Using automatic selection of tires and wheels for the car Kia ceed, you can avoid many problems associated with their compatibility and compliance with the recommendations of the car manufacturers. After all, these components have a huge impact on a whole range of vehicle performance characteristics, from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why it is extremely important to approach their selection very responsibly, using for this reason enough specific knowledge about these products.

Unfortunately, only a small part of car owners own such technical nuances. Regardless of this, the automatic selection system will be extremely useful, that is, it allows you to minimize the likelihood of making the wrong decision when choosing certain tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.

If non-standard wheels are installed on the car, this can lead to friction and increased wear. Therefore, it is worth adhering to the factory standards. Therefore, the correct selection of wheels is essential.

Wheel looseness

On the Kia Sid, different wheels were used in different generations. Usually this information is indicated in the service book, or technical documents of the car. Also, there is a sign on each vehicle that says which wheels and tires are suitable.

Wheels Kia Sid.

Characteristics

Consider the wheel bolt pattern for Kia Sid according to the manufacturer's data by year of manufacture and generation:

Selection of rims.

Wheel size Kia Cee'd (JD):

PCD 5 × 114.3 with a diameter from 15 to 16, width from 6J to 6.5J, offset from 45 to 51. Similar parameters to Kia Cee'd SW (JD) 1.6 CRDi 128 2018. Tire size from 15 to 16, width from 195 to 205 and a profile from 55 to 65.

Non-standard Kia Sid wheels.

Conclusion

As you can see, a lot of tires and wheels fit on the Sid, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and alloy wheels.

Surely you will agree that the car will look much better if it has wheels of the original design. That is why many car enthusiasts are striving to replace standard wheels with others - more advanced and attractive. However, in this kind of tuning, you need to scrupulously approach the technical parameters of the wheels. The main characteristic to look out for is the bolt pattern. In this short article, you will learn the wheel pattern of the popular Kia Sid car of different years of production.

Almost the first cars that saw serial production and fell in love with the domestic motorist. They were produced with two wheel diameters:

The above data applies to machines equipped with engines:

Drilling Kia Ceed 2010

This year the car has been subject to improvements and some changes. Cars of this period are quite popular and widespread in the territory of the Russian Federation and not only.
This year was completed with the following wheels:

1. R15 with tire size 195/65, while the wheel offset is 47 mm, and its size is 15x5.5.
2. R16 with a tire size of 205/55 with a disc offset of 51 mm, and a size of 16x6.5.

The above data also applies to models equipped with engines: 1.4L; 1.6 CDRI; 1.6L; 2,0L crdi.

All other variants were produced with the following characteristics:

• Disc size 15 × 6.0, offset 45 mm., Tire size 185 / 65R15;
• Disc size 15 × 6.0, offset 45 mm., Tire size 195 / 65R15;
• Disc size 15 × 6.0, offset 45 mm., Tire size 205 / 60R15.

For all the above configurations, the bolt pattern is 5 × 114.3

Drilling Kia Ceed 2013

The line has improved, but the production of cars this year was carried out with only two engine options:

1. Kia Sid 1.4
2. Kia Sid 1.6

The first option was completed with wheels with a disk size 15 × 6.0, departure 45 and tire size 195 / 65R15.

The second option is disk size 16 × 6.5, departure 46 and tire size 205 / 55R15.

Both configurations have a bolt pattern of 5 × 114.3.

It is worth noting that all cars of this model of different years of production have the same drilling (5 × 114.3), so it is almost impossible to make a mistake in its selection. The only thing you need to pay attention to is the tire size and other parameters.

In the overwhelming majority of cases, the selection of tires and wheels for a car Kia Ceed 2011 allows you to significantly reduce the time to find a suitable option.

Without this option, the buyer had to manually search among several thousand items of the extensive assortment of the Mosavtoshina online store. At the same time, there is a very high risk that the chosen option will not be suitable for the car. After all, this requires that car owners have certain knowledge in this area, which most of them cannot boast of. To use all the capabilities of our automatic selection system, you only need to know the make, model and year of production of your car. This information is indicated literally in a few clicks of a computer mouse on the corresponding inscriptions on the screen. This information seems scarce only at first glance. They are more than enough for the car owner to end up with a list of at least several models of rims and tires, each of which very closely matches the recommendations of the car manufacturer.

The KIA car has long gained great popularity among Russian motorists. It is equipped with only modern parts that are easy to modify. Discs installed on the machine can be of several types - steel, cast, magnesium.

The most common are usually stamped steel. They are made from sheet steel by stamping.

At the factory, the machines are equipped with just such products. This is due to their low cost.

Of course, it can be installed on the car and other models, for example, cast. But we must take into account their characteristics and the mode of operation of the car. Casting has several negative qualities.

For example, on an aluminum surface after a while, an oxide film may appear, which greatly spoils the appearance.

Kia ceed

It has several types of body and different equipment depending on the date of manufacture.

Disc designs can be conventional stamped or more expensive light alloy made from aluminum alloy.

The diameters of such products are in the range of 15 - 17 inches.

To carry out tuning on the Kia Sid, you can install discs 225 / 40.R18.

Kia Optima IF

The model began production in 2000. Until 2005, she completely copied the Hyundai Sonata. The only difference was the equipment of the machine and its design.

In any version, the car had discs with the dimensions indicated in the table:

In 2005, the Koreans introduced a completely different car. It was completely different from its Hyundai Sonata counterpart. The sizes of the disks have also changed.

Suitable for cars produced in 2005-2010:

Today, a new Kia Optima model is offered for sale on the market, equipped with wheels with dimensions:

Kia rio

At the factory, the car is equipped with models R15 - R16. The main role in the choice of parameters is played by the vehicle equipment. By default, the Kia Rio is equipped with products with dimensions:

You can, of course, install discs of a different design. But any of them must correspond to the dimensions indicated in the table. Large deviations will lead to poor vehicle dynamics. The suspension will start to fail, fuel consumption will increase.

Kia sorento

This mid-size crossover was manufactured by the Korean company Kia Motors. It was shown to the public in 2002 at the Chicago Salon. In the factory configuration, the Kia Sorento is equipped with a 7.5Jx16ET40 wheel, the diameter is in the range of 17-19 inches.

Main dimensions:

• 5j x 17,
• 5j x 18,
• 5j x 19,
• 7j x 17,
• 7j x 18.

Other discs can also be installed on the car, but with dimensions close to those recommended by the manufacturer.

Kia soul

The popularity of this brand in Russia is evidenced by the number of cars sold to Russians. This number has already passed the milestone of 10,000. At the Kia Soul plant it is completed with 6Jx15 stampings for 195/65 R15 tires.

The mid-range car is equipped with more expensive light-alloy 6.5Jx16. Suitable tires 205/55 R16. Luxury equipment includes alloy wheels 7Jx18 with tires 225/45 R18.

• R16 - ET 42-46 mm.
• R17 - ET 44-48 mm.
• R18 - ET 50-55 mm.

Kia sportage

When choosing wheels for Kia Sportage, as well as for other Korean cars, it is advisable to follow the manufacturer's recommendations. Of course, to increase the ground clearance, you can use discs with other sizes. However, this will greatly change the technical characteristics of the machine.

Factory drive sizes:

• 5Jx16, ЕТ 31.5, DIA 67.1,
• 5Jx17, ЕТ 35, DIA 67.1,
• 7Jx18, ET 40.5, DIA 67.1.

For replacement, you can use discs with sizes:

• 7x165 / 114.3ET39,
• 7.5x165 / 114.3ET39,
• 7x175 / 114.3ET39,
• 7x175 / 114.3ET36,
• 7.5x175 / 114.3ET34,
• 8x185 / 114.3ET32.

Kia spectra

A budget car with 14-inch wheels with 185/65 R14 tires. The wheel arch of the Kia Spectra allows the installation of R15-R16. However, such an increase in wheels can lead to a deterioration in dynamic performance and an increase in fuel consumption.