The first and, perhaps, the most important difference between personal and public transport is the degree of comfort of the driver and passengers. And even cars on this parameter differ significantly from each other. In our review of the 10 most comfortable cars in which you feel "at home".

1. Audi A6 Premium Plus

Audi car The A6 Premium Plus has garnered many accolades, primarily for the good soundproofing of the interior. The driver does not actually hear any external noise. Special mention should be made of the front seats, which were designed for long-term driving and have a lot of different settings.

2. Buick LaCrosse CSX

Not the best stuffing in terms of ride quality, however, despite this, the Buick LaCrosse CSX is one of the most comfortable cars. And it's all thanks low level noise and comfortable interior. In addition to this, the car is quite stylish. Some experts say that this is a car the best choice for retirees.

3. Chevrolet Impala 2LTZ

Chevrolet car Impala 2LTZ is almost a luxury. Praise and love this car for its soft front seats, and for their convenient location in the cabin. The seats are so comfortable that the driver and front passenger can "fall apart" in front of the passenger compartment, just like on rear seats.

4. Chrysler 300 V6

The quiet and comfortable Chrysler 300 V6 clearly demonstrates what the "old school" is worth. The car conquers not only with its interior, but also with incredibly wide functionality that allows you to meet the most varied needs of the driver and passengers.

5. Ford Fusion Titanium

Ford fusion Titanium - beautiful family car with good trim. It will be very comfortable to ride it, both long and short distances.

6. Lexus ES 350

For several years, the Lexus ES 350 has remained one of the best vehicles on the market. Things like wind, extraneous noise, engine hum do not bother the driver at all. The car seats are comfortable enough. When driving, the Lexus ES 350 runs smoothly and smoothly, which is also important in terms of comfort.

7. Lexus LS 460L

Another example of excellent external noise absorption is the Lexus LS 460L. This car deserves special praise for its damping system, which makes it feel good even on the most disgusting roads.

8. Mercedes-Benz E350

There is nothing exceptional in technical terms in the Mercedes-Benz E350, but the car can boast comfortable salon and wide functionality. High noise absorption and reliable interior insulation also fall into the piggy bank of pluses.

9. Mercedes-Benz GL350

The words "SUV" and "comfort" are very compatible, at least when it comes to the Mercedes-Benz GL350. This car is not only comfortable, but also very roomy. It can accommodate up to 7 people, which is especially useful when going outdoors with friends or family.

10. Mercedes-Benz S550

The suspension system of the Mercedes-Benz S550 virtually multiplies any "road traffic injuries" by zero. In its class, this is perhaps best car in the matter of comfort, since unlike most other contenders, the car combines all the advantages of a car salon - from comfortable seats to reliable sound insulation.

However, some drivers are very pragmatic about the car and appreciate the opportunity to save more comfort. They should pay attention to.

What is needed to do the tuning of the salon with your own hands, for this, first of all, you need design skill, the ability to work with your hands, as well as time, money and a little patience. Although no, most likely, more patience will be needed, firstly, this is very painstaking work and not everyone can get what he hopes for, and secondly, this must be taken into account, the prices for materials are very high, so you need to be completely confident in your abilities that you will succeed. Only if all these conditions are met, you can start tuning the salon with your own hands with complete confidence.

If you want to remodel the seat upholstery, there is nothing difficult about it, you need to dismantle the seat, remove the old upholstery from it, cut at the seams, and, using it as a pattern, cut out the new upholstery for your refurbished seats. Now it is worth choosing the material for your new seats, when you do the tuning of the salon with your own hands, it is worth considering that very thick leather is not suitable, since it will create discomfort during a long journey, and too soft cannot be used either, because it can be easily damage either with a heel or a screwdriver.

What you really need is tender beef skin, which is finished in such a way that its softness fits nicely to the body, so if you are planning to do the tuning of the salon with your own hands, it will be just right for you. Before sheathing the seats with new leather, we advise you to upgrade the heating of your seats, as well as install, at least on the driver's seat, vibration massage, this will brighten up your move and will not let your back get tired during a long stay at the wheel.

Everyone has an individual taste, and the desire to tune everything to suit him is quite natural. Our personal transport is no exception, so tuning the car's interior is very popular with many owners.

Tuning inside the car: where to start?

Sure, appearance cars are of great importance, but both the driver and passengers spend most of their time in the cabin. Thus, there is a need to provide more comfort through the improvement and comprehensive refinement of the entire car. In addition, the combination of appearance is also important. vehicle from his technical equipment... This is what is called tuning.

At the same time, reincarnation can be very different character, and no one can accurately calculate the item of expenditure on it. Indeed, for some motorists, it will be enough to install some kind of sports accessory in the cabin, for example, a steering wheel. And for others it is important to completely replay the style and design of their "iron horse". In the latter case, of course, it is unlikely that it will be possible to limit oneself to one's own efforts and will have to turn to professionals. So the material costs will be much higher.

Car interior tuning - choose a method

Today, there are several main types of tuning, and the most popular among them is flocking, which implies the creation of a velvet surface. The first cars with a similar design were created in the United States, but over time, Switzerland took the reins of power from the Americans, and now it is she who is leading in this area.

It is also worth paying attention to the carbon fiber trim. This fabric is made of carbon fiber and has an epoxy resin top. Its main advantages include an impeccable appearance, excellent strength characteristics, despite its rather low weight, and the ability to create a unique interior, since with its help you can easily recreate any pattern.

In addition, you can add zest to your personal vehicle, while emphasizing all its significance and solidity, by veneering. Such a finish will speak of the owner's impeccable taste, because natural wood has always been, is and will be in the price. True, it is almost impossible to carry out such work on your own, unless, of course, you are a furniture master. You can make an impression on the passengers with an original one, but even here you have to work hard.

We make a unique tuning of the dashboard ourselves

Basically, make good quality tuning dashboard and car dealership is possible in specialized firms. But if there is a desire to personally take part in the creation of the design of your transport, then there is no problem in carrying out this procedure yourself. At the same time, you will be able to significantly save your money, because the services of professionals are not cheap pleasure.

You will need the following tool: a flock machine, a primer for a car, a color scheme, a paint brush and, of course, the special composition itself. After collecting all of the above items, you can start taking action. First of all, you should remove the part to be restored and pull it out of the passenger compartment. At the same time, immediately think about how it will get up back, because after tuning it cannot be bent in any case... Then, having cleaned the surface, cover it with three layers of soil, while each layer should dry thoroughly.

In order for the velvet layer to be even as a result, the surface should be thoroughly polished before applying all of the above.

After completing all the preparatory work, you can freely proceed directly to the flocking itself, for this you need to carefully read the instructions attached to the device. Usually, before this, a layer of glue is also applied to the surface, and then it is already processed with a machine. Those particles that have not adhered are blown away by a hairdryer, but only with cold air. And the layers need to be dried in natural conditions in a well-heated room.

As for the carbon fiber trim, everything is as easy as shelling pears in this matter. The main thing is to thoroughly clean the surface of the workpiece and apply a base layer to it. Remember that it must dry for at least two and a half hours. During this time, the resin should go into such a state that when touched it sticks, but no traces remain. Next, carefully apply the carbon fabric. Its edges need to be cut a little with a margin and, bending them, attach with masking tape. Then let the parts dry for six hours.

Tuning is a common concept among owners domestic models Vehicle. Such cars are distinguished by a budget interior, which is not particularly comfortable and perfect. Budget panels and not-so-comfortable seats depress the driver while driving.

If you want to create additional comfort in the car or emphasize your status, then you can make a tuning of the salon

Of course, you can turn to professionals who can tune the interior of the vehicle, taking into account your wishes and modern design solutions, however, this pleasure will not be very cheap. If you have the opportunity, free time and desire, then you can do the tuning yourself, without the help of specialists and at the same time save cash... Consider in this article how to make tuning.

Do-it-yourself car soundproofing

Modernization of the vehicle's interior includes a huge number of changes. Before starting work, it is important to understand what kind of result you want to achieve, it will be determined with colors interior. This will help you figure it out for the job. If you are the owner domestic car and you want to make a complete tuning of the car's interior, then, according to the advice of experts, you need to start working with noise isolation and vibration isolation of the cabin.

To do this, you need to purchase insulation materials in special stores. It is necessary to start work with a complete disassembly of the cabin, cleaning it from dust and dirt. Remnants of old upholstery are completely removed from the interior. To obtain a high-quality result, it is necessary to initially glue vibration-insulating material in one or two layers, which will reduce the vibration level in the car while driving. The next step will be gluing the soundproofing material in one or two layers. This will reduce the level of noise and squeak in the car while driving. It is necessary to glue the material over the entire inner surface of the passenger compartment, pay special attention to hard-to-reach places. To improve the result, you can walk with a hair dryer to heat shrink the materials.

Then you can start assembling the cabin. For a tighter fit of the cladding elements, seals are used. If you are going to tune the interior trim, then it will be easier for you to cope with this task disassembled and put the already tuned elements in place.

Tuning smooth surfaces of the car interior with your own hands

Most often, the interior smooth parts of the car are made of cheap plastic and have no presentable view... Upgrade a torpedo, door cards and other plastic elements in several ways.

The easiest way to tune the interior of a car is pasting products with carbon or vinyl film like carbon. This is not a very time-consuming process, although it requires utmost care, careful measurement of details. The film is glued quite simply: you need to clean and degrease the surface to be treated, glue the film, straightening it from the center to the edges of the part using a spatula with a soft tip. For a tighter fit, heat treatment must be carried out in parallel with a hair dryer. It is more convenient to do this work together. Carbon film is sold in different colors, therefore you can combine colors for more original look... For example, highlight the handles of a vehicle or a torpedo with a different shade and in an individual style. It all depends on the flight of your imagination.

A more expensive option for tuning a car's interior is trimming interior elements with leather or Alcantara - artificial suede. Padding a vehicle interior with leather is very expensive. This requires a special automotive leather that is resistant to fire, is durable and durable. A little more economical is the option of restraining parts with the help of faux suede, which gives the interior comfort and warmth. Working with such materials requires a lot of diligence and care and can take a week or more.

If you are tired of your ugly smooth plastic surfaces, then you can always replace them with leather or rare wood species

The most economical and popular option for tuning smooth interior surfaces is flocking. This is a way of decorating a car interior with your own hands using flock - chemically treated textiles. Before flocking, it is necessary to degrease the surface of the product, work it out with a primer and fine sandpaper. The next step is to apply a uniform layer of glue and flock the surface. To do this, it is advisable to have a flokator - a machine for applying it, which in the shortest possible time will help you cope with the task in even hard-to-reach places. Excess material is blown away with a hair dryer. Parts are left to dry for several hours. You get interior elements that have a pleasant-to-the-touch fabric effect, fade-resistant and wet-wipe-resistant, and add personality and comfort to your car.

DIY car ceiling tuning

An important point in the full tuning of the salon is modernization. Most often, manufacturers produce cars with white cladding on the ceiling. And no matter how the owner takes care of his car, over time the ceiling burns out and fades, acquires a reddish tint. Carpet is most often used to stretch the ceiling - an inexpensive and common material.

It is necessary to start the modernization by removing the headliner, it is advisable to do this carefully in order to use it for cutting out of new material. Next, you should clean and degrease the ceiling and fix the prepared pattern on it using standard clamps. For reliability, you can pre-work the ceiling with glue. This will ensure a more secure fit.

Flocking can also be used for the ceiling to give a more presentable look.

DIY car seat upgrade

Tuning car seats is an important part of modernizing the vehicle interior. In order to improve the appearance of the seats, you can buy new car covers and thus transform them. And also to improve the look of your car, you can replace the old seats with seats from a good foreign car.

If you want to get a truly unique result, then it is better to do the hauling of the car seats with your own hands.

Most often, eco-leather is used for constriction. This is not a very expensive material that has good elasticity and a presentable appearance. Of more expensive options - production of covers from automotive leather and alcantara. These materials have a longer service life.

Having decided on the material and its color, you can start working. Always remove from the vehicle before trimming the seat. It is very carefully necessary to remove the trim from the seats, since it will serve you as a pattern, then you need to make a markup with a marker and old car covers on a new material and cut out all the elements of the pattern. FROM inside foam rubber is glued.

To give a more dignified look to your car seats, try leather-tightening and embroidering beautiful designs

It remains only to sew the prepared elements using strong reinforced threads. In order for the car covers to have a presentable look, it is necessary to straighten the inner seams, cut off the foam rubber from them and glue them with ordinary glue. After drying, the covers are steamed with a hair dryer or iron and put on the seats.

And a few more important points

Almost all elements of the car's interior have undergone tuning upgrades. There are only a few details left that will make your car interior unique.

For a more efficient look, it is necessary to improve the steering wheel of the car. A more presentable look can be given by covering it with automotive leather. The tuned steering wheel will look more expensive, it will become more pleasant to the touch, and thanks to the car leather that breathes, your hands will not sweat and slip on the steering wheel.

And also the look of the tuned interior can be spoiled by old factory rugs, which look unpresentable and pathetic. Car rugs can either buy new ones that you like, or you can make them yourself from rubberized carpet. This will be an ideal solution to the issue, you can choose a color and quality that will fully fit into the interior of your renovated salon. To do this, we use an old rug instead of a model and cut out tuning mats for our car according to its size.

Alternatively, you can add personality to the cabin with additional lighting elements. LED strips on dashboards and dashboards can be a stylish accessory for your car.

Let's sum up

As you can see, tuning the salon with your own hands is a real task. You can decorate all the elements of the car interior without exception. Come up with your individual style and interior and act. This will give you a lot of positive emotions and envy of others.

The American popular magazine Ward's Auto revealed its 2014. The top ten was selected from 41 new car models. Considering how much time we have become in our cars, we think many of us will be interested to know which cars in 2014, the interiors are the most beautiful.

Let us recall that the publication annually awards various awards to cars for some achievements. The world's most famous publication competitions are "Top-10 best engines"and" Top 10 best automotive interiors".

How do experts and journalists of the publication choose the best car interiors?

In order to select the top ten, the best cars are selected from the cars admitted to the competition according to the following criteria: ergonomics, ease of perception, quality and style of decoration, materials used in the cabin, cost of a car, safety, comfort, design harmony, etc.

We invite you to familiarize yourself with this top ten cars with the best interiors... This year's ranking includes a variety of cars ranging from cheap affordable cars to luxury Rolls-royce wraith.

What does the interior mean for the driver and for the brand?

In every car model, the interior plays an important role in the perception car brand consumers. Also, the interior creates the character and character of the car in the minds of buyers. The more beautiful and more comfortable interior, the more there are those who want to buy a car. Massage seats, expensive interior materials and various autonomous functions while driving distinguish the cars featured in this ranking in 2014 compared to.

Cars with the best interiors

2014 Kia \u200b\u200bSoul +

The second generation won the prestigious annual competition for comfort, space, ergonomics and, of course, for the inexpensive cost of the new car. The highest marks for quality were given to features such as an 8-inch navigation display, rear-view cameras, a roof with a panoramic view and an excellent audio system.

2014 Mazda3

The new generation became the only one Japanese car, which got into the top ten of the best cars. The jury of the competition came to the conclusion that new Mazda, in spite of the not expensive factory price, has a chic sporty functional interior with elements of a premium car. It's worth noting that in the car market, an entry-level model rarely gets expensive finishes and a lot of expensive features. Mazda3 is an exception to the rule. The interior of this car is graceful and beautiful, thanks to the luxurious digital gadgets such as the central LCD screen that controls the infotainment system and many modern innovative safety features.

2015 Volkswagen GTI

2014 Rolls-Royce Wraith

Rounding out our top ten best car interiors is expensive luxury rolls-Royce car Wraith (Phantom). This car is worth more than the top eight cars in the ranking combined. Compared to previous interiors, the salon has received a new design direction, taking into account modern fashion trends and the preferences of wealthy citizens. A high youthful energy emanates from the new style of the salon, which will appeal to the young generation of wealthy people.