The content of the article:

How to open the hood of a Ford Focus. The Ford Fokus has a lockable bonnet that isn't easy to open without first knowing it.

How to open the hood of a Ford. As we can see in the photo above, you need to insert the hood ignition key into the lock box under the “Ford” logo on the radiator grille, which must be turned up and left. Ford focus story.

Curious!Throughout its history, the company logo has changed 8 times, while the name Ford itself has never disappeared from the emblem.

The Ford Focus is equipped with a lockable hood. The opening procedure is somewhat original and in the absence of initial information is difficult.

We heat the screwdriver over the flame and try to drown the hot tip in the plastic latch. Either rusted, or just fell off, although there may be something else. Home Consultation with the author. Next, you need to do the following: One of the most common malfunctions of this mechanism on a Ford Focus is a situation when the thrust jumps out of the groove.

How to open the hood on Ford Focus 2

There is no cable here, and it is not possible to open it from the passenger compartment, at least in this configuration. Having inserted the key, as indicated in the instructions in the photo, you can see, first turn it counterclockwise to the left half a turn, while simultaneously pulling the hood up, and immediately turn the key half a turn clockwise to the right - the hood is open.

Since the radiator grille is located far from the hood lock itself, at the time when we turn the key, we turn this red arrow rod, which, in fact, opens the lock. As a rule, the cylinder of the bonnet lock breaks. People, as a rule, immediately run screaming - the hood lock has broken, buy a Ford Focus hood lock! But, it breaks, neither the lock nor the rod is broken, this rod in the photo above simply jumps out of the groove. As a rule, the fixing antennae of the gimbal socket, which you see in the photo above, wears out or breaks.

And the cardan is already jumping out of its place at every turn of the key and trying to open the hood. To do this, either change the lock cylinder, or insert the cardan into place and wrap it with electrical tape, or even better - solder the cardan and the larva.

Then I found how to open it with a screwdriver, put it on top of this cable and pressed hard on the white core, and at that moment the comrade was turning it with a key. The hood opened, the mechanism assembled, everything worked ... until recently. Again the same story, only now the screwdriver does not help: he has suffered himself, friends too - it does not go and that's it. I found the topic of how men fry the same white core with a red-hot screwdriver and then this screwdriver serves as a key. Only no one says how before that they removed this cable traction, so that then there would be right in the center to poke.

I nervously pulled this cable, it split into two halves: from the side of the key there was the upper rubber part, and from the side of the motor - the iron center. Like the author, he came across a cardan that jumped out of the groove, and to his surprise, he discovered an even easier way to open the hood without a key. In the picture showing the inserted screwdriver, the protective plastic grill is clearly visible.

This grill can be partially pulled out of its fastening grooves with bare hands and without damage, and then, passing through the gap formed from below between the machine body and this grill, pass your hand or hands and insert the cardan into the groove. Or you can, by inserting it into one groove, pull it out of the mask, scroll it in one direction or the other, and voila, the hood will be unlocked.

Home Consultation with the author. Renault Sandero trunk lock repair. How to open a jammed lock. Removal and replacement of spark plugs. Is it possible to remove the crankcase and bumper protection from below to reach the lock? Add a comment Cancel reply. Proudly powered by WordPress.

How to open a Ford trick and not go to jail

How to open the hood on Ford Focus 2

Here is blah-blah-blah about the second generation of Focus, and then I'll move on to the main question: How does the hood of Focus 2 open ?!

As you already know, the Ford Focus 2 hood lock is located under the badge on the radiator grill and you cannot open it from the passenger compartment. This is a very unusual solution, and it sometimes bugs. The pull of the hood lock is weak and periodically pops up, so it will not work to open it with a key and you will need improvised means.

What did you think when the hood didn't open? The larva has broken? Perhaps, but it seems to me that it just flew off or jammed the lock bracket.

First, see how easy it is to open the hood Focus 2

They turned the key half a turn to the left, lifted the lid, and then clockwise to the right. Simple? But you should have noticed the lack of a key. Yes, they did it without a key)

How to open the hood if the lock bracket has flown off on Ford Focus 2

In order to open the hood without a key, you will need to prepare a special device or a long flat screwdriver.

We insert it through the radiator grill into the groove for fastening the rod and repeat the usual opening of the lock.

The video below clearly shows how to do this.

If the mount does not look like this, then a little more hemorrhoids, but it's also very simple.

We turn on the music louder. We will swear loudly and more than once.

We pull out the cable as shown in the photo:

Insert the screwdriver and press just above the cable.

This is the place I was looking for for half an hour.

After pressing in the correct place, you will hear a click. After clicking, do not remove the screwdriver from this place, as you will need to quickly scroll the key first to the left and then to the right. I must emphasize that when you find the right screwdriver position and the right amount of pressure, the hood will suddenly pop out on the left turn of the key and then open on the right, it is important not to get too excited and stop the screwdriver pressure. If you do this, then you will lose touch and you will have to start all over again.

I drive Focus

Kharkiv region, Energodar

How to open the hood on Ford Focus 2

Here is blah-blah-blah about the second generation of Focus, and then I'll move on to the main question: How does the hood of Focus 2 open ?!

As you already know, the Ford Focus 2 hood lock is located under the badge on the radiator grill and you cannot open it from the passenger compartment. This is a very unusual solution, and it sometimes bugs. The pull of the hood lock is weak and periodically pops up, so it will not work to open it with a key and you will need improvised means.

What did you think when the hood didn't open? The larva has broken? Perhaps, but it seems to me that it just flew off or jammed the lock bracket.

First, see how easy it is to open the hood Focus 2

They turned the key half a turn to the left, lifted the lid, and then clockwise to the right. Simple? But you should have noticed the lack of a key. Yes, they did it without a key)

How to open the hood if the lock bracket has flown off on Ford Focus 2

In order to open the hood without a key, you will need to prepare a special device or a long flat screwdriver.

We insert it through the radiator grill into the groove for fastening the rod and repeat the usual opening of the lock.

The video below clearly shows how to do this.

If the mount does not look like this, then a little more hemorrhoids, but it's also very simple.

We turn on the music louder. We will swear loudly and more than once.

We pull out the cable as shown in the photo:

Insert the screwdriver and press just above the cable.

This is the place I was looking for for half an hour.

After pressing in the correct place, you will hear a click. After clicking, do not remove the screwdriver from this place, as you will need to quickly scroll the key first to the left and then to the right. I must emphasize that when you find the right screwdriver position and the right amount of pressure, the hood will suddenly pop out on the left turn of the key and then open on the right, it is important not to get too excited and stop the screwdriver pressure. If you do this, then you will lose touch and you will have to start all over again.

The second generation of the popular car ford Focus contains many plastic elements, including the bonnet lock. The mechanism of the system is made of metal, but has a plastic drive that can fail at the most inopportune moment. In such situations, the owner needs to be able to open the hood without a key.

Features of the locking structure of the Ford Focus II hood

On this car the bonnet latch actuator is designed in an unconventional manner. Usually the drive is activated by a cable passing under the hood and ending with a special handle, and this system is also duplicated in the end switches of the main lock.

The hood can be unlocked only with a key and from the street, by pulling the nameplate on the grille, inserting the key into the lock cylinder, turning the key half a turn counterclockwise. Next, you need to raise the hood, turn the key half a turn clockwise, and only then you can unlock the hood completely.

Of course, this system can hardly be called convenient, but the owners of the second Focus have no choice. Another feature of this design is the presence of plastic rods, which are also not very reliable. According to the owners' reviews, such a thrust going to the lock latch quickly fails, ceasing to engage with the groove. As a result, the rotation with the key is carried out, but the lock has broken, and it will no longer be possible to open it in the traditional way.

What if the hood lock is broken?

So how to open a Ford Focus II without a key if the hood is not unlocked with a lock? Often the structure itself does not play any role here, because the metal structure allows the lock to work almost without interruption. Plastic elements and rods from which the larva is made are becoming a problem.

In case of failure or wear of the rod, you can try to put it in place:

• We dismantle the motor protection, after which we have direct access to the lock - it will be noticeable what happened to the structure.
• From under the car, you can install the rod into place to open the hood or trunk of the Ford Focus 2, and then carry out further diagnostics.

The complexity of the situation lies in the fact that it is unlikely that it will be possible to buy a traction separately, since it is sold together with the lock. If you can find the structural elements of the castle piece by piece, it will be good luck.

There is also a second method, suitable for extreme situations when you really need to unlock the hood. You can pick the lock with a long flat screwdriver, and you will also need a powerful fire source (for example, a gas burner) and a flashlight.

The algorithm of actions is as follows:

• We shine a lantern through the radiator grill, consider the structure of the lock and look for a plastic element, which includes the pull of the lock cylinder.
• We heat the screwdriver with a gas burner and smoothly lead it into the opening of the grate, then press with a hot sting on the plastic heel of the locking structure in order to melt the groove. Then we press hard and try to aim at the middle of the part.
• We hold the tip of the screwdriver in this position for a few seconds, and when the metal has cooled down, we take out the tool.
• We wait until the screwdriver cools down, again penetrate into the groove with a sting and turn the lock, as if we were doing it with a key. The scheme for opening the Ford Focus II lock is described above.

How can you open the rest of the Ford Focus II locks without a key?

Questions about how to open Ford Focus 2 without a key are quite common among the owners of these cars. There are situations when the driver forgot the key in the passenger compartment or trunk, got out of the car, and the door slammed shut. It also happens that the engine was started, but it was necessary to leave the car, and then the doors were locked. The key is in the ignition and the spare is at home. The situation is complicated if such an adventure happened far from settlements.

Another problem is possible - Ford Focus 2 does not see the key, due to rusted or crumbling lock larvae. Breaking a window is very expensive, so other options should be sought. Fortunately, they exist.

The first way to open the car without a key

Almost every person in the car has a hacksaw blade or a steel ruler. These products need to be bent a little, about ten centimeters from the beginning. Further, the ruler is scrolled downward, pushed into the hole between the glass and the seal located in the lower zone of the driver's glass.

Do not be afraid of this action, because the glass will work as a guide. You will be able to penetrate the interior with a ruler, after which you should reach the button that activates the lowering of the glass. Convenient pressing is carried out by bending the ruler, after which you can get into the salon.

Second way

Opening the doors of the Ford Focus II according to the second method consists in lifting the element upward by means of the hinge thrown over the door latch, unlocking the door. This action will require a piece of fishing line, flexible wire or rope 2 times the width of the door.

To get into the cabin, you need to slightly pull the driver's door and pry it with any object that acts as a lever. An old credit card, a flat screwdriver, a knife wrapped in tape will work well, but you need to act carefully so as not to damage the paintwork of the machine.

We bend the upper right corner of the driver's door and carefully insert the line, moving it around the perimeter of the part. We bring the line to the horizon position below the door window, and then tie a loop. Initially, this is not done so that the loop does not tighten when the line is drawn into the door structure.

We tighten it in the form of a stranglehold in such a way that when tightening it becomes untied. Carefully pull the product with the loop back into the salon, throw in the clip, tighten it and drag it up to unlock the door.

Third way

There is another way to open the car door without a key. Ford Focus II cars have one "sore" - a drop in the bonnet lock, which has already been described above. This element is made of two plastic elements, one of which moves over the other. When oil or dirt accumulates, the rod begins to perform poorly, and then falls out of the guide under pressure. This situation prevents the hood from being opened.

To solve the problem, you need to take half a meter of strong wire and bend it with a hook from the end. We take away the car's nameplate, shine through with a flashlight and push the hook under the hood. We notice the reciprocal element of the round-shaped lock structure, rotating together with the antennae during the opening of the lock.

It is necessary to insert the hook, catching on the antennae, and turn the lock left and right, imitating the actions performed by the key. The lock will open, then you should find the jumped out lock rod, remove it and move it around to remove dirt and develop a system. After cleansing, the traction should be returned to its place by inserting the antennae into the ball, as well as installing another element in the designated place.