Founded in 1899 in Turin, FIAT is Italy's largest automaker. Under the Fiat brand, passenger cars (mainly models of the budget and middle price segment) and commercial vehicles are produced, the concern also owns the car brands Ferrari, Alfa Romeo, Maserati, Lancia, Abarth. In 2014, as a result of the merger of FIAT S.p.A. and the Chrysler group (brands Chrysler, Dodge, Jeep, Ram, SRT), the Fiat Chrysler Automobiles (FCA) corporation was formed - one of the world's largest automakers in terms of output.

Fiat cars are widespread in Europe, and they are also popular in Brazil, Turkey and Poland, where they are produced in partnership with local factories. In the 1960s, FIAT actively participated in the construction of the Volzhsky Automobile Plant in the USSR.

What kind of oil to fill in a Fiat engine depends on the model, modification and year of manufacture of the car.

TOTAL QUARTZ INEO MC3 5W40

The new generation engine oil TOTAL QUARTZ INEO MC3 5W40 is recommended for Fiat gasoline vehicles from 2010, in particular, the Punto, Grande Punto, Linea, 500 (1.2, 1.4, 0.9 TwinAir), Panda, Bravo, Croma models, for which an approval is required car manufacturer FIAT 9.55535-S2. This oil provides a very high level of engine protection in all operating conditions (city, highway, sports driving) - according to the results of independent tests of the European Association of Automobile Manufacturers (ACEA) on a gasoline engine, the wear of camshaft cams when using TOTAL QUARTZ INEO MC3 5W40 is reduced by 70% compared with standard oil. Due to its high oxidation stability, this oil meets the requirements of car manufacturers for an extended drain interval.

TOTAL QUARTZ INEO ECS 5W-30

For diesel vehicles of the brand equipped with a particulate filter (DPF), TOTAL recommends TOTAL QUARTZ INEO ECS 5W-30 low ash engine oil. Due to Low SAPS technology with a reduced content of phosphorus, sulfur and sulphated ash, as well as metal compounds, it optimizes the operation of exhaust aftertreatment systems, reducing the content of harmful substances in it, and extending their service life. It also protects the engine against wear and reduces fuel consumption by up to 3.5% compared to conventional oils, according to ACEA tests. TOTAL QUARTZ INEO ECS 5W-30 is suitable for all FIAT cars and commercial vehicles requiring ACEA C2 oils, including those with Multijet diesel engines.

TOTAL QUARTZ 9000 5W40

Universal motor oil TOTAL QUARTZ 9000 5W40 can be used in FIAT cars of Albea and Doblo models, as well as cars of the brand with gasoline and diesel engines without post-treatment filters until 2010, where the oil properties level is not lower than ACEA A3 / B4 and API SN / CF.Its anti-wear and cleaning properties guarantee a high level of engine protection in difficult driving conditions, including commercial vehicle operation, and its oxidation resistance maintains its characteristics throughout the service interval. Low-temperature fluidity of TOTAL QUARTZ 9000 5W40 oil provides confident engine start in frosty weather.

TOTAL QUARTZ 7000 10W40

For Fiat engines with significant mileage, requiring the properties of ACEA A3 / B4 and API SN / CF oils, a synthetic engine oil TOTAL QUARTZ 7000 10W40 is suitable. This oil has a high viscosity and provides effective protection of engine parts even with increased gaps between them due to wear, thus increasing the unit's service life. A complex of special dispersant additives prevents the formation of deposits and keeps the engine clean.

Fiat transmission oils

Depending on the performance level required by the manufacturer, TOTAL recommends TOTAL TRANSMISSION DUAL 9 FE 75W90 transmission oils for Fiat with a manual gearbox (for cases when an oil with a performance level GL-4 / GL-5 / MT-1 / MIL- PRF-2105E) and TOTAL TRANSMISSION GEAR 8 75W80 (when GL-4 + trait level is required). They protect the box from wear and corrosion under high stress conditions, extending their life. Fuel Economy (FE) technology reduces friction between drivetrain components and helps reduce fuel consumption.

Fiat Doblo is a compact utility vehicle, first introduced in 2001. Doblo of the first generation received passenger and cargo modifications, as well as gasoline and diesel engines. There were also gas-fueled versions. Restyling took place in 2005. The car has received an improved design. Doblo of the first generation was produced in Turkey, as well as in Brazil and Vietnam. In 2006, production was organized in Russia, at a plant in Naberezhnye Chelny.

In 2011, the car left Russian car dealerships for some time, which was due to the termination of cooperation between Sollers and Fiat. Nevertheless, the car soon returned to the Russian market, but this time the car was supplied from Turkey, where Fiat Doblo was produced until 2014. Russian sales of the first generation Fiat Doblo ended in 2016. The car was offered with a 77-horsepower 1.4 liter engine and a manual 5-speed gearbox.

As for the second generation Fiat Doblo, it began to be produced in Turkey back in 2009. In Russia, the car appeared only in 2018. It should be noted that two more cars are produced on the basis of Doblo II - these are Opel Combo and Ram ProMaster City. Engines - petrol, 1.4 liter, 95 or 120 horsepower. The basic configuration includes a driver's airbag, ESP, power windows for the front doors and electric mirrors. Additional options are a second airbag and rear power windows.

How much engine oil is needed for Fiat Doblo

Generation 1 (2000-2010)

• Engine oil 1.2 - 2.8 l
• Engine oil 1.4 - 2.6 l
• Engine oil 1.9 - 4.3 l

Generation 2 (since 2010)

• Engine oil 1.2 3.2 l
• Engine oil 1.4 - 2.7 l

Fiat Doblo is an LCV utility vehicle produced in Turkey since 2001. In addition, the model is assembled in Brazil and Vietnam. The first generation car was available in cargo and passenger versions, as well as gasoline, diesel and gas engines. In 2005, a restyling took place, as a result of which the exterior and interior of the car changed.

In addition to factories in Turkey, Brazil and Vietnam, in 2006 an assembly site appeared in Russia, in Naberezhnye Chelny. Then a partnership was concluded between Fiat and Sollers, which was suspended in 2011. This resulted in a complete cessation of production of Fiat Doblo in Naberezhnye Chelny. Later, only Turkish-assembled cars were supplied to Russia.

The production of the first Fiat Doblo in Turkey continued until 2014, and Russian sales were finally discontinued in 2016. The car was available with a 77-horsepower 1.4-liter engine and a manual transmission.

In 2009, production of the second generation Fiat Doblo began in Turkey. The car received a 1.4-liter gasoline engine with a capacity of 95 liters. with., as well as a manual transmission. In Russia, the car has been available since 2016 in two variations - passenger and cargo. So, the basic cargo version (carrying capacity 900 kg) is estimated at 1 million 30 thousand rubles. In this version, the car is equipped with two airbags, a stabilization system, as well as electric mirrors and side windows.

The debut of the Fiat Doblo model took place in 2000 with the presentation of its first generation. At that time, she was a vivid example of a competent and harmonious combination of the properties of a station wagon, a commercial van and a minivan for family trips in one car. Doblo had a spacious roomy interior, comfortable seats and a line of unpretentious power units running on one of 3 types of fuel: gasoline, diesel and gas. In 2005, the first restyling took place, during which the exterior and interior design was corrected. The multipurpose model has earned a lot of positive reviews for its reliability, high ground clearance and simplicity. At the same time, its main drawbacks were poor sound insulation and a frankly weak gasoline engine.

Despite the rich range of engines, Russian deliveries of Doblo were limited exclusively to the 1.4-liter gasoline version with 77 hp. with manual transmission. Such a motor did not differ in high traction - the maximum speed was up to 148 km / h, the first hundred in 15 seconds, and the fuel consumption at the same time exceeded 7 liters per 100 km in the combined cycle (9 liters in the city and 6 on the highway). Much more popular in Russia turned out to be more charged, but used copies from the European market, namely 1.3d and 1.9d turbodiesels (85-105 hp). Below is information about the types of oil poured into these motors and its quantities. Gas modifications were presented by a 1.6-liter engine with 91 hp. in the asset.

The second generation of Doblo has been produced since 2010. Now it is a cargo van, a mini-truck, a combined utility vehicle, and also a regular family minivan. At the same time, the engine compartment of the model is occupied by 3 diesel units (1.3d, 1.6d, 2.0d) and one 1.4-liter gas engine. Doblo II deliveries to domestic salons were planned for 2015, but did not reach our market. In the same year, Fiat's brainchild underwent the second restyling in its history.

Generation 1 (2000-2010)

Engine 223A5000 1.2

• How many liters of oil in the engine (total volume): 2.8 liters.

Engine 350A1000 1.4

• What kind of engine oil is filled from the factory (original): Semi-synthetics 10W40
• Oil types (viscosity): 5W-40, 10W-40
• How many liters of oil in the engine (total volume): 2.6 liters.
• Oil consumption per 1000 km: up to 400 ml.
• When to change the oil: 10000-15000

Engines 223A6000 / 186A9.000 1.9

• Oil types (viscosity): 5W-40, 10W-40
• How many liters of oil in the engine (total volume): 4.3 liters.
• Oil consumption per 1000 km: up to 400 ml.
• When to change the oil: 10000-15000

Generation 2 (2010-present)

Engines 263A2.000 / 199A3.000 1.2

• What kind of engine oil is filled from the factory (original): Synthetics 5W30
• Oil types (viscosity): 5W-30, 5W-40
• How many liters of oil in the engine (total volume): 3.2 liters.
• Oil consumption per 1000 km: up to 400 ml.
• When to change the oil: 10000-15000

Engine 843A1000 1.4

• What kind of engine oil is filled from the factory (original): Synthetics 5W40
• Oil types (viscosity): 5W-40, 10W-40
• How many liters of oil in the engine (total volume): 2.7 liters.
• Oil consumption per 1000 km: up to 400 ml.
• When to change the oil: 10000-15000

Founded in 1899 in Turin, FIAT is Italy's largest automaker. Under the Fiat brand, passenger cars (mainly models of the budget and middle price segment) and commercial vehicles are produced, the concern also owns the car brands Ferrari, Alfa Romeo, Maserati, Lancia, Abarth. In 2014, as a result of the merger of FIAT S.p.A. and the Chrysler group (brands Chrysler, Dodge, Jeep, Ram, SRT), the Fiat Chrysler Automobiles (FCA) corporation was formed - one of the world's largest automakers in terms of output.

Fiat cars are widespread in Europe, and they are also popular in Brazil, Turkey and Poland, where they are produced in partnership with local factories. In the 1960s, FIAT actively participated in the construction of the Volzhsky Automobile Plant in the USSR.

What kind of oil to fill in a Fiat engine depends on the model, modification and year of manufacture of the car.

TOTAL QUARTZ INEO MC3 5W40

The new generation engine oil TOTAL QUARTZ INEO MC3 5W40 is recommended for Fiat gasoline vehicles from 2010, in particular, the Punto, Grande Punto, Linea, 500 (1.2, 1.4, 0.9 TwinAir), Panda, Bravo, Croma models, for which an approval is required car manufacturer FIAT 9.55535-S2. This oil provides a very high level of engine protection in all operating conditions (city, highway, sports driving) - according to the results of independent tests of the European Association of Automobile Manufacturers (ACEA) on a gasoline engine, the wear of camshaft cams when using TOTAL QUARTZ INEO MC3 5W40 is reduced by 70% compared with standard oil. Due to its high oxidation stability, this oil meets the requirements of car manufacturers for an extended drain interval.

TOTAL QUARTZ INEO ECS 5W-30

For diesel vehicles of the brand equipped with a particulate filter (DPF), TOTAL recommends TOTAL QUARTZ INEO ECS 5W-30 low ash engine oil. Due to Low SAPS technology with a reduced content of phosphorus, sulfur and sulphated ash, as well as metal compounds, it optimizes the operation of exhaust aftertreatment systems, reducing the content of harmful substances in it, and extending their service life. It also protects the engine against wear and reduces fuel consumption by up to 3.5% compared to conventional oils, according to ACEA tests. TOTAL QUARTZ INEO ECS 5W-30 is suitable for all FIAT cars and commercial vehicles requiring ACEA C2 oils, including those with Multijet diesel engines.

TOTAL QUARTZ 9000 5W40

Universal motor oil TOTAL QUARTZ 9000 5W40 can be used in FIAT cars of Albea and Doblo models, as well as cars of the brand with gasoline and diesel engines without post-treatment filters until 2010, where the oil properties level is not lower than ACEA A3 / B4 and API SN / CF.Its anti-wear and cleaning properties guarantee a high level of engine protection in difficult driving conditions, including commercial vehicle operation, and its oxidation resistance maintains its characteristics throughout the service interval. Low-temperature fluidity of TOTAL QUARTZ 9000 5W40 oil provides confident engine start in frosty weather.

TOTAL QUARTZ 7000 10W40

For Fiat engines with significant mileage, requiring the properties of ACEA A3 / B4 and API SN / CF oils, a synthetic engine oil TOTAL QUARTZ 7000 10W40 is suitable. This oil has a high viscosity and provides effective protection of engine parts even with increased gaps between them due to wear, thus increasing the unit's service life. A complex of special dispersant additives prevents the formation of deposits and keeps the engine clean.

Fiat transmission oils

Depending on the performance level required by the manufacturer, TOTAL recommends TOTAL TRANSMISSION DUAL 9 FE 75W90 transmission oils for Fiat with a manual gearbox (for cases when an oil with a performance level GL-4 / GL-5 / MT-1 / MIL- PRF-2105E) and TOTAL TRANSMISSION GEAR 8 75W80 (when GL-4 + trait level is required). They protect the box from wear and corrosion under high stress conditions, extending their life. Fuel Economy (FE) technology reduces friction between drivetrain components and helps reduce fuel consumption.