Hyundai Accent is one of the most popular vehicles in the world. The model continues to be a bestseller on the Russian market for many years. The 5-door front-wheel drive car is class "B" (small medium). Hyundai Accent is available in hatchback and sedan bodies.

The main competitors of the model in the domestic market are Volkswagen Polo, Renault Logan, Lada Vesta and Kio Rio. The undoubted advantage of the Korean product is the affordable service and low cost. Even original car parts are relatively inexpensive. Also worth noting is the economy and corrosion resistance. According to these parameters, the model is superior to its competitors.

Hyundai Accent is the first independent development of the Korean brand. The product was launched in 1995. The initial generation was done in the "biodesign" style. Accent became the first Hyundai car to receive its own unit (previously the manufacturer used Mitsubishi engines).

The car has become one of the most successful "brainchilds" of the Korean brand. The exterior of the Hyundai Accent I turned out to be very unusual and stylish. The model received a streamlined body with many smooth lines. A rather large bumper and a small radiator grill appeared in front. The company nameplate was placed on the hood. The front design is complemented by narrow headlights. At the back, the model was completely inconspicuous.

Inside, everything was as simple and budgetary as possible. The Koreans saved on finishing materials, but made a very attractive interior. In terms of the quality of materials and assembly, Hyundai Accent I significantly surpassed domestic products.

The technical characteristics of the model were also attracted, among which the ease of control and good engine performance stood out.

Wheel and rubber sizes

Hyundai Accent I arrived in Russia only in 1999. The car was available with different transmissions ("mechanics" or "automatic") and engines:

1.3-liter engine (60 HP):

• wheels 4.5J by 13 ET46 (4.5 - width in inches, 13 - diameter in inches, 46 - positive offset in mm), tires - 155 / 80R13 (155 - tire width in mm, 80 - section height in%, 13 - rim diameter in inches);
• wheels 5J for 14 ET40, tires - 175 / 65R14.

2. 1.5-liter unit (92 hp):

• wheels 4.5J for 13 ET46, tires - 155 / 80R13;
• wheels 5J for 13 ET42, tires - 175 / 70R13;
• wheels 5J for 14 ET40, tires - 175 / 65R14;
• wheels 6J for 14 ET38, tires - 195 / 50R14.

Drilling and tire pressure

The rest of the wheel characteristics of the modifications were similar:

• PCD (drilling) - 4 by 114.3 (4 - the number of holes, 114.3 - the diameter of the circle on which they are located in mm);
• fasteners - M12 by 1.5 (12 - stud diameter in mm, 1.5 - thread size);
• center hole diameter - 67.1 mm;
• tire pressure - 2.1 bar.

Generation 2

In 1999, the premiere of the second generation Hyundai Accent took place. The new model has noticeably grown in size (in width and length by 130 mm). The body design was made in accordance with the latest developments of the Korean brand. At the front, a large slope of the windshield and a low sloping hood stood out, due to which it was possible to reduce the coefficient of drag. The front end has been almost completely redesigned. The grille has become larger and received a lattice structure. The nameplate migrated to her from the hood. The headlights were made angular and placed closer to the sides. Hyundai Accent II turned out to be more classic and lost its former lightness.

Significant changes have taken place inside too. The Korean manufacturer has completely revised the front panel and finishing materials. The interior has become more comfortable and functional, and the driver's seat has received greater visibility. The one-piece design of the instrument panel provides good ergonomics. Each element was placed as thoughtfully as possible, and clear backlighting made for excellent readability in the field of view. The noise isolation level in the model has been increased.

Hyundai Accent II tested a unique system that prevents fuel that has heated up in the engine area from getting back into the tank. This decision has increased the efficiency and environmental friendliness of the car. All body types of the model had a rigid suspension with 2 anti-roll bars.

Hyundai Accent II was offered with a variety of power plants (in addition to gasoline, diesel options also appeared). However, on the Russian market, only 1.5-liter (102 hp) modifications with "mechanics" or "automatic" were available.

Wheel and tire specifications:

• wheels 5J for 13 ET46, tires - 155 / 80R13;
• wheels 5J for 13 ET46, tires - 175 / 70R13;
• wheels 5J for 14 ET46, tires - 175 / 65R14;
• wheels 6J for 14 ET46, tires - 185 / 60R14;
• wheels 6J for 15 ET38, tires - 195 / 50R15.

Some other wheel characteristics have also changed:

• PCD (drill hole) - 4 to 100;
• fasteners - M12 by 1.5;
• central hole diameter - 54.1 mm;
• tire pressure - 2.1 bar.

Since 2001, the production of the model began at the Taganrog Automobile Plant in Russia. Due to the localization of production, the cost of the car was reduced by 15-20%.

Generation 3 (Hyundai Verna)

The third generation Hyundai Accent was presented in 2006 in Detroit. The model received a completely new interior, body and a line of power units. The update was not very successful. So, in the Russian market, Hyundai Accent III has not found its buyer. The production of the model was completed already in 2010. It is noteworthy that the Korean auto maker did not stop the release of the second generation, selling two generations of the car at once.

External changes have affected the front of the car. The model received a new radiator grille, reminiscent of a similar element in individual Toyota products, a redesigned bumper and new head optics (LED headlights were optionally installed). The third Hyundai Accent has become more streamlined and sporty. The sedan's stern has also changed somewhat, becoming more massive.

There were more transformations in the interior. Among the external changes should be noted the new instrument lighting. In addition, the salon received new features and finishing materials. The steering column was adjustable both in height and in reach.

On the technical side, the Hyundai Accent III remained practically unchanged. The model was built on the same platform. The engineers did not change the suspension, shock absorbers, steering settings, springs and other elements. The only innovation was the overhang increased by 20 mm.

The model was offered with 2 power plants: 1.4-liter (95 hp) and 1.6-liter (112 hp) units. They were combined with a 4-speed "automatic" and 5-speed "mechanics".

Wheel parameters were the same for all modifications:

• wheels 5J for 14 ET39, tires - 175 / 70R14;
• 5.5J wheels for 14 ET46, tires - 185 / 65R14;
• 5.5J wheels for 15 ET46, tires - 195 / 55R15;
• 6.5J wheels for 16 ET47, tires - 205 / 45R16.

Generation 4 (Hyundai Solaris)

The debut of the fourth generation Hyundai Accent took place in 2010. In Russia, the model is known under the name Solaris. Moreover, the model was additionally adapted for the domestic market. She received a galvanized body and certain settings that allow you to feel more confident on Russian roads. A Korean auto maker offered the Hyundai Accent IV at a very low price. The result was not long in coming - the model quickly became a bestseller on the domestic market. Now Solaris is one of the most popular cars among Russians.

The model received a futuristic appearance that many people liked. The voluminous body and slightly elongated headlights fit perfectly into the new design concept "flowing lines".

Inside, the fourth Hyundai Accent also freshened up. There is a new dashboard and improved trim materials. The list of offered options has been significantly increased.

The model was equipped with one of two 16-valve units: 1.4-liter (109 hp) and 1.6-liter (124 hp). They were combined with a 5-speed manual transmission or a 4-speed automatic transmission.

The parameters of the wheels and tires were as follows:

• 5.5J wheels for 14 ET43, tires - 175 / 70R14;
• wheels 6J for 15 ET43, tires - 185 / 65R15;
• wheels 6J for 16 ET52, tires - 195 / 50R16;
• 6.5J wheels for 16 ET43, tires - 195 / 55R16.

You May Also Like

This div height required for enabling the sticky sidebar

The renowned Korean brand Huyndai is one of the largest car manufacturers. Among them, such a popular model as the Hyundai Accent stands out. If we are talking about the Russian market, then this car model is still one of the best-selling.

Other popular cars include the compact crossover Greta and the comfortable Goetz. Passenger cars with all-wheel drive sedan and hatchback are equipped with tires with standard sizes from 16 to 17 inches.

As for the 16-inch size, such wheels are equipped on many modifications of Hyundai cars. This figure is minimal and thanks to it you can save on the purchase of additional and cost-effective options.

In addition, it is worth highlighting the fact that the hub is used for a whole set of rims. Therefore, the car enthusiast can easily re-equip the car.

Huyndai tire and wheel sizes

Typically, for Hyundai sedan and hatchback cars, they are equipped with disks with the following standard sizes: R15, R16, R17. The South Korean crossover Hyundai Creta is factory equipped with models in 16 and 17 inches.

As for the size of tires, the following configurations are worth highlighting:

• 215/60 / R17;
• 205/65 / R16.

Basic parameters of an autodisk:

• departure ET48-45;
• centering hole 67.1;
• wheel bolt pattern 5 x 114.3.

If the car owner decided to order rims, then you must use the 6.0J / 16 marking. Samples with a total diameter of 17 inches are equipped with 4WD crossovers according to factory specifications and recommendations.

These are Hyundai cars with 4WD function and a six-speed automatic transmission, as well as mechanical counterparts.

Greta cars on 17-inch rims

There are situations when the owners of Hyundai crossovers forget that only four discs are included in the overall package. Basically the base spare wheel is 16 inches.

In this situation, when replacing the punctured wheel, serious repair work will be required. Therefore, if you use 17 inch wheels, you need a similar spare tire.

The main features of choosing tires for Hyundai

If we are talking about basic configurations of tires for Hyundai cars, then it is worth highlighting summer and winter tires. The original Kreta modifications do not include track equipment. That is, each buyer individually chooses a complete set of the car.

The size of the tires plays a very important role, since safety, dynamic performance, handling and fuel consumption of the car depend on such components.

The main advantage of the novelty from the Korean manufacturer is the equipped pressure indicators.

Many Hyundai dealerships do not advise using the services of private car services for changing wheels and bulkheads, since many specialists, even with extensive experience, can damage specially equipped sensors that regulate the pressure in tires.

Naturally, manufacturers do not provide guarantees for such elements, so it will be necessary to pay extra for a new set of sensors.

The classic readings of these devices should reveal the following values \u200b\u200bof 2.3 / 0.07 kg / cm. If the pressure in the tires begins to drop and the following readings of 33 / 1.0 psi are detected, then a special indicator on the dashboard lights up, that is, the lamp starts flashing.

Upgraded configurations of Hyundai tubeless tires usually do not cause defects during normal use of the car.

Basically, sensors are triggered at the moment of any deformation of the tire. To determine the exact value of the pressure in the wheel, it is necessary to use an electronic device Super Vision.

Departure and standard sizes of disks

Korean models Greta are very popular due to not only aesthetic indicators, but also high quality workmanship. Basically, potential buyers, wanting to purchase this crossover, consider it as a transport for many years of operation.

After a certain amount of time, many owners perform restyling. Especially in cases where crossovers are equipped with 16-inch disks that do not match the exterior of the car. The use of more massive samples will improve the appearance of the Hyundai and correct handling.

1. light-alloy wheels with standard sizes 205/65 / R17. Thus, this figure is used to mark the wheel 6.5 * 16ET48. Disc width is 6.5; wheel offset 45 and rim diameter 17;
2. stamped with sizes 205/65 / R16. The total reading is 6.5 * 16ET45, for which 15 is the rim size, 45 is the wheel offset and 6.5 disc width.

General configuration for any model of autodiscs:

• hole diameter for centering DIA 67.1 mm;
• drilling performance PCD 5 * 114.3;
• fixing nuts M12 * 1.5.

Disc bolt pattern

These indicators determine the diameter of the holes for the fasteners. The wheel is installed using special bolts.

The accepted PCD standard is used as the international abbreviation for passenger cars. If the owner of the vehicle meets the letters LZ, then this indicates the number of holes.

Fans of restyling should be very careful about this indicator. Immediately before purchasing the wheels, consultants from specialized Hyundai departments select special bolts according to the general marking recommended by the manufacturer.

However, some car owners prefer to independently find bolts for the standard indicators of fasteners.

As for the bolt pattern, this figure should be 5 * 114.3. This value must be taken into account for those who wish to use wheels separately from discs. If certain violations of the parameters of the nodes are observed, then this can lead to a deterioration in the performance of the suspension and its individual components.

Car rims on Hyundai Getz

The popular Korean model Getz is produced in several powertrain trim levels. Thus, manufacturers recommend the following values \u200b\u200bfor rims with diameters at 14, 15 and 16 inches.

Drilling and size indicators are 4/100 and 5.5j * 14, respectively. In addition, you can install rims with parameters: 7 * 16, 6 * 14, 6 * 15, 6 * 16. The hub diameter is 54.1.

In order to determine the required wheel parameters as accurately as possible: bolt pattern, hub size, offset, it is recommended to select the vehicle modification and the volume of the Hyundai Getz power unit.

Basically, Korean manufacturers produce Goetz cars with standard drive parameters 6 * 15ET46. In addition to standard configurations, the car enthusiast can choose the following sizes: 6.5 * 15ET40, 7 * 16ET40.

When it comes to fasteners, then four nuts are used for the Hyundai Getz. When installing the wheel, for some modifications it is necessary to use special centering rings.

After choosing a disc, you need to choose the size of the rubber. General standard sizes can be offered in factory versions or similar replacements of larger sizes in accordance with the instructions from the manufacturer. It is also very important to consider the fact that the radius of the selected autodisk cannot differ from the wheel fit.

Car wheels for Hyundai Accent

For the correct choice of rims for the Hyundai Accent model, you need to follow the general recommendations from the car manufacturer. First of all, we note the fact that this model uses diametric standard sizes with indicators of 13, 14 and 15 inches.

A disc element with a large size will not fit on the Accent, since the height of the wing liner does not allow the installation of enlarged discs.

As an optimal variant of the wheel, tires with standard sizes 185/65 / R15 recommended by the manufacturer are used. If we are talking about discs on Hyundai, then the 5.5j4 * 100 ET47 configurations or similar replacement options with 6.5j4 * 100 ET35-48 indicators are relevant.

Using automatic selection of tires and wheels for the car Hyundai H1, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, these components have a huge impact on a whole range of vehicle performance characteristics, from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes a whole range of knowledge about these products.

Unfortunately, or, on the contrary, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. Regardless, the automatic selection system will prove to be extremely useful, as it will minimize the likelihood of choosing the wrong wheels or tires. And he, thanks to the widest assortment presented in the Mosavtoshin online store, is very diverse.