated as R 13-R The standard size is 13 inches. This dimension refers to the rim diameter of the disc.
• The width of the disc (more precisely, the width of the rim of the disc) in inches for the VAZ 2107 ranges from 5 to 6 inches. Few people pay attention to this parameter, since they primarily look at the diameter. But it is precisely the width that affects the stability of the entire tire, and therefore reliability.

A more complete marking, therefore, looks like 5x13, or 5.5x13.

• The wheel overhang is 15 to 30 mm. Let's talk about this parameter in more detail, since its meaning is not always explained. Strictly speaking, the overhang is the distance between the mating plane on the disc when the disc is placed to the hub and a special, conditional plane that runs along the very middle of the rim on the disc.

Simply put, if the offset is positive, it will seem that the disk is immersed, or "sunk" into the arch.

If the offset is negative, then it will seem that the disc itself is protruding from the wheel arch, and the seat of the disc itself is recessed deep enough.

For all VAZ classics, the standard overhang is +29 mm.

If you do not know which offset to buy, then Lenin's rule "less is better" is perfect here, since if the offset is too large, the wheel can rest against the wheel arch liners, despite the correctly selected radius. The standard deviation is about 5 mm or the other side, so for the VAZ 2107 it will be from +24 to +34 mm. At the same time, it must be remembered that this parameter works only for a certain width of the disc, if you want to put wide discs, then you need a smaller offset and vice versa.

• The bolts for fastening the wheel must be M12 with a diameter of 1.25 mm. Standard drilling is designed for this size.
• If you install a larger R 14 wheel instead of the standard R 13, you will have to install a lower tire profile, such as 55-60 mm, because the tire will have "less space". The next photo can serve as the limit of love for a low profile. Before deciding on such a bold act, you need to understand that leaving the center of a large city is categorically contraindicated for such a car.

In conclusion, I would like to say that a compromise can be winter tires for stamping, and a summer kit for casting, for beauty lovers. And for those who like the benefits - on the contrary, since in winter fuel consumption is higher, and the chance of getting into a hole is less than in summer. In addition, fewer people leave the city in winter, and the roads there are smoother than in summer.

You might be interested in:

What discs to put on a VAZ 2107 in a radius, cast or stamping

Renumax is a unique scratch remover! Don't waste money on repainting! Now you yourself can remove any scratch from the car body in just 5 seconds.

A revolutionary product from the Japanese company Wilsson Silane Guard - an innovative water-repellent coating that gives the car body a shiny shine for up to 1 year.

Wheels are always of great interest. Stamped ones can always be bought at any auto shop. Their reliability and durability have been tested by time. However, one has only to slightly change the appearance of the car, and return back to such

website

Tires and wheels for VAZ 2107, wheel size for Lada 2107

Tires and wheels for VAZ 2107 Other VAZ models: VAZ 110, VAZ 1111, VAZ 1111 Oka, VAZ 2101, VAZ 2102, VAZ 2103, VAZ 2104, VAZ 2105, VAZ 2106, VAZ 2107, VAZ 2108, VAZ 2109, VAZ 21099, VAZ 2110, VAZ 2111, VAZ 2112, VAZ 2113, VAZ 2114, VAZ 2115, VAZ 2120 Nadezhda, VAZ 2121 Niva, VAZ 2123, VAZ 2131 Niva, VAZ 2131 Niva, VAZ 4X4, VAZ Classics, VAZ Granta, VAZ Kalina, VAZ Priora , VAZ Samara, VAZ Vesta, VAZ XRAY, VAZ Largus, PCD 4x98 with a diameter from 13 to 13, width from 5 to 5 and a profile from ET29 to ET29 as in Lada 1200 Tire size from to, width from to and profile from to. Smallest tire size: 165 / 70R13, Largest: Selection of tires and wheels for the car VAZ 2107 Using the automatic selection of tires and wheels for a VAZ 2107 car, you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. The point is that tires and rims have a significant impact on most of the basic performance characteristics of a vehicle. In addition, the importance of tires and rims as active safety elements should be noted. That is why it is extremely important to approach their selection very responsibly, using for this reason enough specific knowledge about these products. Unfortunately, or, on the contrary, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. In this case, a fully automatic selection system is almost the only way to avoid the wrong choice when buying tires and rims. And it is very wide, due to the variety of such products presented in the Mosavtoshin online store.

mosautoshina.ru

The size of tires and wheels, or how to understand the marking | Classic lovers club VAZ-2107, VAZ 2106

SO LET'S CONSIDER TIRES:

Additional indexes:

C - indicates that the tire belongs to the reinforced category M + S - (Mud + Snow - mud plus snow) - winter or all-season tires TL - tubeless tires TT - tube tires

Often the production date is indicated on tires in the format week.year, for example 3006 is the thirtieth week of 2006.

Speed \u200b\u200bIndex Values

Index Speed, km / h I .................. 100K .................. 110L ...... ............ 120M .................. 130N .................. 140P ................... 150Q .................. 160R .......... ........ 170S .................. 180T .................. 190H ... ............... 200V .................. 210VR ............... ... 210 - 240ZR .................. more than 240

Load index values

Index Load, kg Index Load, kg 60 ........ 250 ............. 90 ........ 60061 ........ 257. ............ 91 ........ 61562 ........ 265 ............. 92 ..... ... 63063 ........ 272 \u200b\u200b............. 93 ........ 65064 ........ 280 ..... ........ 94 ........ 67065 ........ 290 ............. 95 ........ 69066 ........ 300 ............. 96 ........ 71067 ........ 307 ......... .... 97 ........ 73068 ........ 315 ............. 98 ........ 75069 .... .... 325 ............. 99 ........ 77570 ........ 335 ............. 100 ....... 80071 ........ 345 ............. 101 ....... 82572 ........ 355. ............ 102 ....... 85073 ........ 365 ............. 103 ...... .87574 ........ 375 ............. 104 ....... 90075 ........ 387 ........ ..... 105 ....... 92576 ........ 400 ............. 106 ....... 95077 ..... ... 412 ............. 107 ....... 97578 ........ 425 ............. 108. ...... 100079 ........ 437 ............. 109 ....... 103080 ........ 450 ... .......... 110 ....... 106081 ........ 462 ............. 111 ....... 109082 ........ 475 ............. 112 ....... 112083 .. ...... 487 ............. 113 ....... 115084 ........ 500 ............ . 114 ....... 118085 ........ 515 ............. 115 ....... 121586 ........ 530 ............. 116 ....... 125087 ........ 545 ............. 117 ..... ..128588 ........ 560 ............. 118 ....... 132089 ........ 580 ....... ...... 119 ....... 1360

Example: 5.5J * 13 ET38 4x98 D58.6

5.5 - disc width, indicated in inches 13 - disc diameter, indicated in inches ET - offset, i.e. distance from the central axis of symmetry of the disc to the plane of contact of the disc to the hub (mm) 4 - number of mounting holes number of bolts (PCD) on which the disc is attached (pcs) 98 - bore diameter of fastening bolts (mm) D58.6 - diameter of the central hole of the disc (mm)

Humpers are annular protrusions along the rim of a tubeless rim. The main purpose of the humps is to securely fix the tire bead in turns to prevent the wheel from depressurizing. Humping can be regular (denoted by "H") and truncated (denoted by "X"). If there are no humps on the rim, the installation of tubeless rubber is not recommended and can be life-threatening.

www.semerkainfo.ru

Wheels for VAZ 2107, selection and installation of light-alloy wheels (Video)

The choice of disks for the VAZ 2107 has always been a matter of dispute between car owners. Stamped discs are cheap, durable, unpretentious and available at any car dealership. But it is worth trying to improve the appearance of the car, the first thing you want to do is to install cast or other alloy wheels on the VAZ 2107.

Therefore, the question of choosing disks is worthy of detailed consideration.

Wheels for VAZ 2107

Wheels, light-alloy (cast, forged, assembled) or stamped, perform the same functions:

• transmission of torque to the tires of the driving wheels;
• ensuring uniform tire compaction around the circumference;
• ensuring the rigidity of the structure and the correct location of the tires in the suspension.

On the "classic" light-alloy and stamped 13-inch wheels are used with four mounting bolts. As tuning, 14-inch wheels can be installed.

Benefits of stamped discs:

The disadvantage of stamped discs is a lot of weight. The greater the unsprung mass, the faster the suspension degrades and the worse the handling on bad roads. In this regard, stamped wheels are much inferior to light-alloy wheels. The second drawback is susceptibility to corrosion, which is why they must be periodically cleaned and tinted.

The advantages of light alloy wheels:

Disadvantages of alloy wheels on the VAZ 2107:

• A brittle material that does not bend, but shatters upon strong impact. If the disc does not split when hit hard, it still does not bend. Therefore, rubber on light-alloy wheels has a much higher chance of damage if it falls into a pit.
• Shorter service life than stamped steel discs.
• High price and attractiveness to thieves.

The high price of alloy wheels makes you take a responsible attitude to their selection.

Types of alloy wheels

According to the production method, light alloy wheels are divided into three types:

• Cast - made by casting from an alloy on an aluminum or magnesium base. The latter option is more expensive. The physical characteristics of alloy wheels differ depending on the alloy used. Accordingly, the price differs. The weight of alloy wheels is one third less than that of steel. They look better, but the high brittleness of the material often causes chips when hitting the edge of a burly pit.

• Forged differs from cast production technology. Hot stamping allows for lighter weight and greater strength than casting. Also, such discs are less fragile, which increases their durability. The impact force for deformation of a forged disc is much greater than for a steel one. Therefore, with strong impacts, more loads are placed on the car's suspension.

• Prefabricated, assembled from spirit-three parts with bolts. Parts of the collecting disc are manufactured using different technologies. For example, the rim is forged, the disc is cast. This approach reduces disk weight and increases maintainability. Assembled discs can be 2-3 times lighter than cast discs. When choosing a collecting disc, you should pay attention to the material of the bolts. They must be titanium. Steel bolts are subject to corrosion, which degrades the appearance and performance of the disc.

Selection of alloy wheels

Wheels on the VAZ 2107 must correspond to the predominant use of the car. Low profile discs are not suitable for driving on bad roads, if you need good handling at high speed, a high profile will not be the best choice.

The main thing is the compliance of the geometric dimensions of the disks with the parameters of the car.

• The nominal size of the VAZ "classic" disk is 13 inches. Alloy wheels can be fitted in 13, 14 and 15 inches. But it should be noted that with a larger disc diameter, a lower tire profile should be used. Otherwise, the wheel will rub or will not fit into the wheel arch at all. Consider. That low-profile tires will be especially easy to damage when hitting a pothole in the asphalt.

• Rims that are too wide (over 30 mm overhang) will provide better grip, but the tire edges constantly protruding from the mudguards will cause severe contamination of the sides of the car. Also, a wide wheel can touch the wheel arch liners.

• The standard VAZ wheels have four holes for mounting bolts. The diameter of the circle on which they are placed is 98 mm. In other words, the distance between a pair of diametrically opposite holes is 98 mm.
• The hole diameter is 12.5 mm. This is an important parameter, since the bolts will dangle in large holes, and will not fit into smaller ones.
• The diameter of the inner hole of the disc corresponds to the diameter of the hub - 58.5 mm. It is with its help, and not with bolts, that the disc is centered. Therefore, discs with a smaller hole will not fit on the machine, with a larger one - they will require the installation of an additional centering ring.

When choosing the optimal size of wheels, you can use the selection service, which is available on many sites of online stores of tires and wheels.

Installation of light alloy wheels on the VAZ 2107

Light-alloy wheels are installed similarly to stamped ones. Difficulties can arise if the diameter or overhang of the disc is very different from the standard. In this case, you will have to change the shape of the wheel arches and fenders so that the wheel does not overwrite when cornering or while driving. Such alterations are very laborious and expensive, so you should think about it before deciding to install disks of non-standard sizes on the VAZ 2107.

semerkavaz.ru

Sizes of wheels, tires and disks VAZ 2107 2002

Highlighted entries mean factory sizes, the rest are replacement options

VAZ 2107 2002 1.5i

VAZ 2107 2002 1.5i

Generation: 1982 .. 2012 Power: 67 hp | 50.0 kW | 68 PS Engine: I4 petrol Center hole diameter: 60.5 mm Thread: M12 x 1.25 Mounting type: bolt Year of production: 2002-2006

VAZ 2107 2002 1.6

Generation: 1982 .. 2012 Power: 74 hp | 55.2 kW | 75 PS Engine: I4 petrol Center hole diameter: 60.5 mm Thread: M12 x 1.25 Mounting type: bolt Years of production: 1982-2006

VAZ 2107 2002 1.6i

Generation: 1982 .. 2012 Power: 73 hp | 54.4 kW | 74 PS Engine: I4 petrol Center hole diameter: 60.5 mm Thread: M12 x 1.25 Mounting type: bolt Year of production: 2002–2012

VAZ 2107 2002 1.7i

Generation: 1982 .. 2012 Power: 79 hp | 58.8 kW | 80 PS Engine: I4 petrol Center hole diameter: 60.5 mm Thread: M12 x 1.25 Mounting type: bolt Years of production: 1991-2003

Wheels are always of great interest. Stamped ones can always be bought at any auto shop. Their reliability and durability have been tested by time. However, one has only to slightly change the appearance of the car, and you no longer want to go back to such models. There is a desire to install alloy wheels for the VAZ 2107. They have a positive effect on fuel consumption, make the trip more comfortable and safe.

Wheel rim functionality

In front-wheel drive cars, the disc is used to transfer revolutions to the drive pair. The tire sits tightly on it. The front suspension is stiffer due to the correct positioning of the tire.

Wheels for a VAZ 2107 car are available in several versions. They differ in certain parameters:

• Width.
• Diameter.
• Mass.
• The number of mounting holes.

It is allowed to install disks in size R13, R14 on any VAZ 2107 car. According to the production method, it can be both stamping and casting.

Newbies always ask the question, which drives are better to put on the seven? You won't be able to answer it in one phrase. Each species has its own advantages and disadvantages.

Stamped

Main advantages:

• Low cost.
• Unpretentiousness.
• Excellent wear resistance.
• Plastic.

Stamping, falling into a hole, does not break or crack, only crumples. You can correct the dent with a regular hammer.

The main disadvantage, perhaps, can be called a large mass. Because of this, the car accelerates for a long time, it has great inertia, and the braking distance increases. All these qualities affect the handling of the car and increase fuel consumption.

If you looked at the stamped wheels on the VAZ 2107 from the point of view of aesthetics, you will notice that they all look the same.

Factory coating is usually of poor quality, so the paint quickly begins to fly off and the surface becomes rusty. So that the stamping does not make noise, does not corrode with salt, it must be constantly washed.

Cast

Today, cast products are considered the best disks for the VAZ 2107. They have recently come into vogue and quickly gained a lot of popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts.

Light-alloy wheels are very durable, they almost never rust. Moreover, their appearance has many differences. Designers are engaged in aesthetics of the product, giving it an original look.

If we look at cast models in terms of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• Soft movement,
• Reduced fuel consumption.

With all its advantages, alloy wheels are not devoid of negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. Such parts cannot be repaired.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter.

Any impact is transmitted to the suspension, since alloy wheels cannot absorb external influences by their own deformation. Which disks to put on the VAZ 2107, each driver decides on an individual basis, taking into account future operating conditions.

When choosing, it is very important to consider the car model. For example, discs for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption.

Wheel sizes VAZ 2107

Four fastening bolts are used to fasten the products. The holes for them are located in a circle, with a diameter of 98 millimeters. For bolts, holes are drilled with a diameter of 12.5 millimeters.

To make the disc fit freely on the hub, a central hole with a diameter of 58.5 mm is made in it. It is along this hole that its orientation takes place. The bolts only press the flange against it.

When installing an alloy wheel, you may need to use an adapter ring. Sometimes, without this additional detail, it is impossible to create an exact alignment of the hub and the disc surface. The ring can be freely purchased at any car dealership.

Removal, or offset of the disc on the VAZ 2107 is usually 29 millimeters. This term refers to the distance formed between the interface surface of the disc after installation on the hub, with a conditional plane passing through the center of the disc rim.

That is, when the takeaway is positive, it seems that the element has gone deep into the arch. With a negative value, it seems to come out of the arch, it seems that it is too deeply recessed in the seat.

Experts advise to fly within normal limits. If the overhang is too large, the wheel may start touching the wheel arch liners. It is allowed to withstand a deviation of 5 millimeters in any direction. In other words, on a VAZ 2107, the departure can be in the range of +24 - +34 millimeters.

Moreover, this parameter is designed only for a specific disk width. To fit a wider model, you need to sustain a smaller overhang.

Using automatic selection of tires and wheels for the car VAZ 2107, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. This is due to the significant role that they play in ensuring a range of performance characteristics of any modern vehicle. In addition, tires and rims in a modern car are one of the active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes a whole range of knowledge about these products.

Unfortunately, most car owners prefer not to get into such technical nuances. Regardless of this, the automatic selection system will be extremely useful, that is, it allows you to minimize the likelihood of making the wrong decision when choosing certain tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.