For supporting normal mode engine operation on a car Hyundai accent, also known as TagAZ, it is necessary to periodically change the lubricating fluid. This simple operation is easy to do with your own hands, if you strictly follow the instructions and perform the necessary actions.

Stages of replacing the lubricant Hyundai Accent

When changing the oil, it will not be superfluous to inspect all components for leaks, so that if a leak is found, take measures to eliminate it. The best option there will be a pit or overpass for replacement, for more convenient access to the drain holes.

Oil change instructions will be useful for owners following models Hyundai brands:

• Hyundai Accent (Hyundai Accent Restyling);
• Hyundai Accent Tagaz;
• Hyundai Verna;
• Hyundai Excel;
• Hyundai Pony (Hyundai Pony).

Popular engines are gasoline engines with a volume of 1.5 and 1.3 liters, as well as diesel version with a 1.5 liter engine. There are models with a different displacement, but more often they were sold in other markets.

Waste fluid draining

You need to change the lubricating fluid on a warm, but slightly cooled engine, so there is little time to remove the protection. To get normal access to the sump as well as the oil filter.

For unscrewing the filter element, it is advisable to have a special puller. If it was not available, you can try to unscrew the filter with improvised means. For these purposes, you can use, for example, an old alternator belt, a regular belt, a bicycle chain or a simple screwdriver.

Unscrewing the oil filter using improvised means

Using this method, it will turn out to drain the maximum of the oil that has spent its life, after which you can proceed to further action... The main thing is not to forget that everything that we unscrewed needs to be put in place.

Flushing the lubrication system

1. Flushing the engine on a Hyundai Accent car should be carried out only in exceptional cases, which include:
2. Purchase of a used car when you cannot be sure of the quality, as well as the regularity of the replacement of the lubricant composition.
3. During operation, the replacement service interval was repeatedly exceeded.
4. Engine operation with constant frequent overheating, which contributes to coking, as well as other deposits.
5. In cases of switching to another type of oil, for example from synthetics to semi-synthetics.

There are several types of flushes for the Hyundai Accent engine:

• Five or seven minutes, capable of cleaning even the most difficult deposits. They must be used very carefully, strictly follow the instructions printed on the package. It is recommended to use them only when absolutely necessary. Since there is a high probability of causing premature wear of the packing seals. And also clog the oily channels with particles of washed off carbon.
• Special formulations that are added to the oil several hundred kilometers before the intended replacement. They are more gentle, but there is also the possibility of clogging the oil channels.
• Flushing oil is the most gentle method for cleaning the inside of the engine. Such a composition is poured after draining the mining, the engine runs for 15-20 minutes, after which the liquid with deposits is drained. The absence of aggressive additives in the flushing composition, gently cleans the engine, but is not able to remove strong dirt.
• Regular oil that you intend to use when changing. This method is not so popular due to its high cost.

Before flushing on a Hyundai Accent, all the pros and cons should be weighed. And also understand that it will not work to completely drain the liquid. Some of it will remain in the channels, which will then be mixed with new oil.

Installing the filter, filling with new engine fluid

If the Hyundai Accent lubrication system is sealed and does not require renovation works to eliminate the leak, you can proceed to filling with fresh oil. In addition to the oil itself, a new washer gasket is required for drain plug Hyundai / Kia 21513-23001 (2151323001). And also the original oil filter Hyundai / Kia 26300-35503 (2630035503). If you wish, you can see analogs on the Internet.

Expendable materials

When everything is ready, move on to the bay:

1. We put in place the drain plug with a new washer.
2. We twist and put in place the oil filter. Pre-lubricate the rubber sealing ring with fresh oil.
3. Pour new oil into the filler neck.
4. We check the level on the dipstick, it should be between the MIN and MAX marks.
5. We start the engine, let it run for 10-15 seconds, then turn it off.
6. After 5 minutes, check the level with a dipstick, top up if necessary.

There are several opinions about replacing the oil filter. Many car owners advise refilling it with new oil before installing. However, in official instructions manual for Hyundai Accent. And also in the information from global filter manufacturers it is recommended to simply lubricate the O-ring.

Replacement frequency, which oil to fill

According to the manufacturer's regulations, service replacements engine oil are carried out every 15,000 kilometers or with an interval of 1 year. But many motorists consider this interval to be highly overestimated, while recommending cutting it in half.

By recommendation automobile concern for filling the lubrication system gasoline engines you need to use the original synthetic Hyundai Turbo Syn 5W-30 or 5W-40 oil. The use of semi-synthetics Hyundai Super Extra 5W-30 is allowed. For diesel engines used Hyundai Premium DPF Diesel 5W-30.

From factory to hyundai models Accent was most often filled with a synthetic composition Shell helix Ultra 5W-30. But on the Internet you can often find reviews of people that they have oil filled with other viscosity parameters, for example 5W40. Most likely this is due to the operation of cars in different climatic zones, as well as those serviced by different dealers.

When selecting analogs, everyone has their own preferences for brands of oil manufacturers. Someone uses Korean, someone is looking for cheaper and floods Lukoil. But most people trust global brands such as Elf, Shell or Liquid Molly.

How much oil is in the engine lubrication system, volume table

Leaks and problems

The more Hyundai Accent's mileage becomes, the more problems arise, as in principle in any car. Some motorists start to complain about increased oil consumption. Others continue to operate the car, citing the fact that it is normal to consume 1-2 liters from replacement to replacement.

Most frequent problem increased consumption in this model there are oil scraper seals, or buried oil scraper rings, but most likely these are seals. Therefore, their replacement, as well as the transition from synthetics to semisynthetics, will be solved by an increased consumption. Also, in some cases, with a problem with the caps, it can throw oil into the air filter.

Some car enthusiasts observe another problem when oil appears in candle wells or even on the surface. valve cover... This indicates wear on the spark plug well o-rings.

We order rings according to the article number 2244323001 for subsequent replacement. At the same time, do not forget to order the valve cover gasket 2244126020. Since when eliminating this malfunction, the cover will need to be dismantled.

Video

With a timely oil change in Hyundai, you can forget about engine breakdowns in your car. Timely maintenance will reduce the cost of repairing the machine. You can change the engine fluid yourself if it runs out warranty period, or contact the service station. It is also important to choose the right mixture according to the characteristics of the vehicle.

Which liquid to choose

• : Premium DPF,
• Turbo SYN,
• 50Super Extra,
• Premium LS,
• 5w20: Premium.

The composition of these mixtures allows you to increase the service life of the engine and reduce fuel consumption.

The manufacturer Hyundai Accent does not tie motors to a specific line of mixtures and provides motorists with a choice.

Determine the amount of mixture for pouring

The volume of oil poured into the Hyundai Accent engine is an important indicator. Not enough fluid will damage the engine, too a large number of - extrusion of seals and oil seals, the level of combustion of additives increases, the efficiency of catalysts decreases. How much liquid you need to fill can be found in the technical documentation that comes with the car. On average, a complete replacement uses about four liters.

Step-by-step instructions for replacing

Changing the engine oil in a hyundai accent engine should be done regularly. The official recommendation is that replacement should be carried out every 10-15 thousand kilometers, in fact, this is done more often. This is due to the fact that the tests take into account the almost ideal conditions of the climate, roads, etc. In practice, such conditions are difficult to find. The following factors affect the reduction in the service life of the mixture:

• Temperature drops;
• Aggressive driving style;
• Car overload;
• Bad roads and poor quality fuel;
• Violation of the speed limit;
• Staying in traffic jams, etc.

You need to change the mixture approximately every 10-15 thousand kilometers, or once or twice a year.

Required tools

You will need the following:

• Engine fluid - recommended by the manufacturer;
• Empty container - for draining mining;
• New oil filter;
• Key head 17 and 19 sizes;
• Rags.

After the preparatory work, you can start the replacement process. The whole process is divided into several stages.

1. Waste drain;
2. Filter change;
3. Filling in new oil.

In order to avoid mistakes, it is necessary to consistently perform all the actions to change the oil in the Hyundai Accent engine.

1. Install the car on a viewing hole or overpass
2. Warm up the motor
3. After unscrewing the oil filler plug, wipe it off with a cloth to remove dirt
4. Substitute an empty waste canister
5. The mining should be drained after unscrewing the drain bolt, you need to be extremely careful not to get burned, it can be hot and burn the skin
6. Unscrew and install a new oil filter. Before installing it, fill it with oil and wipe the O-ring.
7. Place a new sealing washer on the drain bolt and tighten. Do not overtighten the drain bolt - you could strip the threads
8. Fill with engine mixture. The required oil level can be checked on the dipstick
9. Warm up the engine and check the oil level again. If the level is insufficient, top up with engine fluid

Drain plug and filter

Remember, along with replacing the engine mixture, you must also change the filter

Many car owners underestimate the importance of plug replacement drain hole... If you use an old plug, a leak is possible, and, accordingly, oil consumption, which can lead to unpleasant consequences. When replacing the plug, it is imperative to install a sealing washer.

After you have changed the engine fluid, check the oil level after 2-3 days. The presence of spots under the car indicates a violation of the tightness of the oil pan. The filter or plug must be tightened. Then the oil change can be considered complete.

The engine is the “heart of the car”. He needs constant care and requires the use of quality consumables. If you pay close attention to your car and replace the necessary consumables in a timely manner, it will last much longer.

When to change the oil

Changing the engine oil is provided in the range from 10,000 to 15,000 km. mileage or during the replacement time interval, which is 6 months. In large metropolitan areas, these intervals are shorter, and more frequent replacement is required, this is due to the short duration of trips, constant traffic jams and the operation of the engine at the same time. idling, these and other factors lead to the rapid development of engine oil of its resource.

City dweller, owner hyundai car It is better for Accent to replace the engine oil and filter when the mileage is 8-10 thousand km, the same replacement recommendations apply to the inhabitants of hilly areas or when constantly driving on dirt roads. If you own a used car with a significant mileage, stick to the above intervals.

Oil change

1. Before proceeding to change the engine oil, the car engine must be warmed up, it is better to first train, but you can also let it idle.
2. Drive the car into a hole or lift it onto a lift, turn off the engine. Unscrew the oil filler cap on the engine cover.
3. Remove the pallet protection, if any. Prepare a container for draining used oil, place it under the hole and unscrew the drain plug located on the pallet.
4. Drain the old oil and look at its condition, it should not contain metal shavings and sawdust. When all the oil is drained, wipe the plug dry and screw it back on.
5. Move the container with the old oil under the oil filter. It is usually located to the left, closer to the top edge of the engine. Two types of oil filters were installed on Hyundai Accent cars, this is a non-separable metal and, separately replaceable, replaceable element. Consider removing two options.
6. If the filter is screw-on, non-separable, then:
   • Take the key and unscrew the filter (counterclockwise);
   • Wipe dry the seat on the block with a cloth;
   • Compare the new oil filter with the old one, they must be the same type and size;
   • Lubricate the gasket on the new filter with engine oil and screw it onto the block. Screw on the filter tightly, tighten if necessary, oil should not leak through the gasket.
7. If a replacement filter element is installed:
   • On the filter element housing, unscrew the cover fixing bolt and remove it;
   • Take out the replacement element and compare it with the purchased one, they should be completely the same;
   • Wipe everything and replace the o-rings, after having lubricated them with engine oil.
8. Fill in new oil, wait ten minutes, check the oil level with the dipstick, if it is sufficient, you can screw the filler cap.
9. Start the engine and see if the plug and filter are tightly tightened, you can drive a little car. If a leak appears, stop, stop the engine and tighten the filter and plug.
10. Look under the hood again and check the oil level; if necessary, add it to the required mark.

Video

Good to know

If you yourself choose to replace the oil for a Hyundai Accent car, then you need to remember the manufacturer's recommendations and requirements for oil quality. There are two types of motor oils:

• Mineral - its viscosity will be directly influenced by temperature conditions.
• Synthetic - capable of working in a wide range of temperatures, has a uniform consistency and stable properties.

To change the engine oil, you will need to know the fill volume. Otherwise, the oil can be overfilled or overflowed. If the oil level is not enough, this will lead to early engine wear, and if you pour too much, it can lead to extruded oil seals and seals. When oil overflows, the level of its combustion in the cylinder increases, which leads to the deposition of unburned components from the additive package on the surfaces particulate filter and catalyst, thereby reducing their efficiency and significantly reducing their service life. Information on the volume of filling can be obtained by consulting with a specialist in a car dealership, when buying oil, consulting with friends or discussing on the forum on the Internet, as well as looking in the service book of a Hyundai Accent car.

When the oil filter is replaced, it is necessary to lubricate the O-rings with clean engine oil, otherwise it will not swell and there will not be enough tight pressing against the seat, which will lead to oil leakage from under the filter. Dripping oil may fall on the hot exhaust manifold pipe, and this may result in a fire. In addition, when replacing the filter, drop a few drops of oil into it and, be sure, after changing the oil, let the engine run a little, while checking the pressure and level.

When screwing on the drain plug on the oil pan, do not apply too much force, if you overtighten it, you can break the threads. Take care in advance of purchasing a copper ring for the drain plug, it is disposable and must be replaced every time you unscrew the drain plug on the pallet. Otherwise, the system may be leaking or the plug may simply unscrew.

Engine oil

Any car enthusiast knows that it is not worth postponing the replacement of engine oil in the engine. In the used oil, carbon deposits, combustion products and wear of parts accumulate, the additives decompose and the level of viscosity decreases, which leads to quick wear and, as a consequence, the failure of the entire engine. The oil that has worked out its life does not fulfill the functions assigned to it to reduce the friction of contacting surfaces and remove heat.

An unambiguous answer to the question: "How often should the engine oil be changed?" no. There are only recommended replacement intervals, which are prescribed in the service books and set by the oil manufacturers, and you should pay attention to them.

The engine oil change interval for a Hyundai Accent will be influenced by its operating conditions. Everything will depend on the weather and road conditions, as well as the intensity of daily loads to which the car will be subjected. The climatic zone for which the vehicle was manufactured also significantly affects the interval between oil changes.

As you know, the higher the indicators of the oil quality level, the longer it will last and the less often it will require replacement. To understand when you need to change the engine oil for your car, you should refer to the manufacturer's recommendations prescribed in the service book. Consider the individual conditions under which you operate your Hyundai. Do not forget about the seasonal periods when it is simply necessary to change the oil, taking into account the temperature indicators of the upcoming season.

In order to replace the lubricant in your car, it is enough to contact the service station for help, or you can do this procedure yourself. If the driver nevertheless decides to use the services of a service station specialist, this choice will be the most optimal, since the master has an excellent approach to any car. But one day there will be a need for self-replacement oil, therefore it is necessary to consider how correctly, what and how much oil must be poured into the TAGAZ Hyundai Accent engine.

How to understand what kind of oil you need Hyundai Accent?

All products in this category have a special coding that corresponds to the parameters of vehicle use. The encoding has a mask, for example 5w-20. To choose the right oil for a Hyundai accent, you need to fully understand this encoding.

The first digit in this value is an indicator of cranking and pumping ability when using the car at the lowest possible temperature. This value fully characterizes the starting temperature of the motor. If the indicator is indicated even lower, then the starting temperature of the motor will be even lower.

The second number after the letter is an indicator of the maximum viscosity of the liquid at the normal operating temperature of the engine of 100 degrees and the minimum viscosity at 150 degrees. These temperatures are considered the maximum for the motor to operate. If it operates at the maximum available temperature of 100 degrees, while the viscosity car oil goes down to the very low level, the greatest fuel economy is achieved in the car, the engine power increases.

It is important to remember that the low viscosity of the grease can lead to destruction or even slight damage to the engine, as it covers the surface with a small thin layer.

Manufacturers always indicate what kind of lubricant must be poured into the engine of a particular machine. But these recommendations can be customized for yourself, since they are recommended, but not required. The correction takes place at the level of the viscosity calculation at the lowest air temperature. If we take into account the changeable weather and climate of the territory of the country, the values \u200b\u200bof 0W, 5W, 10W are usually determined for the brand of such a machine. The Hyundai Accent engine is designed to use the most viscous oils, so 5w-40 is considered the optimal coding for such an engine.

What kind of oil should you fill? The manufacturer has identified three brands:

• Liqui moly;
• Aral;
• Mannol.

The oil for Hyundai Accent should be used during the initial break-in phase before normal vehicle operation. Actually, the engine itself is run in and at this moment it is necessary to adhere to all recommendations from the manufacturer.

Running in should be treated with special responsibility, because the result of this process determines its further fate and performance characteristics engine. This process averages 6,000 km. For the period of the first 6000 km, the car owner should not exceed the speed and allow the engine to overheat.

Fill the engine only with the oil that was used during the break-in. If the oil is changed to another, it can lead to an expensive car repair. What kind of oil you need to pour will be determined at the purchase stage. When driving, pay attention to oil consumption. In an accent with mileage, noises can be heard, which means that its consumption has increased.

It is important to remember that excess oil must be drained and the engine must not be refilled. If the engine runs smoothly, does not make any noise, and the machine itself moves smoothly, then you need to adhere to this oil level.

The Hyundai engine requires changing its fluid in Russia both in winter and in summer. In a warmer climate, this need is partially eliminated, but in Russia, replacement is mandatory twice a year. It is also important to pay special attention to quality, you do not need to save on this, since further repairs will cost many times more.

How is the oil changed in such a car?

Hyundai Accent, as previously mentioned, requires an oil change every six months, depending on the season. But, it is worth considering that the replacement must be performed for every 10 or 15 thousand run. Residents of a large city need to do this every 8 or 10 thousand runs.

In order to change the oil, you will need the following tools:

• the oil itself, 4 liters;
• oil filter;
• drain plug;
• keys for promotion - 17 and 19;
• a separate wrench for untwisting the oil filter;
• set of torcs.

How is oil drained and filled?

Draining is carried out in stages, namely:

1. Before the replacement itself, you need to drive the car a little to warm up the engine;
2. The car drives in and is installed on a lift, the ignition is turned off;
3. The filler plug is removed where the filler grease is installed;
4. You will need a container for further draining, you need to put it next to it;
5. The drain plug is unscrewed, the protection, if any, is removed;
6. When draining old oil, you need to pay attention to whether there is anything superfluous in it;
7. After draining all the liquid from the reservoir, you need to screw on a new drain plug;
8. Replace the oil filter.

The oil must be poured carefully so that nothing spills outside the neck. In order to prevent anything bad from happening, use a watering can. If a watering can is not available, motorists are accustomed to substituting the neck of a plastic bottle as an alternative.

After the oil is filled, you need to start the car for a few minutes. If the oil remains at the same level, then its volume will be enough for the engine, and if it was noticed that there was less oil after such a procedure, add the required amount.

At the end, you can again emphasize the importance timely replacement liquids. It is also worth remembering that it does not change immediately after running-in, and the running-in itself must also be performed in full, so that in the future it is not spent on expensive repairs. It must be changed twice a year and monitor the engine noise immediately after replacing it in order to determine the appropriate fluid level for it and prevent both overflow and underfilling.

Video: do-it-yourself oil change in a Hyundai Accent engine

Engine oil must be replaced every 10,000 km.
For a new car, it is necessary to change the oil after the end of the running-in (after 2500 km). When changing the oil, it is imperative to install a new oil filter (engine ZMZ – 4062) or its filter element (all engines). Oil change procedure see subsections 2.3.2, 2.3.2.2 and 2.3.3.3 .

Into the crankcase it is recommended to fill in oil of the same brand as was in the engine. If another brand of oil is poured, you must first flush the engine lubrication system with the oil of the same brand that will be poured into the engine. To do this, drain the old oil, fill in new oil 2–4 mm above the "0" mark on the oil level indicator (dipstick). Start the engine and let it idle for about 10 minutes. Then drain the oil, replace the oil filter or its filter element and add fresh oil.

Coolant must be changed once every 2 years or after 60,000 km (whichever comes first). Coolant replacement procedure see subsection 2.4.4... It should be borne in mind that the coolant is poisonous, so it should not be sucked in by mouth when transfusing. It is recommended to wear protective goggles when working with coolant and not to smoke or eat. If liquid comes into contact with exposed skin, wash with soap and water.

Gearbox oil must be replaced after 60,000 km. Oil change procedure see subsections 3.3.2 and 3.4.2 ... Every 20,000 km, check the oil level in the transmission and top up if necessary. The oil level in the crankcase must reach the edge of the filler hole. If the drained oil contains metal particles or is very dirty, flush the box. To do this, pour 0.9 liters of fresh oil into its crankcase. Jack up the rear of the vehicle. Start the engine and, engaging first gear, let it run for 2-3 minutes. Then drain the oil and refill with fresh oil. When checking the oil level, you need to clean the surface of the breather from dirt and turn its cap several times to remove any dirt that has got under it.

Crankcase oil rear axle must be changed after 60,000 km. The oil is changed in the same way as in the gearbox. After 20,000 km, check the oil level in the crankcase and top up if necessary. The oil level should be up to the edge of the filler hole. When checking the oil level, the breather must be cleaned of dirt in the same way as was done for the gearbox.

Do not use re-drained brake fluid.

Brake fluid the clutch and brake drives must be replaced every 2 years, regardless of the vehicle mileage. Brake fluids used in clutch and brake drives domestic production “Rosa”, “Rosa-3”, “Tom”, “Neva” or their foreign counterparts on a non-oil basis, the quality level of which is not lower than DOT-3. Use other brands of fluids, especially petroleum based fluids, prohibited.

Brake fluid is hygroscopic and cannot be stored in an open container.

The procedure for replacing the brake fluid is as follows:

1. Remove the brake master cylinder reservoir cover.

2. Remove the rubber protective caps from the air release valves on the wheel cylinders and put rubber hoses on the valves, the ends of which are lowered into glass containers.

3. Unscrew the valves no more than one turn and, pressing the brake pedal all the way down, drain the fluid. As the flow of fluid from the hoses stops, tighten the air release valves.

4. Pour the drained brake fluid from the vessels and put them in place.

5. Pour fresh fluid into the master cylinder reservoir, unscrew all air release valves one turn and, pressing the brake pedal all the way, fill the brake system. In this case, it is necessary to constantly add fluid to the master cylinder reservoir. After the hoses on the air release valves begin to flow clean brake fluid, screw on the valves.

6. Bleed the brake system to remove air from it ( see subsection 6.9).

7. Close the brake master cylinder reservoir with a plug. Remove hoses from air release valves and put protective caps on them.

In the same way, replace the fluid in the clutch hydraulic drive.