Hyundai Getz ground clearance or clearancelike for any other passenger car is an important factor on our roads. It is the condition of the road surface or its complete absence that makes Russian motorists interested in the clearance of Hyundai Getz and the possibility of increasing ground clearance using spacers.

To begin with, it's worth honestly saying that real clearance Hyundai Getz may seriously differ from that declared by the manufacturer. The whole secret is in the method of measurement and the location of the ride height measurement. Therefore, you can find out the real state of affairs only by yourself armed with a tape measure or a ruler. Official clearance Hyundai Getz is only 135 mm... The situation is saved only by the compact size of the car itself and small overhangs in the front and rear.

Some manufacturers go for the trick and declare the size of the ground clearance in an "empty" car, but in real life we \u200b\u200bhave a full trunk of all sorts of things, passengers and the driver. That is, in a loaded car, the clearance will be completely different. Another factor that few people have in mind is the age of the car and the wear and tear of the springs, their “subsidence” from old age. The issue is resolved by installing new springs or buying spacers under sagging springs Hyundai Getz... The spacers allow you to compensate for the spring settling and add a couple of centimeters of ground clearance. Sometimes even a centimeter in the parking lot at the curb plays an important role.

But do not get carried away with the "lift" of the Hyundai Getz's ground clearance, because the spacers to increase the clearance are focused only on springs. If you do not pay attention to the shock absorbers, the travel of which is often very limited, then self-modernization of the suspension can lead to loss of control and damage to the shock absorbers. In terms of cross-country ability, high ground clearance in our harsh conditions is good, but at high speeds on the track and in corners, there is a serious buildup and additional body roll.

To increase ground clearance on Hyundai Getz, spacers for springs (or elongated springs) are used, and the so-called "houses" or "heels" are used to compensate for the length of the shock absorber rod. This metal spacer allows the rear shock to be raised slightly higher. What a homemade spacer for Hyundai Getz looks like can be seen in the following photo.

There is even a video.

The result is a pretty decent ground clearance. See the result of the suspension lift below in the photo.

Any car manufacturer, when designing a suspension and choosing a clearance value, is looking for a middle ground between handling and cross-country ability. Perhaps the easiest, safest and most unpretentious way to increase clearance is to install wheels with “high” tires. Changing wheels makes it easy to increase the ground clearance by another centimeter. Do not forget that a major change in ground clearance can damage Hyundai Getz CV joints. After all, "grenades" will have to work from a slightly different angle. But this only applies to the front axle. At the back, attention should be paid to the length of the brake hoses.

Hyundai Getz is a budget car of a subcompact class, produced from 2002 to 2011 by the South Korean motor transport company Hyundai Motor Company. This is a fairly inexpensive car with good technical characteristics. According to most motorists, the lightweight, economical and safe Hyundai Getz has proven itself only on the positive side.

Its only drawback is the significantly low ground clearance. According to the technical specifications, its clearance is 135 mm, and with the crankcase protection this distance becomes even less (by 20 mm). On numerous forums, people write reviews that such a low clearance of the Hyundai Getz makes it difficult to move on broken asphalt with deep holes and on country roads.

It is especially difficult for the owners of this vehicle in winter, when there is a lot of high ice on the roads and snow. Very often, Hyundai Getz owners resort to increasing the distance between the road surface and the bottom of the car (lifting). The only exception is the limited edition Hyundai Getz Cross with higher ground clearance. To understand the ways of increasing, first you need to understand what clearance is and what it affects.

Vehicle ground clearance distance

Vehicle clearance is a fairly significant technical characteristic that is important to pay attention to when choosing a car brand. Ground clearance is the distance between the road surface and the center of the vehicle, its lowest point. This distance under the bumper and oil pan can be the same. As a rule, in the technical specifications, the clearance is indicated in millimeters and varies for the following types of vehicles:

1. Ground clearance under bumper:

• a passenger car - from 140 to 200 mm;
• crossover (SUV) - from 180 to 250 mm;
• sUV - from 200 to 350 mm.

1. Ground clearance under the oil pan:

• a passenger car - from 120 to 170 mm;
• crossover (SUV) - from 170 to 210 mm;
• sUV - from 200 mm and more.

The ground clearance directly affects the passability of the machine and can be adjusted in almost every one. But in any case, if there is a need to increase or decrease it in Hyundai, it is better to contact experienced specialists. This is due to the fact that its incorrect increase can significantly reduce the resource of wheel drives. Also, such a change in the distance of the ground clearance increases the risk of problems with the handling of the machine, reducing its stability. In addition, you must always keep in mind that a reduced clearance distance is recommended for fans of fast driving.

Increase clearance Hyundai Getz

First, you need to pay attention to the description of the increase in the distance between the road and the bottom of the car from the manufacturer, where they usually indicate what actions can be used to increase the ground clearance of the Hyundai Getz. One of the most common ways of such an increase in the Hyundai Getz is to replace the wheels. To do this, you need to pick up discs with a larger radius and the corresponding tires. This method is considered the simplest and least effective.

It is better to replace wheels if there are direct recommendations from the manufacturer. Changing the chassis of Hyundai Getz can also help. To do this, place plastic, aluminum or polyurethane spacers between the turns of the shock absorber. The ground clearance can be increased by changing the distance between the vehicle supports and the body itself. Thus, the lumen segment can be increased up to an average of 30 mm.

Of all these methods, wheel replacement gives only the smallest result. You can try to make a Hyundai Getz facelift, the main thing is to achieve the maximum result and do it in a car repair shop. This is precisely so that experienced specialists can, after lifting, check and carry out the necessary adjustment of the machine for road safety.

The consequences of a change in vehicle clearance

It must be remembered that lifting a car can lead to bad consequences; it is better not to purchase a car with a low ground clearance without good reason. For example, when replacing wheels, it is important to pay attention to the arches so that they do not touch the body later. When installing spacers in the coils of the Hyundai Getz shock absorber, the ground clearance will increase, but problems such as a decrease in its working stroke, an increase in the rigidity of the suspensions may arise.

Increasing the distance between the supports and the body can significantly affect the vehicle's handling. When deciding to increase the size of the ground clearance, it is extremely important to weigh all the risks associated with the further movement of the vehicle on the roads. All manipulations in this area, especially in the absence of recommendations from the manufacturer, can reduce the overall safety of the car.

In particular, such changes can shift the center of mass of the vehicle and cause problems in the braking system, which is quite dangerous. The owner of this car needs to keep in mind that increasing the distance between the road and the bottom of the car can be safe only up to 15 mm and not only in the case of Hyundai Getz, but also in every car.

The Hyundai Getz's ground clearance is the distance between the road and the lowest part of the car. To be more precise, the clearance is considered, according to the factory standards, from the threshold of the vehicle to the road. Ground clearance directly affects the vehicle's aerodynamics as well as streamlining.

Clearance

The Hyundai Getz's ground clearance is 135 mm. But be careful when leaving on vacation or returning with purchases: a loaded car will easily lose 2-3 centimeters of ground clearance.

If desired, the clearance of any car can be increased using spacers for shock absorbers. The car will get higher. However, it will lose its former stability at high speeds and will lose a lot in maneuverability. The clearance can be reduced, for this, as a rule, it is enough to replace the standard shock absorbers with tuning ones: the handling and stability will please you immediately.

Ground clearance Hyundai Getz restyling 2005, hatchback, 1st generation

2002 Hyundai Getz clearance, hatchback, 1st generation

Methods for increasing ground clearance

Since the road surface on the territory of the CIS countries, basically, leaves much to be desired, pits and bumps, many Getz owners are trying to increase the clearance height in order to avoid damage to the protective elements of the body, such as bumpers and door sills. This can be done in several ways. The most common is the installation of spacers or springs with shock absorbers. Let's consider both options.

Spacers

Spacers are rubber-metal plates that are inserted between the body and the shock absorber to increase the vehicle's ride height. These refinement parts can be found in Goetz's auto markets or auto dealerships. Since the cost is much lower than shock absorbers and springs, spacers are preferred by most motorists.

Consider the sequence of work to install the spacers:

1. We carry out dismantling of the shock absorber strut along with all components.
2. Dismantle the metal cover that fixes the spring.
3. Install the spacer so that it is between the two metal plates.
4. We mount the mounting bolts, with which the stand will then be fixed to the glass.
5. We install the stand on a standard seat.

Thus, you can increase the ground clearance on the Hyundai Getz by 10-15 mm.

Shock absorbers and springs

Another way to increase ground clearance on the Getz is by installing tall shock absorbers and springs. To do this, you will need to find a set of non-standard chassis to increase ground clearance. Usually, motorists go to tuning stores or the car market to buy these types of spare parts.

Installation is done by hand. Old parts are dismantled from the car, and new ones are easily installed in the old seat. So, there is no need to alter or customize anything. The only caveat is that there may be large fastening bolts that need to be cut after installation on the car.

Conclusion

The Hyundai Getz clearance for all body types is one and is 135 mm, according to the technical documentation provided by the manufacturer. So, in order to increase the ground clearance, motorists use different methods. The most common is the installation of spacers.

• Goats ass on bumps and waves on the track, afraid of rut with a regular size. Consumption is not a runabout. Clearance too small for snowdrifts, especially when installing protection.
• Small clearance, you can't jump in winter Very wide struts in front, poor visibility when cornering
• Small clearance, no headlight range control, the rear wiper does not turn off automatically.
• Clearance
• small clearance.
• Smallish clearance, is solved by setting 15 wheel radius. Crickets in the cabin in cold weather Electrician 4-. Typical malfunctions: the speedometer is buggy, the heating of the driver's seat may fail (treated).
• Low clearance.
• low clearance.
• Clearance, bad low beam.
• Low clearance.
• Small clearancelightweight when driving on the track
• consumption, clearance
• the timing belt does not care for the claimed 60 thousand km, maximum 50 ... premature replacement of the timing belt costs about 5-7 thousand rubles, after a break, the repair rises about 20 thousand rubles Weak steering rack ... Small clearance almost any ride on a rut leads to the fact that the protection presses the engine mount and vibration appears. Consumption 10-12 liters ... in a city with a condender
• Low clearance
• low clearance, high fuel consumption
• Rigid suspension Small clearance
• clearance smallish.
• Small clearance
• Low clearance, low-power
• Small clearance.
• poor interior ventilation, low clearance
• small clearance
• Weak suspension, small clearance... No air conditioner
• small clearance.
• Small clearance... thin metal case.
• Low clearance and the engine on the machine with the included condenser barely pulls
• Clearance too small, native speakers are lousy.
• small clearance.
• Small trunk, low clearance.
• Not high clearance, relatively high consumption for such a car, weak paintwork.
• Behind, there is either a shelf, or something in the trunk lid ... in general, something is clanging from behind. Low clearance, especially if a crankcase guard is installed.