Car: Hyundai Solaris. Asks

: Smirnov Kirill. Essence of the question: How to reset the "CHECK"?

Hello! I have a Hyundai Solaris, and the "check" is constantly on! I already went to the station maintenance and found out what the problem was. The first time they threw it to me, and now it appears again, while the behavior of the car has not changed in any way. Please tell me how I can reset it myself, because I don't want to pay for it again in the service.

Diagnostics and removal of errors that occur on Hyundai Solaris may be needed by the vehicle owner in various situations when there is no desire to do this work in a certified service center.

It is not difficult to do this work, the main thing is to know what you can remove yourself errors related to the first level , that is, those that are not recorded in the ECU memory, which do not significantly affect the operation of the car and its devices. Because only a special dealer device (scanner - approx.) Can remove such errors, one of these errors is an error in the car's airbags.

When are errors removed on their own?

Among all the important malfunctions on the Hyundai Solaris, some can be reset on their own after carrying out one or another repair.

So for example error codes with 301 by 304 , talking about a spark in one of the cylinders (the last digit of the error refers specifically to the cylinder - approx.).

Accordingly, when these gaps are detected, the ECU will give a signal in the form of a burning "CHECK", which cannot be removed without erasing the code or resetting the terminal from the battery.

This error is completely removed, only by replacing the non-working candle with a new one, after which the error will disappear by itself.

Self-dumping of a check on Hyundai Solaris

It is possible to reset errors on your own on Hyundai Solaris thanks to the OBD-II protocol and the presence of a special adapter with a diagnostic device, be it a smartphone or a computer that supports Bluetooth wireless technology.

In order to check errors on the car, we perform the following steps:

Diagnostic and error reset process without OBD-II

On Hyundai Solaris, you can diagnose and remove errors without even having any additional devices at hand.

Diagnostics (this method does not work)

The method described below runs all over the Internet. We checked on our editorial machine. He does not work. We cannot delete the method, as some owners may think that it works.

Rebuttal on video:

Removing errors

• In order to remove the error, it is necessary to do the entire above-mentioned course of work from 1 to 5 points, and without turning off the ignition, press the "gas" again.
• After that, turn off and turn on the ignition, start the engine.
• If the progress of the work was done correctly, the error should be removed.

As you could see for yourself, there is nothing difficult in removing the error on Hyundai Solaris yourself, no.

In the video, the check is burning and the Hyundai Solaris stalls

If on dashboard your car, the Check engine indicator light is on (or simply the "check" is on), you should at least be on your guard. The reasons for this can be very varied - from a loose gas cap to serious engine problems.

What does the Check engine indicator mean

The name of the Check engine indicator literally translates as "Check the engine". However, the engine, when the light comes on or flashes, may have nothing to do with it. A lit indicator may indicate a problem in the fuel supply system, failure individual elements ignition, etc.

Sometimes this can be a very minor problem - for example, a loose fuel cap or a catalyst malfunction. Nevertheless, it is impossible to ignore the indicator signals in any case, as this can result in serious problems.

Sometimes bad fuel quality can be the reason for the indicator to light up. So do not be surprised if, after refueling at an unfamiliar gas station, you see the Check engine light flashing.

Usually the indicator is located on the dashboard of the car under the engine speed indicator. It is indicated by a schematic engine or a rectangle labeled Check engine or simply Check. In some cases, instead of an inscription, a lightning symbol is depicted.

Is it possible to continue driving when the light is on

Worn out brake pads, the time has come for the next maintenance, the speed is incorrectly switched, poor quality fuel is used, the voltage of the on-board network has dropped - all this can become a reason for the Check indicator to light up. First of all, you should check the motor. If the alarm is caused by engine faults, it is dangerous to continue driving.

The problem is aggravated by the fact that it is impossible to independently determine the malfunction of a modern internal combustion engine by smell or color. You should contact a professional who, using a scanner, will identify a malfunction, if, of course, there is one.

A lit Check light may indicate various breakdowns - it is better not to ignore it

Therefore, if after restarting the car, the light does not go out, you can only drive to the nearest car service. They will conduct a comprehensive diagnosis of the engine and its systems.

Operation of a car with a lit Check engine icon leads to increased consumption fuel, unstable engine operation, reduced traction characteristics of the vehicle. Moreover, in this case, the car owner may lose the car repair warranty.

Why the light bulb came on and how to fix it

The main situations in which the indicator lights up, and the recommended options for the motorist's actions:

1. If the Check engine lights up when the car is started and immediately goes out, there is no damage to the engine. The reason for the fire is most likely harmless - the loss of the fuel tank cap or its not twisting. It is enough to wrap it tightly and check if the warning has disappeared.
2. If the indicator lights up while driving, stop and check the wires. You may find a cable hanging under the hood or an open battery terminal. This applies to everything attachments - wires, hoses, etc.
3. If the lamp flashes while driving, stop and check the sounds made by the engine, pay attention to the oil level, inspect the side parts of the engine. If no visually obvious violations are found, it is recommended to drive to the nearest car service and carry out diagnostics.
4. If the engine is running normally and the Check light is flashing continuously, it is most likely an ignition failure. You should check the candles and the coil, pay attention to the quality of the fuel. To do this, it is better to contact the nearest autodiagnostic center.
5. If the indicator is constantly on, you must stop, unscrew the candles and check the gap. Gaps that exceed 1.3 may cause the light bulb to come on.
6. In addition, when the "check" is lit, the ignition is usually checked. In any car service there are special testers that allow you to determine the deterioration of the insulation of the wiring.
7. The cause of the light bulb may also be faulty. fuel pump... You should stop and listen to the sounds from the gas pump. Smooth humming without clicks and pauses is considered normal. If appear extraneous sounds, the pump should be dismantled, rinsed from the inside and the filter cleaned.
8. A serious engine malfunction may be indicated by the coolant temperature. If it is above 85–90 degrees, and the Check engine lights up when driving, the engine is definitely faulty. In this case, it is advisable to call a tow truck or drive at low speed to the nearest car service.

We have already noted that Check lights up yellow or orange every time the engine is started. It is normal for the blinking to last no more than 3-4 seconds and stop along with the blinking of the other dashboard lights. Otherwise, follow the recommended steps above.

Video: Check sensor lights up

https://www.youtube.com/embed/uqdKfKX4MlE

Table: Causes of the Check Engine Light to Come On and Suggested Actions

When and in what cases the "check" is lit	Possible reasons	Suggested action
When driving, when accelerating	Sharp acceleration, faulty air filter	Change the filter, accelerate more smoothly
When the indicator blinks, the engine trips	Fuel in one of the cylinders does not burn completely, gasoline or burns out in exhaust pipe, or immediately enters the catalyst	Replace spark plugs, check coil and armored wires, check timing marks
After refueling	Poor fuel quality	Change gas station
When the ignition is turned on	Normal vehicle response	Shouldn't do anything
After washing the car, engine, after rain	Water has entered the Check engine wiring	Treat WD40, dry, clean contacts
On a cold engine	Knock sensor defective	Replace
On a hot engine	Faulty camshaft sensor	Replace
At high revs	Missing ignition coils or faulty crankshaft sensor	Replace coil or sensor
Idle	Sensor malfunction throttle	Replace
After replacing candles	"Lean" combustible mixture	Change the octane number of gasoline to a higher one
After replacing the air filter	More air began to flow, the composition of the exhaust changed, the lambda probe reacted	Stop the engine, start again
After replacing the timing belt	A terminal has jumped off a sensor, most likely D. of the air hose	Check terminals
After installing gas equipment	The petrol injector emulation is done incorrectly	Tune
After setting the alarm	Only one power line is connected to the turbo timer, the temperature sensor, brake pedals and mass air flow sensor hang on the second	Reset Check engine, connect both lines
After replacing the fuel filter	Low pressure filter installed	Replace filter
With a simultaneous increase in fuel consumption	Driving too long, warming up the oxygen tank, or poor-quality fuel	Refuel quality fuel, give the car a rest
With long climbs	Timing belt wear, sensor malfunction	Check and replace
After replacing the ignition module	Module connection problems	Remove and replace the positive terminal from the battery
At subzero temperatures	Throttle position sensor defective or disconnected	Replace the device or install the chip in place
When you press the accelerator pedal	Clogged air filter	Clean or replace filter

Resetting or zeroing the Check indicator

In most cases, as the table shows, Check lights up when a sensor fails or changes in vehicle operating conditions. However, even after diagnosing and eliminating the malfunction, the light sometimes remains on.

The point is that the "trace" of the error remains in the computer's memory. In this case, you should "reset" or "zero" the indicator readings. This can be easily done on your own by performing a number of simple operations:

The sensor is zeroed and the Check light is no longer lit. If this does not happen, contact the service center.

When the Check engine light on the dashboard comes on, it almost always requires the vehicle to stop immediately. Practical use of the recommendations given in the article will help you to avoid complicated and expensive engine repairs. Good luck on the road!

Many of us have faced such a problem as the inclusion of an indication of the engine icon (Check engine ...), the appearance of which scares car drivers. We offer you the 5 most common reasons why an engine check on the dashboard lights up.

The engine gauge icon usually appears without warning. The reason for the appearance of the Check engine cannot be immediately understood. Even if there is an auto diagnostics in the car (for example, in such cars as,), which scans all systems of the car for errors and, if any, displays a decryption on the information panel, the reasons for the appearance of the engine check will not be decrypted.

For most drivers, the appearance of this warning symbol on the instrument panel means that they urgently need to go to a car workshop to diagnose and eliminate the reason for which the engine check warning sign appeared. But in fact, in most cases, when the "Check" indication appears, it is possible, and in some cases, perhaps, to eliminate the cause on your own without a trip to a car service, which will save your money.

1. Replace the oxygen sensor (lambda probe)

The oxygen sensor in your car is part of the exhaust system exhaust gaseswhich controls how much oxygen is not burned out in the engine's combustion chamber. This sensor helps to monitor the fuel consumption of the vehicle. Malfunction oxygen sensor (lambda probe) means that car computer receives incorrect data, which can significantly increase fuel consumption and reduce engine power. Most cars have 2 to 4 oxygen sensors. If you have a home car scanner errors, then by connecting it to the car, you can easily find out which sensor needs to be replaced.

For what reason the oxygen sensor in the car becomes unusable: Over time, the sensor becomes covered with a layer of waste and engine oil (oily soot), which reduces the accuracy of the sensor readout for regulating the gasoline mixture and optimal distribution. A malfunction of the oxygen sensor in the car leads not only to, but also to an increased content of harmful substances CO2 in the exhaust.

What needs to be done: If you do not replace a faulty car oxygen sensor, this can lead to failure of your car's catalyst (may burst), which will result in costly repairs. The cost of new catalysts is very high due to the content of precious alloys in them. On some cars, there are several catalysts, the cost of which can go up to 90,000 rubles. So do not delay replacing the sensor. Although the replacement of the sensor and its cost is not very small, it is incommensurate with the cost of the exhaust gas neutralizer system. You can also save on replacement costs by doing it yourself. Many car manuals have detailed instructionshow you can replace the oxygen sensor yourself. If you know where the oxygen sensor is, then it will not be difficult for you to disconnect the faulty "lambda probe" and replace it with a new one. Remember to pull with the replacement of this important element you can't pull!

2. Check the fuel filler cap

Many drivers in most cases, when the "check engine" indication appears, will think about serious problems in the car's engine, but will not even think to check the tightness fuel system, which can be broken due to a defect or insufficiently tightened fuel filler cap. This is a very common cause of the "Check" engine icon.

The reason for the error: Leakage of the fuel system due to the passage of air, the filler cap of the fuel tank, will increase the fuel consumption of the car, for which the car diagnostic system will give an engine error by turning on the "Check engine" indication on the dashboard of the car.

What needs to be done: If, when the "Check" indication appears, your car has not lost power, and there are no sound signs of engine damage (knocking in the engine, hum, creaking, etc.), then first of all check the tightness of the gas tank. Your gas cap may be cracked or not tight enough. If the cover was not tight enough, then after tightening it all the way, continue driving the car for a while to see if the engine error disappears. To prevent an engine check from appearing for this reason, regularly check the fuel filler cap. Remember that periodically the cover must be replaced with a new one!

3. Car exhaust catalyst

The car catalyst helps the car to make the engine exhaust gas cleaner. It converts carbon monoxide and other harmful substances into harmless compounds. If your exhaust gas catalyst has become unusable, you will notice this not only when the engine badge (check) appears, but also long before that, when the car's power drops by 2 times. For example, when you press the gas pedal, the car, as before, will not have good acceleration dynamics.

Because of what the automobile catalyst can fail: if you regularly service your car in accordance with the maintenance regulations car company, then the catalyst should not fail. main reason failure of the catalyst, it is not timely replacement a faulty oxygen sensor, as well as irregular replacement of spark plugs, at the end of the expiration date. When the oxygen sensor or spark plugs are faulty, the conversion of carbon monoxide in the catalyst into harmless chemical elements stops, which leads to overheating of the catalyst, which can fail as a result.

What needs to be done: If your catalyst has become unusable, then you cannot drive the car, since the engine will not work correctly, warning about this by an indication on the dashboard with an engine icon (check). Also, your fuel consumption will be greatly increased, and there will be no engine thrust. Although replacing a catalyst is a very expensive repair, there is nowhere to go from repairs. Although there is an alternative to replacing the catalyst with a flame arrester, this is not a 100 percent option. Unfortunately, if you are not an experienced auto mechanic, then you cannot replace a faulty exhaust gas catalyst yourself. In any case, you will have to go to a car repair shop. Remember that timely replacement of oxygen sensors and spark plugs protects your catalytic converter from damage!

4. Replace MAF sensor

The mass air flow sensor regulates how much air must be added to the gasoline mixture for optimal fuel ignition. The sensor continuously informs the vehicle computer of the amount of oxygen supplied. A defective MAF sensor increases fuel consumption, increases CO2 levels in the exhaust gas, and decreases engine power and ride comfort. Also, with a faulty sensor, poor acceleration dynamics is observed. In cold weather, a car with a faulty sensor will not start well.

What are the reasons for the failure of the mass air flow sensor: Most sensor failures occur due to improper installation of the air filter during its scheduled replacement. Also, if you do not regularly change the air filter, as required by the vehicle maintenance schedule recommended by the manufacturer, the MAF sensor may fail.

What needs to be done: In theory, you can drive for a long time with a broken MAF sensor (several weeks or months). But you will notice that the longer you drive, the more fuel consumption increases. Replacing a sensor in a car service is not that expensive, since the work itself does not take much time and is quite simple. The main costs are associated with the cost of the sensor, which for some car models can be 11,000-14,000 rubles if it is an original sensor or up to 6000 rubles if it is an analog substitute. Self replacement the sensor is very simple. But due to the low cost of replacing the sensor, you can entrust this work to the master in the car service. Remember that you need to regularly change the air filter, observing the vehicle maintenance regulations!

5. Replacing spark plugs and high voltage wires

Spark plugs in a car are the main ignition parts. fuel mixture... With faulty spark plugs, the spark is incorrectly supplied to ignite the gasoline mixture. In faulty spark plugs, there is often a lack of a spark or an incorrect spark interval, which affects wrong work engine. If the spark plugs do not work properly during acceleration, especially from a standstill, you may feel small jolts.

What are the reasons for the failure of spark plugs: Most spark plugs in vehicles prior to 1996 need to be replaced every 25,000-30,000 kilometers... In newer cars, spark plugs last over 150,000 km. However, various factors related to fuel quality and driving style can reduce these spark plug replacement times.

What needs to be done: If your candles have not changed for a long time, or if you feel dips associated with ignition in the engine, then you must immediately replace them with new ones without delay. Do not try to save on untimely replacement spark plugs, since the cost of the spark plugs is not very expensive, as is the work of replacing them. Replacing old spark plugs will improve engine performance and reduce vehicle fuel consumption. Replacing spark plugs yourself is easy enough. Mostly they are easily accessible under the hood of the car. You need a regular spark plug wrench to remove the spark plugs from the engine. It is also advisable to monitor the status high-voltage wires, as over time they can become unusable and allow electricity to pass, which is transmitted to the spark plugs, which will reduce the strength of the spark. Remember that regular replacement of spark plugs, in accordance with the maintenance schedule of your car, keeps your exhaust catalyst from damage, and also improves engine performance!

.
Asks: Smirnov Kirill.
Essence of the question: How to reset the "CHECK"?

Hello! I have a Hyundai Solaris, and the "check" is constantly on! I already went to the service station and found out what the problem is. The first time they threw it to me, and now it appears again, while the behavior of the car has not changed in any way. Please tell me how I can reset it myself, because I don't want to pay for it again in the service.

If the CHECK lights up when the engine starts, then you should not worry. But if the check is on when the engine has already started, then you need to find out the cause of the error.

Diagnostics and removal of errors that occur on Hyundai Solaris may be needed by the vehicle owner in various situations when there is no desire to do this work in a certified service center.

It is not difficult to do this work, the main thing is to know what you can remove yourself errors related to the first level , that is, those that are not recorded in the ECU memory, which do not significantly affect the operation of the car and its devices. Because only a special dealer device (scanner - approx.) Can remove such errors, one of these errors is an error in the car's airbags.

When are errors removed on their own?

Among all the important malfunctions on the Hyundai Solaris, some can be reset on their own after carrying out one or another repair.

So for example error codes with 301 by 304 , talking about a spark in one of the cylinders (the last digit of the error refers specifically to the cylinder - approx.).

If the error signals a misfire in the cylinder, first of all, they look at the state of the spark plug. In the photo, the candle is the culprit of this error.

Accordingly, when these gaps are detected, the ECU will give a signal in the form of a burning "CHECK", which cannot be removed without erasing the code or resetting the terminal from the battery.

This error is completely removed, only by replacing the non-working candle with a new one, after which the error will disappear by itself.

Self-dumping of a check on Hyundai Solaris

It is possible to reset errors on your own on Hyundai Solaris thanks to the OBD-II protocol and the presence of a special adapter with a diagnostic device, be it a smartphone or a computer that supports Bluetooth wireless technology.

In order to check errors on the car, we perform the following steps:

Scan Master standard error check and reset window

Diagnostic and error reset process without OBD-II

On Hyundai Solaris, you can diagnose and remove errors without even having any additional devices at hand.

Diagnostics (this method does not work)

The method described below runs all over the Internet. We checked on our editorial machine. He does not work. We cannot delete the method, as some owners may think that it works.

Rebuttal on video:

Removing errors

• In order to remove the error, it is necessary to do the entire above-mentioned course of work from 1 to 5 points, and without turning off the ignition, press the "gas" again.
• After that, turn off and turn on the ignition, start the engine.
• If the progress of the work was done correctly, the error should be removed.

As you could see for yourself, there is nothing difficult in removing the error on Hyundai Solaris yourself, no.

In the video, the check is burning and the Hyundai Solaris stalls

When the ignition key is turned to the oN position, the serviceability of all warning lamps is checked (do not start the engine while doing this). Any lamp that fails to light should be checked by an authorized HYUNdAI dealer.

After starting the engine, check that all warning lamps have gone out. If any of them remain lit, this indicates a situation that requires attention. When the parking brake is released, the parking brake warning lamp should go out.

Control lamp low level fuel will continue to burn if the fuel supply is insufficient.

ECO (ECO indicator, if equipped) ( Automatic box gear)

ECO indicator is a system that allows you to drive a vehicle in an economical mode.

The indicator is displayed when fuel economy is used, which improves fuel efficiency.

ECO indicator (green), lights up when fuel is used efficiently in eCo oN mode.
The ECO indicator display can be turned off by pressing the TrIP button. Turning ECO mode on and off is described on the previous page.
Fuel economy depends on driving style and road conditions.
This function does not work in non-fuel-efficient driving conditions such as P (parking), N (neutral) or r reverse.
If the display shows the current fuel consumption, the eCo indicator turns off.

CAUTION

Do not observe the indicator while driving. This distracts from driving and can lead to an accident that results in serious injury.

Airbag warning lamp (if equipped)

This warning lamp comes on for about 6 seconds each time the ignition key is turned to the oN position.

This lamp also comes on if there is a malfunction in the airbag system. If this lamp does not come on or stays on after 6 seconds after turning the ignition key to the ON position or starting the engine, or if it comes on while the vehicle is in motion, have an authorized HYUNdAI dealer check the status of the airbag system.

Seat belt warning (if equipped)

As a reminder to the driver and passenger, the seat belt warning light will illuminate for 6 seconds each time the ignition key is turned to oN, regardless of whether the seat belt is on or not.

For getting detailed information refer to “Seat belts” in Chapter 3.

Control lamp insufficient pressure engine oil

1. Using caution, move to the edge of the carriageway and stop the vehicle.
2. With the engine stopped, check the oil level. If the oil level is below normal, add oil as required.

If this warning lamp continues to illuminate after adding oil to the engine, or if oil is not available, contact your authorized HYUNdAI dealer.

ATTENTION

If the engine is not stopped immediately after the low engine oil pressure warning light comes on, the engine could be seriously damaged.

ATTENTION

If the low engine oil pressure warning light comes on while the engine is running, it is possible serious damage engine. This lamp comes on if the pressure in the lubrication system drops below normal. Normally, it lights up when the ignition is turned on and then goes out after starting the engine. If the low oil pressure warning lamp illuminates while the engine is running, this indicates a serious malfunction.

In such a situation, stop the vehicle as soon as it is safe to do so, stop the engine and check the oil level. If the engine oil level is below normal, add oil to normal and start the engine again.

If the lamp remains on while the engine is running, stop it immediately. In any case, if the low engine oil pressure lamp comes on while the engine is running, you must have your authorized HYUNDAI dealer check the condition of the vehicle before starting the engine again.

Parking brake and insufficient level warning lamp brake fluid

This lamp comes on when the parking brake is on and the ignition key is in the START or oN position. This lamp should turn off when the parking brake is released with the engine running.

Insufficient brake fluid warning

The glow of this warning lamp indicates an insufficient level of fluid in the brake reservoir.

If this indicator lamp is on:

1. Be careful to take the nearest safe place and stop the car.
2. With the engine stopped, immediately check the brake fluid level and top up as required.
After that, check all elements of the brake system for leaks.
3. It is not allowed to continue the movement of the car if leaks were found, if the control lamp continues to burn, or if the operation of the braking system is abnormal. The vehicle should be towed to have the braking system checked and the necessary renovation works by an authorized HYUNdAI dealer.

This vehicle is equipped with a dual diagonal braking system.

This means that even if one of its lines fails, the brakes on two wheels of the car will be in working order. In such a situation, to stop the car, you will need greater stroke brake pedal and more effort on it.

In addition, the braking distance of a vehicle with only part of the braking system will be longer than normal. If the brakes fail while the vehicle is moving, downshift for engine braking and stop the vehicle as soon as it is safe to do so.

To check the operation of the parking brake warning lamp and insufficient brake fluid level, make sure that it illuminates when the ignition key is turned to the oN position.

CAUTION

It is dangerous to drive while the warning lamp is on. If the brake warning lamp continues to illuminate, immediately have an authorized HYUNDAI dealer check the brake system and carry out repairs.

Antilock Brake System (ABS) Warning Lamp (If Equipped)

This lamp comes on when the ignition key is turned to the oN position and goes out after about 3 seconds if the system is working properly.

If this lamp stays on after turning on the ignition, lights up while driving, or does not light up after turning on the ignition, this indicates a possible malfunction of the AbS system.

In such a situation, contact an authorized HYUNdAI dealer as soon as possible to check the condition of the vehicle.

The vehicle's braking system will continue to function, but without anti-lock braking support.

Control lamp electronic system brake force distribution (eBD)

If two warning lamps light up at the same time while driving, the vehicle has both AbS and ebd systems faulty.

In this case, the AbS system and the main brake system may operate abnormally. Please contact an authorized HYUNdAI dealer as soon as possible to check the condition of the vehicle.

CAUTION

If the ABS warning lamp and the brake warning lamp come on and remain lit at the same time, this means that the vehicle's braking system will not function normally during heavy braking. In this case, avoid driving on high speed and sharp braking. Ask an authorized HYUNDAI dealer to check the condition of the vehicle as soon as possible.

NOTE

If the ABS or eBD warning lamp comes on and remains on, it may indicate a malfunction of the speedometer or trip odometer / odometer. In such a situation, contact an authorized HYUNDAI dealer as soon as possible to check the condition of the vehicle.

Electronic Stability Program (ESP) Indicator (If Equipped)

This indicator comes on when the ignition key is turned to the oN position and should go out within about 3 seconds. When the eSP system is on, it monitors the vehicle's driving conditions. If conditions are normal, the indicator for this system is off. When entering a slippery road surface or when the grip of the tires decreases, the eSP system starts to work.

At the same time, its indicator starts blinking, informing about the operation of this system.

But in the event of a malfunction of the eSP system, the indicator lights up and does not turn off. In such a situation, go to an authorized HYUNdAI dealer to have the vehicle checked.

ESP Disable Indicator (If Equipped)

This indicator comes on when the ignition key is turned to the oN position and should go out within about 3 seconds. Press the corresponding button to deactivate the eSP system. The indicator will light to indicate that this system is disabled. If this lamp is lit when the eSP system, the system may have a malfunction.

Direction indicators

Flashing green arrows on the dashboard show the direction shown by the direction indicators. If such an arrow lights up but does not flash; flashes more often than usual or does not light up at all, this indicates a malfunction of the direction indicator system. To fix it, contact an authorized dealer.

On indicator high beam

This indicator comes on when the high beam headlights are turned on or when the high beam is switched on briefly with the turn signal control knob.

Side light indicator

On indicator fog lights (in the presence of)

Rear fog light indicator (if equipped)

Rear fog light reminder signal (if equipped)

A reminder signal will sound if the rear fog lamps are on when the driver's door is open while the engine is stopped.

Selected range indicator (if available)

Switch indicator mechanical box gear (if available)

This indicator tells the driver which gear to select, which saves fuel.

For instance:

: Indicates that it is desirable to downshift to 3rd gear (2nd gear is currently on).
: Indicates that it is desirable to downshift to 3rd gear (4th gear is currently on).

NOTE

When the system is not working properly, the up / down arrow indicator and the gear number are not displayed.
When eco-oFF is selected on the trip computer, the manual transmission shift indicator will not be displayed.

Battery charging indicator lamp

This warning lamp indicates a malfunction of either the alternator or the battery charging system.

If it lights up while the vehicle is moving:

1. Move the vehicle to the nearest safe place.
2. With the engine stopped, check the tension of the alternator drive belt and its breakage.
3. If the belt tension is normal, there is a fault somewhere in the battery charging system. Contact an authorized HYUNdAI dealer to rectify the problem as soon as possible.

Low fuel level warning lamp

This lamp indicates that fuel tank the car is almost empty. In such a situation, it is necessary to refuel the vehicle as soon as possible. Continuing to drive while the low fuel level warning lamp is on, or when the fuel gauge pointer is below the “E” mark, may cause engine cylinder flashes to skip and damage the catalytic converter.

Control lamp for insufficient liquid level in the washer reservoir (if equipped)

When this warning lamp lights up, it indicates that the washer reservoir is almost empty. Fill the reservoir as soon as possible.

Engine malfunction warning lamp

This warning lamp is a part of the engine management system that monitors the status of various elements of the exhaust gas emission control system. If this lamp comes on while the vehicle is moving, it indicates a possible malfunction somewhere in this system.

In addition, this lamp comes on when the ignition key is turned to the oN position and then goes out a few seconds after starting the engine. If it comes on while the vehicle is in motion, or does not light up after turning the ignition key to the ON position, contact your nearest authorized HYUNdAI dealer to check the system status.

In general, the vehicle may move, but you should immediately contact an authorized HYUNdAI dealer to check the system status.

ATTENTION

Continued driving with the exhaust gas emission control system malfunction indicator lit can damage the system's components, which will affect the vehicle's performance and / or fuel consumption.

ATTENTION

If the emission monitor malfunction indicator illuminates, the catalytic converter may be damaged, possibly resulting in loss of engine power.

Have the engine management system checked by an authorized HYUNDAI dealer as soon as possible.

Engine coolant temperature warning lamp (if equipped)

The warning lamp comes on when the engine coolant temperature exceeds 125 ± 2.5 ° C (257 ± 4.5 ° f).

It is unacceptable to continue the trip with an overheated engine. If the vehicle engine overheats, refer to “If the engine overheats” in section 6.

NOTE

If the engine coolant temperature warning lamp illuminates, it indicates overheating, which could cause engine damage.

Tailgate / tailgate opening warning lamp

This warning lamp comes on if the boot lid / tailgate is not closed properly, in any position of the key in the ignition lock.

Control lamp for signaling the open door

This indicator lamp comes on if the door is not closed tightly, at any position of the key in the ignition lock.

Door open indicator (if equipped)

The indicator shows which door is open.

Immobilizer operation indicator (if equipped)

This lamp comes on when the key with the immobilizer system transmitter is inserted into the ignition switch and turned to the oN position to start the engine.

At this point, you can start the engine. After starting, the lamp will go out.

If this lamp blinks when the ignition key is in the oN position before starting the engine, have an authorized HYUNdAI dealer check the system.

With electronic key system

If any of the following situations occurs in a vehicle equipped with an electronic key, the immobilizer warning lamp comes on, starts flashing or goes out.

When the electronic key is in vehicleif the ACC or oN modes are activated by the engine start / stop button, the indicator lights up. If the electronic key is not in the car, when the engine start / stop button is pressed, the warning lamp will flash for a few minutes, reminding that you will not be able to start the engine.
If the warning lamp goes out 2 seconds after turning the ignition key to the oN position, this may indicate a system malfunction. In this case, ask an authorized HYUNdAI dealer to check the vehicle.

You will need: all the tools required to remove the left side sill rear trim and trunk lining, as well as a 10-inch socket. 1. Remove the front and rear lining of the left p ...

Relief of pressure in the power supply system of gasoline engines
Remember that gasoline is in the highest degree flammable liquid! Observe all fire safety precautions when handling power components. Do not smoke! Stay away from the month ...

Camshaft. Camshaft axles
1. Remove the axis of the rocker arm and rocker arms (p. 2.8). 2. Remove the driven pulley camshaft (p. 2.6.14-2.6.16). 3. Remove the camshaft from the cylinder head towards the flywheel. Shaft carefully ...